Jump to content
SAU Community

Recommended Posts

I'm trying to work out the best way to go with tyres for my stag. I'll be running them on an 18x9.5 rim, and my options are kuhmo ku31s, federal 595-ss, Yokohama Advan A-13 and Nitto NT05. I live in Tassie so need something which can handle a variety of conditions, and good grip in the wet is really important. Any thoughts or experiences you have had with any of these tyres would be awesome.

Thanks

Tim

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/
Share on other sites

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

I'm running KU31's in 245/40/18. Best rubbers I've had ever. Then again all the cars I've had in the past always had regular passenger tyres geared towards comfort/NVH.

Yoko Advan is probably the best but I suspect they'll cost more too? Ku31's are great value...

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5958277
Share on other sites

I've emailed Taleb tyres and they quoted me $260 a tyre for the Yokohama's. They are getting me a quote on the Kuhmo's. That's exactly the size I'll be looking at, so it's good to know you've found them good.

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5958316
Share on other sites

I've emailed Taleb tyres and they quoted me $260 a tyre for the Yokohama's. They are getting me a quote on the Kuhmo's. That's exactly the size I'll be looking at, so it's good to know you've found them good.

I was quoted around 185 per corner for the ku31s from tempe tyres...

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5958331
Share on other sites

AFAIK Federal 595 doesn't have great wet weather grip. I'm looking at the new Hankooks when I get my tires sorted, or maybe Silverstones, but only heard good things about the KU31s.

Aaron does love his Pirellis too...

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5958747
Share on other sites

AFAIK Federal 595 doesn't have great wet weather grip. I'm looking at the new Hankooks when I get my tires sorted, or maybe Silverstones, but only heard good things about the KU31s.

Aaron does love his Pirellis too...

lol indeedidoo

talebtyres. an SAU Trader who is very competitive.

also "Jezza boi" on here gets federals for cheap

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959204
Share on other sites

one site....and nearly at the same price as hangkangs

www.tirerack.com

shipping is about $350 US

So, any legal issues for bringing in tyres from USA? Do they have/need ADR's?

There are some cheap tyres on there that, even with shipping, work out to be good value landed. Maybe a heap of us put together a container load... LOL

Edited by Commsman
Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959300
Share on other sites

Im running Pirreli PZero 18" semislick tyres on my Stagea

Best car tyre Ive ever sampled.

Got them $150each from SAU trader TalebTyres; they sold a container load of old stock on ebay.

Treadwear rating of 80 !! Super soft 'road' tyre, compared to KU36 semislick tyres that have treadwear rating of 180.

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959595
Share on other sites

Dont get to wrapped around the axles with tread wear ratings, the manufacturer does its own testing and write what they want really, also old stock will be dried up and hard, check date of manufacture.

I wouldnt buy tyres from Australia anymore when I can get tyres for $160 in the US that cost $450 here, and even with $350 delivery fee it still cost less, $990 as opposed to $1800.

Until I can get them for the same price my money goes to helping the US economy.

http://www.tirerack.com/tires/TireSearchResults.jsp?skipOver=true&width=265%2F&ratio=40&diameter=18

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959660
Share on other sites

ive got the Federal 595's and yes they are very good bang for buck but i think i'm gonna go something more grippy............. not that im complaining about them at all i've run them on my cars for the last 6 years but i think the Stagea needs better

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959812
Share on other sites

Thanks for all the info guys, I have contacted Tempe Tyres for a price, and the have given me the best price so far ($200 each delivered), BUT they have also said I should be looking at 255/35 or 265/35 instead of the 245/40 to go on the 9.5 inch rim. Which size would be the best way to go???

I contacted tirerack.com as well, and need to send them some more info to get the quote, so will do that this morning too.

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5960512
Share on other sites

Best to keep to the same overall height so as not to put your speedo out any further unless you don't care about that :whistling:

Try this tyre calculator: http://www.kouki.co....size-calculator

BTW, I'm running Mastercraft Touring LSR 245/45R18 96V. They have treadwear rating of 520. I ran them on my Magna and got 70,000km out of a set of four with constant rotation at 5000km. They have a symmetrical pattern so can be rotated in the traditonal pattern rather the asymmetrical method of front/rear on the same side. I paid $265 per tyre. I'm impressed with them but have only done 1000km so far.

Quite a difference in car weight between the magna at 1300kg and the stagea at 1720kg though!!!!

Thanks for all the info guys, I have contacted Tempe Tyres for a price, and the have given me the best price so far ($200 each delivered), BUT they have also said I should be looking at 255/35 or 265/35 instead of the 245/40 to go on the 9.5 inch rim. Which size would be the best way to go???

I contacted tirerack.com as well, and need to send them some more info to get the quote, so will do that this morning too.

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5960801
Share on other sites

I've used the tyre calculators before to check rolling diameter, trouble is there is no allowance for wheel size and therefore potential stretch. That one did have the info on recommended size though which was useful, looks like I should be going for 255s.

Any other thoughts or experiences are useful though!

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5960978
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • One other thing worth mentioning when I did this job I only jacked up the driver side as I was only doing work there, but from what I understand both wheels should be in the air when removing the sway bar links?
    • Yep it's an r34. Usually people remove struts without removing the front upper control arm (fuca is what i assume this is?) So not sure why mine wouldn't fit. I know on my other car I did a similar job and it wouldn't fit until I removes the ball joint nut even though I didn't remove it prior.   The upper arm doesn't seem to be in the way (the part that's bolted to the chassis. The part that's bolted onto the j arm I'll check that out though.   I was going to compress the spring and put it in with the compressor attached but not sure if it will work  Haven't seen anyone do it.
    • I have a small lip on the boot of the E90 and I've been toying with the idea of trying to mould it in to the boot to remove the gaps. I guess shaving the seams? No idea what the terminology is here.  What I'm wondering is, if it's current double sided taped down, what would I do to more permanently attach it so it makes a good base for the filler? It only has edges so no way to bolt it down unless I add some braces. I've done a lot of fibre glassing in my time so that's nice and easy but I'm not sure what my options are here.  Sorry, this is the best pic I have and I'm 4 million ks from home ATM.  
    • Based on this comment I went googling. A052's in the sizes I want are certainly not cheap, but I couldn't find anything in the V70A anywhere. How much do they run/where do they get sourced from? From what I know (nothing but internet searches and reviews etc) the R888 has pretty much fallen off from anyone's actual use, and the AO52 is the king of "road legal" rubber. Nobody is driving around on their daily for Z221, AO050, DZ03G. At that point, for purely track only tyres - Why not buy actual slicks? Why does nobody actually do that anyway?
    • This an R34? It shouldn't matter though - it should be the same as on any of the others, and by "any of the others" I mean R32, because that is the car that I have had the front end apart on about 50 times this year. Sometimes, it is much easier to get the lower shock eye onto that pin when: a) you have the upper shock nuts backed off a few turns so you can wiggle it a bit more freely. When they are tight the bottom of the strut is much harder to move that _leeeetle_ bit you might need it to to win the fight. b) you have the outer bolt(s) from the FUCA out and so you can move the lower pin around freely too. Then, all you have to do is put the upper arm back on when you've got the rest back together, and this is where jacking under the balljoint can help.
×
×
  • Create New...