Jump to content
SAU Community

Recommended Posts

Hi everyone,,

I have a set of TE37 Bronze rims,,, Selling the set for $500 ono,

Here are some pics,,,

and specs

Front :

17" x 7.5 (+30 offset)

Rear:

17" x 8.5 (+30 offset)

I'm in brisbane,,

Email me at : - afroguy@mailcity.com

Or phone: - 0401 453 756

Link to comment
https://www.sau.com.au/forums/topic/37386-for-sale-17-te37-rims-damaged/
Share on other sites

Front Rims,,

Here are pics of one of the front rims

http://www.skylinesaustralia.com/forums/at...achmentid=10806

http://www.skylinesaustralia.com/forums/at...achmentid=10807

Here is a pic of the other front rim

this is the most damaged,,, i havent checked to see if it can be repaired or not,,

http://www.skylinesaustralia.com/forums/at...achmentid=10808

http://www.skylinesaustralia.com/forums/at...achmentid=10809

The Rear Rims dont seem to have too much damage,

sratches/dent on the outer edges

http://www.skylinesaustralia.com/forums/at...achmentid=10810

http://www.skylinesaustralia.com/forums/at...achmentid=10811

http://www.skylinesaustralia.com/forums/at...achmentid=10812

http://www.skylinesaustralia.com/forums/at...achmentid=10813

Let me know what you think,

I don't know if they can be bronze anodized anywhere,

might be a better option to get it powdercoated white or gunmetal grey,, which is a much cheaper option,,,

anyways,,

let me know if anyone is interested in having a closer look at these rims,,

best time for me is on the weekends,,,

i'm in brisbane

Hi everyone,,

I have a set of TE37 Bronze rims,,,  Selling the set for $500 ono,

Here are some pics,,,

and specs

Front :

17" x 7.5 (+30 offset)  

Rear:

17" x 8.5 (+30 offset)

I'm in brisbane,,

Email me at : - afroguy@mailcity.com

Or phone: - 0401 453 756

  • 1 month later...

Hi everyone,,

I had to put the rims on hold for a while,,, but the are FOR SALE again,,,

$500 for the set,

I am in brisbane, so if anyone wants to come check it out,,, let me know,,

:rofl:

Afro

Phone:- 0401 453 756

i'm pretty sure the rear ones are fine,, only has stracthes and the edges are bent a little, which i think can be re-rolled out,,,

anyways,,, still for sale

Afro

Ph:- 0401 453 756

hey sydneykid, can u explain to me wat this means im abit of a noob

I am not trying to kill Afros sales. :fart:

"Cast" means the alloy is pored into a mold using gravity or a bit of pressure over a length of time. The rims can then sometimes be heat treated to make them stronger. It is a compromise between making them strong but not to brittle. Softer rims are easier to repair by maching or rolling, some can even be welded.

"Forged" means that very high pressure is used to sqeeze the alloy into shape, very rapidly. They are very hard and strong, slightly more brittle and not easy to re-roll or machine.

"Anodised" is an acid etching style of process where the alloy is dipped into a bath and the etch changes the colour of the surface. This is very durable surface and very light, there is no weight of paint. But they can't be easily re-coloured as they have to be totally dipped into the anodising solution.

"Painting" is well painting, the alloy is sprayed with paint (or powder coated) and generally baked in a oven. The paint is a couple of mm thick so it adds weight to the rim. But it is easy to repaint the whole rim or touch up damaged bits.

Hope that helps :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 15000? ish? Something like that anyway. It wasn;t so much a wear as a tear that then spread. Might have lasted a lot longer if not bothered by just one incident, whatever it was. I took a punt. They are really comfortable and do a good job of holding. My daughter HATED it when I first put them in, and probably still does now. She has sensory issues and hates the way they are all up your business. I'm 197cm and 95kg. Not fat or particularly wide, and the XL size seat is the rigth fit. If I was any fatter it would start to get too snug. Any skinnier and you'd possibly want the smaller width.
    • Mrs rs focus came factory with recaro cs  sportsters in it and they a pain in the ass to get in and out of with the really high bolsters, once you were in them they were one of the most comfortable seats I have ever sat in
    • The NA 2.5 has very little torque. You won't feel much. Those trannies are also a million years old now and it could well be f**ked. First generation electronically controlled autos will often refuse to kick down, ete, etc, depending on what's wrong with them.
    • Yes, but no but yes but no. Those "it's fine up to 500HP" rules and everything else like it were all determined back when the cars were 10 years old. As they are now 30 years old.....what do you reckon the chances of something shitting the bed are? I'd say they are much higher now than they used to be. You might be lucky. You might be unlucky. Spin the wheel and find out. Yeah, nah. It's actually exactly the opposite. Making boost early and having heaps of torque able to be generated right in the middle of the rev range will do more to damage an engine than having to rev it high to make the power. Think about the load on the conrods, bearings, etc, to make 400HP at 4000 rpm, vs 400 HP at 6500 rpm. So someone has already "let the Nissan out" which is how we describe the increased chance of a fiddled with engine to have had something done wrongly. Many more engines that have been opened die than stock ones do - even if you into consideration how they are treated wrt power levels and the like. Again, not saying that yours will definitely have been put back together by a moron. But the possibility does exist. It's still a lottery. Spin the wheel. What weakspots?
    • Sell it and buy a turbo version will make it a lot faster 
×
×
  • Create New...