Jump to content
SAU Community

Recommended Posts

Alright cool, I was planning on doing it that way but wasn't sure if it'd be the correct reading as I tried to test the VCT with the hand controller but when I unplugged the plug for the VCT, hand controller still told me it was activating and deactivating haha

Would using a multimeter be a more accurate measure?

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

I'm pretty sure my car has been a manual all along though. Dash cluster is a manual one, the stock ECU that came out was a manual one and there was only one other owner of the car before me. Weird.

.....don't forget the half a dozen owners in japan before that guy too...

Ahhh I see. No dramas then, on my lunch break I'm gonna go sit in my car and start mashing the throttle without starting it haha

On one hand, I kinda hope the TPS is the problem as I'm starting to get over the fact my car barely makes more power than a midly-fettled GTS-t pinch.gif

Just a bit of an update.

Car overheated today as the rubber hose connecting the turbo water line to the block split and caused coolant to spray everywhere. Car had to get towed.

Which raises the question, if there was an issue with the cooling system, how much would this affect timing and if it does, what hardware will it affect to cause the timing issue (eg. the turbo becomes heatsoaked and in turn superheats the air)

Also worth noting the car has run hotter than normal since the timing issue surfaced, so not sure if timng issue and overheating issues are 2 isolated problems or are connected somehow.

Ideas and thoughts would be great :)

  • 5 months later...

Oh forgot to mention, knock usually occurs in the upper RPM range. At first we thought it was a VCT issue as that's when the knock starts becoming very unstable but we've ruled out the VCT by running it both plugged and unplugged.

Also worth mentioning that the fuel rail around cylinder 4,5 anıd 6 has gone from the factory greeny-metallic colour to a heated titanium sort or bluey-rainbow colour.

if the car is getting hot, and is underpowered, then there is a very good chance that your timing is retarded.

Your CAS might be stuffed.

I'd be checking the timing with a timing light, and then if you do adjust the cas, I wouldn't be driving it around hard until a retune is done.

Ok thie relates to my last post ... Tried to copy info and add using the phone ... Didnt work ...

Anyhow, just thought, if there was no change between having vct connecyed or not, could that not indicate that the vct is not working?

Also, excess fuel flow is iften used the keep the fuel rail cool. The fuel rail gettinh hot to tye point if discolouraton my indicated that you hage reduced flow out of the rail and hence cooling flow to the rear injectors or you have something making it hot. This would heat the fuel and change the fuel flow out of them. If up, the ecu would lean out the others if flow goes down, well theres your knock.

Just my thoughts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
    • It's about time I start work on my sun tan. So I knocked up a few parts that will all combine together to become my new power steering reservoir. Now just to produce an abundance of UV and IR rays while melting a heap of bits of alu to become one... Well, that's after I put one more hole in it for the return line to plumb to. It likely won't be this weekend, as Sunday I'm meant to be in doing some last minute stuff to the AMG race car, and the weekend after will be filled with non my Skyline stuff, followed by Bathurst 6 hour. So I don't expect to get to melt metal for at least 3 weeks.   I also managed to stuff up and start cutting the hole for the res to pump pipe on the wrong side of the line... It means instead of the lines being nice and tight against the inner guard, they'll be out off the guard.    The size of it means I should end up with about 1.8L of power steering fluid, and still have space for another half a litre before it reaches the overflow/breather. This is wayyyyyyy more capacity than factory, which should help keep Powersteer oil temps lower, and the design hopefully allows it to prevent any aerated oil being able to makes its way down to the bottom as it'll have a couple of baffles and some hopeful trickery to force air bubbles away from the bottom.
    • The log you did with ECU voltage, can you log the other things too like rpm and oil pressure? Need all that info together to compare easily
×
×
  • Create New...