Jump to content
SAU Community

Rear Licence Plate Mount For 370Gt

Alkatraz
 Share

Recommended Posts

Alkatraz Rising Star

Alkatraz

Posted
Posted

Hey guys,

Can anyone enlighten me on how to mount a standard size WA plate on the rear of my 370GT? Dimensions of the WA plates are 372mm x 134mm.

I'm asking because I want to get some custom plates but to fit the standard plates when I got the car, (which are the same size) I had to bend in about 1 cm on each end of the plate to fit it. I would rather not have to bend the new custom plates and if I get the Acrylic ones it will probably be a nightmare to do. Actually now that I think about it, I need to get the acrylic ones so that I can get 9 letters on it.

Cheers

Al

Link to comment
https://www.sau.com.au/forums/topic/374523-rear-licence-plate-mount-for-370gt/
Share on other sites
Yo-Yo Grand Master

Yo-Yo

Posted
Posted

some food for thought for you I guess...

I've got the really long euro style nsw plates

I used to work in a car yard & pinched a spare plastic mounting bracket from the workshop they usually just chuck out

I cut off the edges until it fit in the rego plate recess & it acts as a second mounting plate so the plate sits flush against the rear bumper.

A set of cylindrical spacers will do the same trick, just not as neatly :thumbsup:

photo4.jpg

P2230008.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • sonicii
      Mechanic in Victoria

      By sonicii · Posted

      I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • GTSBoy
      R32 GTR clutch master cylinder adapters

      By GTSBoy · Posted

      Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...