Jump to content
SAU Community

Recommended Posts

hey guys new to this forum my names Mikey and i drive a R33 GTST, i have noticed something with my climate controll i can press the auto it will be at 18 degree's but it will be really hot, but then some times it might actually come out cold, its rare that it comes out cold, has anyone had a issue like this?? pls inform me with any suggestions pls

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/374695-r33-climate-controll-wont-go-cold/
Share on other sites

hey guys new to this forum my names Mikey and i drive a R33 GTST, i have noticed something with my climate controll i can press the auto it will be at 18 degree's but it will be really hot, but then some times it might actually come out cold, its rare that it comes out cold, has anyone had a issue like this?? pls inform me with any suggestions pls

Thanks in advance!

This should help.

I had a simelar problem with mine a while back, the diagnostics showed it to be the PBR, which is the black box located on the right underside of the dash (left side of the divers foot-well)

It has touched sounthing it shouldnt have, and the force of the conductivity bent the tabs upwards so it wasnt working properly.

Im sure that probably doesnt make any sense but if you have the same problem then you will see what im talking about when you pull it apart

Climate Control DiagnosticsR32 and R33

The climate control has a diagnostic mode.

Enter the diagnostic mode by pressing the OFF button for five seconds withinten seconds of turning the ignition on.

Sensor check

Sensor check is selected by pressing HOT switch (the red triangle) while indiagnostic mode. The microcomputer detects whether each sensor input signal iswithin correct parameters. The results are displayed on the screen.

If normal, a "20" is displayed.

If abnormal the failed sensor number is displayed. The sensor numbers are asfollows:

20 - all is normal

21 - outside air sensor

22 - Inside air sensor

23 - Water temperature sensor

24 - Intake temperature sensor

25 - Sunload sensor (small sensor on the left hand side of the dashboard near thewindscreen)

26 - PBR

27 - Refrigerant temperature sensor

This should tell you if any of your sensors are faulty.

Mode door position check

(This is probably not the cause of your problems but it is a nifty self checkto play with). While in Sensor check, depress the HOT button again. This willoperate the the mode door actuator, and checks the whether the positiondetection switch is operating. Again the results are displayed on the display.

If normal, a "30" is displayed.

If abnormal the number of the faulty mode is displayed as follows:

30: Normal

31: VENT

32: B/L (Bi level)

34: FOOT

35: DEFROST/FOOT

36: DEFROST

Actuator operation check

By pressing the HOT button while in Mode Door Position check, you can actuallysend a signal to check the operation of the actuator manually. This is a bitcomplex, and will be expanded upon when a manual can viewed.

Sensor recognition check

Press the HOT switch again and a "5" will be indicated in the displaysection. If you press the "AMB" button (R32) or the windscreendefroster button (R33) in this status, the display will show the temperaturesensed by each sensor. This will give you an indication also of which (if any)are faulty.

Temperatures will be displayed in the following order (R32):

5 -> Outside air temp -> Inside air temp -> Suction temp ->Refrigerant temp

R33 seems to have a different selection, with three temperatures beingdisplayed.

Obviously if any of these temps seem excessively different from actualtemperatures you have a problem!

Calibration

If you depress the fan switch during the Sensor Recognition check, you will goto Calibration in which you can set the difference between the indicatedtemperature and sensed temperature.

While in Calibration press the HOT or COLD buttons to change the display byplus or minus 3 degrees in .5 degree increments (R32) or 1 degree increments(R33).

  • 1 month later...

Problem Solved! I didn't so much check the lights as take out my AC control unit in the centre console and then unplugged it blew and rubbed some dirt off and tried to "clean" the ports etc. Stuck them back in and now it works. So not to sure exactly what happened but I fixed it :P

It was my step before Hit it and see if it works

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
    • These look like S13 wheels.  And Welcome! 
×
×
  • Create New...