Jump to content
SAU Community

Nissan Skyline R32 Antenna

playboi14

By playboi14,
in Car Audio & Electrical

 Share

Recommended Posts

playboi14 Collaborator

playboi14

Posted
Posted

Hey guys,

Just wanted to know if someone could tell me where exactly is the antenna in an R32 GTST skyline?

There is no generic metal unit like there are in most cars (ones that retract up and down), so I have to assume it is part of the front or rear glass panels?

Would anyone be able to tell me?

The reason I ask is I have a regular CD player in my car, and the radio reception is very strange, some stations are perfect for hours on end, and then some reason sound like static for hours, it also doesn't matter what station, it happens on all of them randomly.

Could it be a dodgy CD player? Old antenna? or a broken or damaged connection along the way to the deck?

Any information would be greatly appreciated guys!

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/374157-nissan-skyline-r32-antenna/
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

rear glass. if you are having reception issues make sure the antenna amplifier is turned on. there is a blk/red wire in the radio harness that needs +12v on it.

quick way of checking this - switch to AM radio. if you have stations then you have other problems.

playboi14 Collaborator

playboi14

Posted
  • Author
Posted

Hey Guys,

Thanks for the Information.

The front and back windows have never been changed (that I am aware of),

And my front windscreen does have a thin black line right down the middle and around.

Is the antenna in the front or back window? little confused.

I will eventually pull out the deck to make sure everything is plugged in.

Hopefully, its nothing too serious

Regards

mii11x Community Regular

mii11x

Posted
Posted

hi playboi14,

yes mate the r32 gtst has the antenna in the front windscreen, the line you are looking at in yours is the antenna..........try rewiring the coaxial antenna plug to fix the dodgy reception.

hope this helps

mick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 power steering

      By GTSBoy · Posted

      49719 is the cooler loop. Right at the front, LHS of that diagram. Return line from rack (LP side) goes to cooler loop on RHS front of car, then back under engine and returns to bottom of tank. 49717M is feed from tank to pump. HP line out of pump is thick rubber, followed by the hard line that runs down to crossmember and runs in parallel (but opposite flow direction) to the LP return line. Nothing goes anywhere near the firewall or interior of car. The closest they get to that is the connections on the rack.
    • drifter17a
      R34 power steering

      By drifter17a · Posted

      Thanks, plan is to drain all fluid tomorrow and do smoke test to find out the leak.   Appreciate your help and want to understand how the system work. So cooling is achieved by the long loop not any rad? The diagram seems to suggest it connects to somewhere inside the cabin and I thought that is a cooler inside firewall. If you look at the diagram it seems to show it connects to something inside firewall. I tried chasing it but not easy unless I take loads off   i am confident pump is good as fluid goes in and it gets soft( steering) but as soon as I turn engine off , loads of bubble come to surface and overflow. When engine is on , fluid level is below minimum but when off it shoots off and thinking it is sucking air in. I suspect aluminium pipe may have a crack line or whole   smoke test with no fluid should be a good start and if needed will remove the pump   In addition, the one going under the engine bay is high pressure line and one directly connecting from pump to resorvoir is return/ low pressure?   finally I searched and suggestion is to use dexron 2 but that is discontinued so bought dexron 3 as all research suggest it is compatible and shouldn’t cause any issues/ blow seals. I bought two liter of dexron 3 motul atf
    • GTSBoy
      RB25 S2 Idles but doesn't want to rev

      By GTSBoy · Posted

      Don't worry about. Just don't try to drive hard enough to make boost and you'll be fine.
    • GTSBoy
      R34 power steering

      By GTSBoy · Posted

      Yes. This has already been said. It is a loop of hardline in front of the radiator. Because.... the pump is on the LHS and the steering rack hydraulic connections are where they always are on a RHD steering rack....on the RHS. The high pressure line goes down under the engine, along the crossmember, like it does on all Skylines. Don't just throw expensive braided hoses/other kits at it. Work out what is wrong and fix that.
    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      Still got the afm on the intake, clamps are shut tight, only loose hose is the one that goes from the j pipe towards the IACV, since it's next to impossible to find a factory hose and the barbs are different sizes (I'm still using clamps on this hose to try and help it seal on the iacv side) I've ordered parts to make up the hotside of the intercooler pipes, I'll plumb it in and see what happens in a few days I suppose The turbo's internally gated, can I just unscrew the tension rod to let the gate open?
×
×
  • Create New...