Dividing Up Vacuum Hoses For Teeing Off Things

[mattis96]

hey guys i need some advice on the best way on dividing up the the vacuum hoses for my car.

i have the 3 nipples on my intake plennum that i can use, but need to connect about 7 things up.

Things to connect are

Map sensor for haltech

Profec b spec 2

sard fpr

wastegate

turbosmart blow off valve

water meth injection

2 boost gauges (dash and aftermarket)

Or does it not matter that much which ones i tee off as they all have the same pressure going through them?

Edited August 11, 2011 by mattis96

[tridentt150v]

Use the one that the std boost gauge uses. I think I used the one at the front of the plennum for mine and it works fine. I have HKS evc IV, water meth, a/m boost gauge, std boost gauge, on mine.

The wastegate should go off the profec b box [assuming it has one like the HKS? near the aircleaner somewhere and then to the wastegate. The other side goes from the wastegate to the intercooler tubing nipple.

I wouldn't bother running this across the motor to the other ones, shorter is better.