Jump to content
SAU Community

Recommended Posts

INSURANCE + A CAR ALARM + KILL SWITCH(S) + STEERING WHEEL LOCKER+ AS MUCH SHIT TO SLOW THIEVES DOWN!

This year there has been close to 40 imports (mainly skylines) go missing in the brisbane to gold coast area (that have been reported on the forums!!) and most of them havent had any anti theft installed or insurance!. Of that about 2% have been returned unscathed, the rest have either turned up as smoldering wreck or in some scumbags shed stripped.

Want yours to be next? Dont do any thing to make sure your import is safe and you too can feel the frustration as some drug addict is stripping your 'girl' to pieces while you have no car for work and the police are too busy reloading their speed cameras to care.

At the rate theyre disappearing I thought someone should make a post, as its clear people dont know whats going on or have the "it wont happen to me" attitude.

Also if you have mates that dont frequent the forums and have an import tell them the above! Lets not give these losers any more money!!!!

Anyone else want to chime in and say something useful go for it.

Edited by Silvia GTR

+1 to this! I know guys that have started taking their steering wheels with them when they park the car somewhere a little dodgey.

3 point imobiliser, alarm and kill switches were the first things I did to the car when I got it. They went in the day after I picked the car up. When I ran a pub in Inala I parked the car in plain view, well lit area and it sat under a CCTV camera. The tech used to protect the car is part of it, being smart about how and where you leave it is just as, if not more important.

+1 to this! I know guys that have started taking their steering wheels with them when they park the car somewhere a little dodgey.

3 point imobiliser, alarm and kill switches were the first things I did to the car when I got it. They went in the day after I picked the car up. When I ran a pub in Inala I parked the car in plain view, well lit area and it sat under a CCTV camera. The tech used to protect the car is part of it, being smart about how and where you leave it is just as, if not more important.

I am in shock at the amount of people who have NO insurance because they cant afford it but have just bought a new set of wheels or rebuilt engine etc etc.

I got a quote from Just car and for my car for the bare minimum ( 3rd party, fire and theft) was a grand total of $288 per year!

People need to get there priorities straight and insure the bloody things. If you cant afford it then dont buy it.

I am in the process of upgrading all my security on my car to make me feel a little bit better, but then i dont park my car where i cant either see it or at least hear it.

The only way this influx of stolen cars will stop is when we make it harder to take them.

Also if you have a feeling parts are hot DONT BUY IT. That " too good to be true" deal often is and you are making sure these thieving scum keep at it.

/rant

Most of it is basic common sense..... Theres exceptional ciscumstances where poeples houses have been broken into and thats just shit, but i rekcon 90% of these thefts could have been avoided.

this is true.

so many people dont have insurance or adequate alarms.

also - as much as losing your car would be bad - im amazed at the amount of cars i see with gps - ipods, iphones - phones in general - laptops etc just sitting in cars in plain view (like in shopping centre car parks etc) its common sense but dont tempt anyone - having a thief in your car stealing your shit still leaves the proverbial 'sour' taste in your mouth, let alone someone stealing the car..

shame on these people domokun.gif

Ok so basic rundown list for anti theft should go...

  • Full comp insurance
  • 3 point immobiliser/alarm
  • Steering wheel club lock
  • GPS tracker

I'm pretty sure your insurance premium should be down aswell with a decent alarm/ immobiliser setup. Not sure about the other deterrents.

Budget method:

  • Killswitches
  • Remove ecu upon exiting
  • Remove steering wheel ditto

I reckon everyone should have a gps tracker though, if they decide to use a truck to 'pick up'

add this to budget methods

pasted from my stolen skylines thread.

"An old computer technician told me what he used to do in Melbourne to stop theft.

Only if your car is auto.

Using the wire that prevents you to start your car in reverse. set a key activated switch up to it in series to all other gears.

So you turn the key when you leave your car and take the key with you.

Obviously hide it in a good hiding place.

And yeah car won't start.

Nifty old trick."

sounds nifty.

When i jumped into a convo with chris and someone else last week, the general theme of it was "it might stop joyriders but if someone really wants your car it's gone, all you can do is make it more difficult for them"

When i jumped into a convo with chris and someone else last week, the general theme of it was "it might stop joyriders but if someone really wants your car it's gone, all you can do is make it more difficult for them"

Sadly I agree with this. Can only prepare for the worst by doing all you can to prevent and making sure your insurance is up to date and you're know what you're going to get out of it (agreed value) if the car does get stolen :(

Edited by GHOSTrun
  • 2 weeks later...

Also if you have a Pfc you can adjust your rev limit to 200, then remove the hand controller when you leave

Dude have you actually tried doing that? I takes forever - then you have to sit there getting it back up from 200 before you can drive. lol

Its a good idea in theory though.

I'm unhappy with the level of security that I've put in place on my car. So, I need to get a decent alarm still, and install a kill switch on it. I currently use a club lock when I park in questionable locations, and have full comp insurance.

I was thinking, do you think we could organise a group buy and installation for the SAU forums? The theft is rampant at the moment, and maybe providing some incentive to members is in order? I don't mind organising something like this, but I need suggestions on what shops to approach. If we get 10-20 cars, to be put in over a period of a few weeks, with money up front or something, I'm sure someone would be willing to do us a good deal.

Another think you can do is remove your fuel pump fuse from your footwell before you vacate your vehicle.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The easiest option might be to just spray a bunch of fish oil in there.  At least that way you can feel like you've done something while you continue to ignore it
    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
×
×
  • Create New...