Jump to content
SAU Community

Jjr Short Shifters

luvpsi
 Share

Recommended Posts

89CAL Grand Master

89CAL

Posted
Posted

make your own. Thats what I did.

pulled the outer metal section of the shifter off (its seperated from the centre part by rubber) and cut the thread from the outer section and welded it onto the inner section. Solid short shifter, Cost = $0

Replaced bush that sits on the bottom as well. Next to no slop now and feels alot nicer.

If you have access to some tools + a welder then its a cheap option if you really want to do it. I had a spare one lying around so I just thought I'd give it a go.

SargeRX8 Grand Master

SargeRX8

Posted
Posted

I have a short shifter on my R33. From what I recall it doesn't even have circlips... It is just the shifter and a series of bushes then a clamp to hold it all in place. The shift and gear control was awesome. The sound of a solid shifter shit me up the wall. The whirring noise that the shifter throws up is terrible. The Nismo shifters have a shorter throw than stock and do not let this noise through. Any solid shifter is going to let noise through, both skylines Ive had(R33's) used the same shifter and had the same noise. No matter how much rubber shit I put around it. Ive tried a plastic, stock and metal gear knob. Metal was the worst the stock one helps get rid of it and the other drift one didn't really do anything.

http://www.ebay.com.au/itm/Nissan-Skyline-Short-Shifter-Kit-R32-R33-/320741118270?pt=AU_Car_Parts_Accessories&hash=item4aada9113e

Mine looks like this. Pretty much exactly the same. Only reason I don't use it anymore is because my current stock shifter feels fine enough and not worth the extra noise you get from these shifters. BELIEVE ME you WILL notice it. Unless you're deaf or have your music always on, its audible. My car isn't quiet either.

SargeRX8 Grand Master

SargeRX8

Posted
Posted

Ive got 3 layers. One from my old car, the current and one wrapped around the base. Still was shit lol. Its the vibration and noise which travels through the stick which is shit. They should be dampened inside but that would defeat the point of a solid shifter...

89CAL Grand Master

89CAL

Posted
Posted

Hmmm I've never really noticed any extra noise. Its not rediculous anyway. If I had to say anything I'd say its a bit noisey under low revs high load (say in 4th gear at 30kmh) but other then that I dont find it to bad.

I got a brand new boot to go directly on the gearbox (as these always seem to be stuffed) and then ditched the lower portion of the rubber boot that sits in your car because my shifter was hitting it, I'm pretty sure I have an SR20 manual shifter but I'm not sure if its just that slight bit different or if somewhere during my modification I've bent it slightly. But anyway I'm happy with how it turned out :)

Tangles Grand Master

Tangles

Posted
Posted

thats the one Ive bought for the R32-rb26, using VL turbo gearbox.

might try to install it tomorrow - havent worked on the car for a month so probably time to give installation a go

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

I actually had my short shifter taken out all those years ago.

You tend to out shift the box too often due to the short through, which resulted in crunching the gearbox quite often.

Went back to stock and much less chance to out shift the synchros etc. Just something to think about.

I dont have a lot of mechanical sympathy :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      Always have 😁
    • luke gtr
      So i brought a boat...

      By luke gtr · Posted

      Jump into the wasteland. Plenty of random posting/chatting going on in there.
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      I did not go to GTR Festival. It's quite a long drive and the car wasn't dialed in yet. I also wanted to see how the racing portion went before going. From what I can tell the classes were not heads up, index, or bracket - just whoever has the quickest ET wins. Never heard of that sort of thing before and maybe some people like it but it's not my cup of tea. I don't suspect I'll go if that is how the racing is done. I did get the car out three times and had issues each time. Some were my error - haven't raced the car in over two years - and others were parts. Had trouble getting the clutch to slip correctly and remembering how it was set up in the Haltech. Broke some drivetrain parts as well that couldn't be fixed in a couple days to get back out. Season definitely didn't end the way I wanted but at least the bearings are still fine! Not a fleck of material in the filter. Really hoping next year is the year I can actually test this car properly. 
    • MBS206
      HY51 Fuga Hybrid

      By MBS206 · Posted

      find it funny everyone claims different fuel chains, do different things with their fuel blah blah blah. We don't have that many fuel terminals in Australia. The fuel tanker trucks drive into the terminal, fill up, and drive directly to the service station and dump out. The majority of fuel you get, is coming out of the same terminals. The variation is actually at the individual service stations and how good their tanks are, as well as how much turn over they actually have. Older fuel stations, that haven't had their tanks replaced are going to end up with the worst fuel. Also a lot of older stations have shit design, and shit maintenance, and end up with more water absorption into the tank. This is when you then get a bad batch of fuel. Other shit things happen, like tanker drivers have a f**k up, and starting to unload the wrong compartment on their truck into the wrong tank. 
    • r32-25t
      MLR's Bogan cruise ship

      By r32-25t · Posted

      Yeah go with that one 
×
×
  • Create New...