Jump to content
SAU Community

Recommended Posts

I'm trying to work out the best way to go with tyres for my stag. I'll be running them on an 18x9.5 rim, and my options are kuhmo ku31s, federal 595-ss, Yokohama Advan A-13 and Nitto NT05. I live in Tassie so need something which can handle a variety of conditions, and good grip in the wet is really important. Any thoughts or experiences you have had with any of these tyres would be awesome.

Thanks

Tim

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/
Share on other sites

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

I'm running KU31's in 245/40/18. Best rubbers I've had ever. Then again all the cars I've had in the past always had regular passenger tyres geared towards comfort/NVH.

Yoko Advan is probably the best but I suspect they'll cost more too? Ku31's are great value...

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5958277
Share on other sites

I've emailed Taleb tyres and they quoted me $260 a tyre for the Yokohama's. They are getting me a quote on the Kuhmo's. That's exactly the size I'll be looking at, so it's good to know you've found them good.

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5958316
Share on other sites

I've emailed Taleb tyres and they quoted me $260 a tyre for the Yokohama's. They are getting me a quote on the Kuhmo's. That's exactly the size I'll be looking at, so it's good to know you've found them good.

I was quoted around 185 per corner for the ku31s from tempe tyres...

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5958331
Share on other sites

AFAIK Federal 595 doesn't have great wet weather grip. I'm looking at the new Hankooks when I get my tires sorted, or maybe Silverstones, but only heard good things about the KU31s.

Aaron does love his Pirellis too...

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5958747
Share on other sites

AFAIK Federal 595 doesn't have great wet weather grip. I'm looking at the new Hankooks when I get my tires sorted, or maybe Silverstones, but only heard good things about the KU31s.

Aaron does love his Pirellis too...

lol indeedidoo

talebtyres. an SAU Trader who is very competitive.

also "Jezza boi" on here gets federals for cheap

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959204
Share on other sites

one site....and nearly at the same price as hangkangs

www.tirerack.com

shipping is about $350 US

So, any legal issues for bringing in tyres from USA? Do they have/need ADR's?

There are some cheap tyres on there that, even with shipping, work out to be good value landed. Maybe a heap of us put together a container load... LOL

Edited by Commsman
Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959300
Share on other sites

Im running Pirreli PZero 18" semislick tyres on my Stagea

Best car tyre Ive ever sampled.

Got them $150each from SAU trader TalebTyres; they sold a container load of old stock on ebay.

Treadwear rating of 80 !! Super soft 'road' tyre, compared to KU36 semislick tyres that have treadwear rating of 180.

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959595
Share on other sites

Dont get to wrapped around the axles with tread wear ratings, the manufacturer does its own testing and write what they want really, also old stock will be dried up and hard, check date of manufacture.

I wouldnt buy tyres from Australia anymore when I can get tyres for $160 in the US that cost $450 here, and even with $350 delivery fee it still cost less, $990 as opposed to $1800.

Until I can get them for the same price my money goes to helping the US economy.

http://www.tirerack.com/tires/TireSearchResults.jsp?skipOver=true&width=265%2F&ratio=40&diameter=18

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959660
Share on other sites

ive got the Federal 595's and yes they are very good bang for buck but i think i'm gonna go something more grippy............. not that im complaining about them at all i've run them on my cars for the last 6 years but i think the Stagea needs better

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5959812
Share on other sites

Thanks for all the info guys, I have contacted Tempe Tyres for a price, and the have given me the best price so far ($200 each delivered), BUT they have also said I should be looking at 255/35 or 265/35 instead of the 245/40 to go on the 9.5 inch rim. Which size would be the best way to go???

I contacted tirerack.com as well, and need to send them some more info to get the quote, so will do that this morning too.

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5960512
Share on other sites

Best to keep to the same overall height so as not to put your speedo out any further unless you don't care about that :whistling:

Try this tyre calculator: http://www.kouki.co....size-calculator

BTW, I'm running Mastercraft Touring LSR 245/45R18 96V. They have treadwear rating of 520. I ran them on my Magna and got 70,000km out of a set of four with constant rotation at 5000km. They have a symmetrical pattern so can be rotated in the traditonal pattern rather the asymmetrical method of front/rear on the same side. I paid $265 per tyre. I'm impressed with them but have only done 1000km so far.

Quite a difference in car weight between the magna at 1300kg and the stagea at 1720kg though!!!!

Thanks for all the info guys, I have contacted Tempe Tyres for a price, and the have given me the best price so far ($200 each delivered), BUT they have also said I should be looking at 255/35 or 265/35 instead of the 245/40 to go on the 9.5 inch rim. Which size would be the best way to go???

I contacted tirerack.com as well, and need to send them some more info to get the quote, so will do that this morning too.

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5960801
Share on other sites

I've used the tyre calculators before to check rolling diameter, trouble is there is no allowance for wheel size and therefore potential stretch. That one did have the info on recommended size though which was useful, looks like I should be going for 255s.

Any other thoughts or experiences are useful though!

Link to comment
https://www.sau.com.au/forums/topic/373541-tyres/#findComment-5960978
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It’s not driver training though, it’s just an online questionnaire and $65 
    • Almost certainly no. In Vic they have this crazily restrictive set of rules for mods that is usually interpreted as "no more than 2 modifications to the intake system". And they're not real hot on upgraded turbos at all, let alone high mounts. That means if you fit a bigger (particularly front mount) intercooler (which is, of course, almost impossible to go without) then you're already down to one other mod allowed. You'll really benefit from hearing from someone from Vic who knows the real state of play. Even better, speak to an automotive mods certifying engineer from Vic. You can actually read the rules from the govco websites yourself, too.
    • Well, I'm not clicking on a link to f**king bookface (never have, never will), so I can't really know what the complaint here is about, but.... There's nothing particularly wrong with forcing people to have a higher license category to drive super/hypercars. Note that the laws are not about modified cars - only listed standard cars, because there are not supposed to be cars modified enough to meet the law's category limits anyway. If you have a modified car that falls into those power limits you're already in trouble anyway. What is wrong is the bullshit on-line "test" to get the upgrade, instead of any actual work and training.
    • Meh Don't have Facebook anymore but watched a YouTube about it, they also talked about them not being able to use and "sports" modes, not really sure how they would enforce that apart from logging the Db for the cars that have exhaust valve activation in sports mode Apart from all the high end sports cars and supercars that make the sort of power they are talking about standard, I cannot see it bothering anyone else, unless of course road side tests now include having a dyno and scales on site to test the power output vs weight What is it? 500hp per ton? And if the only additional cost is $60 or so, as the video stated, I cannot see that being a war stopper for the people that outlay a few hundred thousand dollars on a performance car In fact, I see it would be a ego boost for some, because they have a "special" drivers licence for a "special"person with a "special" car And if I did have a modified car that made over the limit, there's no way in hell I would apply for a "special" licence, I could see the authorities checking your licence against your rego, so if old mate applied for a licence, but owns a, say, R33 Skyline, that may trigger an inspection of said car as to why, and how, that old mate has a R33 that would fit the bill of making over 500hp per ton Again, meh, not something I believe will be a real issue to 99.9% of people
    • https://www.facebook.com/groups/mechanic.com.au/permalink/2029367984190485/?   Here we go…. 😢
×
×
  • Create New...