Can Anyone Tell Me What The Part Is Called And Where I Can Buy This Washer

[R33 GTS TURBO]

What is this called its was located under the turbo when i was replacing the turbo gasket and then when i removed the 2 bolts all to coolant came out.

Also when i removed the back bolt i noticed it only had 1 copper washer on it whereas the other one had 2 copper washers.

[JonnoHR31]

its the turbo water feed banjo bolt. you'll usually get away with just 1 washer. i think i have a few lying on the pavement in my backyard if you really want one....

[StevenCJR31]

they are off the shelf copper washers, they "crush" a little bit when tightened , new ones arent expensive

[R33 GTS TURBO]

Thanks for that do you have an idea as to where i can buy them, I tried Nissan Parts, even repco but neither stocked them.

Also thanks for the offer Jonno i might take you up on your offer if i cant find a place to buy some.

[Pal]

need two washers per banjo fitting, the other one is still stuck to the turbo at the back.

[kingscorp]

You can reuse them, but will need to sofen them first.

Pick them up with pliers, put them over a flame unitil hot then straight into cold water (running tap)

This will make them soft again, I have reused mine about 6 times

Ash

[R33 GTS TURBO]

The washer is not stuck, checked it all out.

And thanks for that kingscorp will bear that in mind when i put it back together

[StevenCJR31]

google copper washers like i did. . . blackwoods was one of a few suppliers that came up

[Pal]

should be able to get them at any good auto shop. we got grab kits of them at work

musta dropped it otherwise you would have a coolant leak. and as kingscorp said, they must be annealed first before using them again