Jump to content
SAU Community

Recommended Posts

I got my car tuned at saddin yesterday he said my car is running to rich couldn't tune it properly.

Mods I've got

Fmic

2-1/2 inch exhaust

Apexi pod

Walbro fuel pump

Stock turbo

Stock afm

Avc-r

I just put in s15 injectors b4 I got it tuned I think they are 440cc is that the problem or afm need some help ? How would I stop running it so rich?

Link to comment
https://www.sau.com.au/forums/topic/373679-r33-running-rich-as-fk/
Share on other sites

no, emts (and others) mean, what ECU are you using to support the different injectors?

you cant just change injectors and expect the ECU to figure it out, you need to tell the ECU what injectors you have, if non-std 370cc

your options are

remap the stock ECU

get a piggyback ECU option

get a stand alone ECU

either will let you run larger injectors. with STD ECU and anything other than 370cc injectors your car will run like ass and it's a timebomb

im surprised the tuner didnt check or ask you or refuse to tune it with std ecu and different injectors

did you tell him it had non-std injectors? did he ask what ECU

or have you just failed to list it here?

there is nothing to figure out or nothing to do your head in.

it is a simple yes / no question.

if you have a remapped ecu, aftermarket ecu, piggyback

a) get it remapped / tuned again

if you have the standard ECU

a) remap the stock ECU

b) get a piggyback ECU option

c) get a stand alone ECU

or your last option

remove the aftermarket injectors

YOU

CANNOT

RUN

NON

STANDARD

INJECTORS

WITH

A

STANDARD

UN-MODIFIED (not remapped)

ECU

yeah you dont need 440cc injectors with std turbo

the std turbo will run out of efficiency before the stock injectors do

so sell them and spend the money you get back on a piggy back or ECU remap

the piggyback or ECU remap will add a bucket load more average power everywhere and make the car heaps quicker

you should peak 200rwkw with those mods + ECU remap or piggyback

but the average power will be up heaps more over the std ECU and boost controller

plus youll have to avoid the factory boost R&R around 10psi so its a crap setup even if you just ditch the injectors and tune it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
    • Was that Australia Delivered Duncan? Does it have siren etc?   I used to have remote start on an old 32 two decades ago, it was a cool feature. I used to wake up early in winter for work. Start it and by the time i was out the door a few minutes later the engine was warmed up and the heaters had the car toasty. It was great.    I don’t mine the ambience lighting.  I drive a western star and it has footwell lights and ambient lighting and it’s great! From the pics of seen of them installed in a skyline I think it’s a nice touch 
×
×
  • Create New...