Jump to content
SAU Community

Recommended Posts

So I've just bought a 2003 V35 Skyline, and had it shipped to WA from NSW by the dealer. I had it third party inspected, but never test drove it myself. The CD player does not work, and the CD I put in it is jammed, and makes a noise everytime I turn the ignition on. On top of that, I was told a band extender would be put on the radio, it was not. I am currently considering putting a tape in, just so I have something to listen to...yeah it's gotten to that point.

Looks like a band extender is $100-$200 and the CD jam will be $550-$650 according to these forums.

What can I reasonably expect to happen? Is the dealer obligated to cover the expenses I will incur fixing these things?

1st step is take it up with the inspector. It is their job to find these things out, and what you pay them for. The guy who inspected mine discovered the broken audio unit, so they replaced it. However my guy didn't realise the central locking didn't work and I never chased up anyone about it, so it still doesn't work (well, intermittently anyhow) 2 years later :(

Yes, every 2nd hand dealer has a statutory 3 month warranty on every vehicle they sell. If they don't want to play ball, tell them you have spoken with Consumer Affairs and they advised that the dealer fix it quick smart, otherwise they will be getting a letter from the ACCC.

My advice is if you can get the $600(ish) out of them install a Nissan double din kit and put a nice touch screen DVD player/radio in like I did similar to this : http://www.ebay.com.au/itm/260817904589?hlp=false

For a small amount of out of pocket coin you will have a good setup.

My advice is if you can get the $600(ish) out of them install a Nissan double din kit and put a nice touch screen DVD player/radio in like I did similar to this : http://www.ebay.com....04589?hlp=false

Disagree. The dealer is only obligated to 'make good'. In other words, if there is a CD player and the car is sold with all kit advised in working order then they are obliged to make it work - they can do this by installing a KMart special. And the guy who checked it out is just to ensure that no major issues exist and alert you to it so a decision is made with full knowledge *before* you commit. If they did not pick up this fundamental issue, then they may be worth pursuing but I suspect it's not worth your time - best spent on the dealer.

At the end of the day, it all comes down to how honest the dealer is. Some will go beyond their 3 month responsibility to maintain good customer reputation. That is what you need to work on. Mention that you have sought advice from this Australia-wide car forum as to dealer responsibilities, and that the consensus is that they must make good which is why you are pursuing this. Advise you are seeking OEM replacement. That may put the Fear of God into them and then you can negotiate a half-way with 2nd hand (but working) OEM - aim for kit from a Series 2 (it works better). If there is perception of lost business from others in the forum ( and word gets around), they may think twice in mucking you around.

But be careful to make it sound non-threatening (suck it in initially) - if they think they've already lost you they won't work so hard to keep you on-side.

Edited by Stuart McK
What can I reasonably expect to happen? Is the dealer obligated to cover the expenses I will incur fixing these things?

have you actually contacted the dealer to see what they say about it? chances are this was a waste of a thread and they will either fix it, or send you somewhere and pay the bill etc.

sorry to make this sound rude, but thats what will probably happen lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I swear at my GKTech ones every time I have to take them apart and replace a spherical. But I wouldn't swap them for anything else. They absolutely slay every other option, at least in terms of how they actually work. You sure you don't want to live with bearings? I mean, they don't have "ball bearings". They are rod ends and sphericals throughout. Tough as nuts, even though I have found more than one way to wear them out.
    • From when I was looking at getting the 86 engineered for the turbo, the joint said to put in a few euro 5 or 6 cats, then tune the car on a nice clean E85 tune When I was looking at a turbo for the MX5, it was basically the same thing, a couple of cats and a nice clean tune Although, it will depend on the year of the Jeep IRT emmisions standards required, and what mods are done, especially if it has a newer engine installed that requires a higher Euro
    • Yeah - but it's not actually that easy. There are limits for HC, CO, NOx and particulates. Particulates shouldn't be a concern in any petrol engine unless trying to comply to the very latest Euro standard. But getting a tune right so that all the others stay within limits AT THE SAME TIME is not a trivial exercise. You couldn't possibly get it right by just guessing at the tuner's dyno, unless he had a 4 gas analyser up the pipe, which is not often the case these days. It used to be. Every decent shop that did "tune ups" (as opposed to tuning) would have a 4 gas analsyer. Perhaps there's still quite a few of them around these days. But most "tuners" are only watching O2 and power readings.
    • Slight segway but the most expensive part of the whole thing which I would have thought would only be required for an engine size/type swap, not a VIV test, is emissions testing.  That's when you get into the big bucks.  I can't remember the exact price now but I got quotes for the GT-R based on swapping to RB30 (not that anyone bothers doing it legally anymore...) and it was around $4500 just for that alone.  The guy that does them manipulates the tune on the vehicle to make sure it passes.  The cheaper option is to book into Kangan Batman Tafe (I think that's where it was) and hire their tester.  Allegedly you're not allowed in there with the car though so not in a position to tweak anything to make sure the vehicle passes.  I'm sure in this day and age of ultra tuneable ECU's you could get the tuner to program a special efficiency (clean) tune that emits the lowest amount of particulates possible that would pass the test.  It might only make 50kW's but as long as it passed who cares!
    • I'm sure he has left signs, or, he is looking down, laughing That's my cunning plan for when I leave, lots of half finished projects, with no rhyme or reason of where I was actually up to, just to keep everyone on their toes
×
×
  • Create New...