Jump to content
SAU Community

Best Way To Clean Up Oil Leak

BigDirtyJase
 Share

Recommended Posts

BigDirtyJase Experienced

BigDirtyJase

Posted
Posted (edited)

Hey all,

Well over the weekend I did an oil change on my car. I put some oil flush in and run the car for about 15 minutes and then drained the oil from the sump (black as hell)...after about 20 minutes to let it drain completely put the bolt back in the sump and went to take off the oil filter from the relocator.

When I took off the filter, oil spilled out of the filter and down the LHS (when you standing in front of the engine)...causing oil to spill on to the floor. So I cleaned the oil on the floor and tried to clean up around the LHS of the engine as much as I can. Once I did that, put the new filter on and poured in my new oil (GW Syn-X 3000). Now after I checked everything and went for a drive to the shops. The next morning I can see a pool of oil that's leaked onto the concrete...I touched and it looks like the old oil is dripping from underneath the car somewhere...I cleaned up most of it with a rag over night and checked this morning and there is no drips but when I drove to my client this afternoon, I decided to have a look when I went out for a ciggy and saw oil drops on the road...

what's the best way to clean all that up...I'm assuming that I might have to jack the car up and attack it with some degreaser or something else from underneath the car (I have big hands and arms to attack from the top)

It's slowing driving me mad with oil dropping (I'm only hoping it's old oil, if it's new, fresh oil...then I'm screwed because I don't know where it's exactly coming from)

Thanks In Advance!!

Edited by BigDirtyJase
Link to comment
https://www.sau.com.au/forums/topic/374972-best-way-to-clean-up-oil-leak/
Share on other sites
zei20l Grand Master

zei20l

Posted
Posted

if its black old looking oil, dont stress. if its honey coloured, then worry where its coming from

hit it with some degreaser, same with the concrete floor.

just keep it away from any electricals and the fan belts.

BigDirtyJase Experienced

BigDirtyJase

Posted
  • Author
Posted

Well I degreased the car around the relocator kit and now I know I have an oil leak :-( ...looks like it's coming from one or both of the braided lines from the relocator (where the oil filter screws on to). I have been checking my oil and it's all ok for now

Now my guess is I need to replace the hose or hoses (this is going to be fun)....does anyone know the size of the hoses....I might just get regular hoses for the time being.

260tech Proficient

260tech

Posted
Posted

Well I degreased the car around the relocator kit and now I know I have an oil leak :-( ...looks like it's coming from one or both of the braided lines from the relocator (where the oil filter screws on to). I have been checking my oil and it's all ok for now

Now my guess is I need to replace the hose or hoses (this is going to be fun)....does anyone know the size of the hoses....I might just get regular hoses for the time being.

Hey Jason, just in case you haven't pinned down your oil leak yet...........your oil relocator fittings be tapered, nip 'em up. And before you go changing hoses I would check to see that I did not have prob with filter/seal changeout. Sometimes old oil seal can stick in place, not noticed. Double "O" rings (new over old) leak like a sieve, as does damaged/malformed/nicked/misaligned new seal.

Just a thought.

Cheers GW

BigDirtyJase Experienced

BigDirtyJase

Posted
  • Author
Posted

Hey Jason, just in case you haven't pinned down your oil leak yet...........your oil relocator fittings be tapered, nip 'em up. And before you go changing hoses I would check to see that I did not have prob with filter/seal changeout. Sometimes old oil seal can stick in place, not noticed. Double "O" rings (new over old) leak like a sieve, as does damaged/malformed/nicked/misaligned new seal.

Just a thought.

Cheers GW

I checked the around the filter...it's no leaking from there...it's definitely coming from the hoses (I'm going to hate taking them off...because one side has the crap Earl's clamp fittings, it's going to take some time to get them off...and blood will be drawn and lots of swearing

RS4-S Proficient

RS4-S

Posted
Posted

personally i think degreaser cans are a waste of money, buy a can or 2 of brake cleaner and give the area around the oil filter and where you spilt a hit and also on top of the diff (if its an RS4) maybe dont do this in your driveway though

  • 2 weeks later...
BigDirtyJase Experienced

BigDirtyJase

Posted
  • Author
Posted (edited)

They both do the job but brake cleaner is a little bit more effective....I just happened to have like 4 and half cans of degreaser in the shed...might as well use them (there is alot of oil stains on the driveway from multiple cars with oil/power steering leaks over the years)...

anyways...Where is the best place in Melbourne where I can get either braided lines and either the crappy Earls clamp type ends or proper AN -10 fittings (would that mean I have to change the fittings on the relo kit)...or where can I get good rubber hose from?

Rubber hose whilst cheaper...will keep me going for now (waiting to get paid from work...god I hate montly pay sometimes) but want to go with proper braided lines and fittings down the line

Edited by BigDirtyJase
RS4-S Proficient

RS4-S

Posted
Posted

stuff knows whats in it but its alcohol based and breaks down grease and grime like nothing else and evapourates. most degreasers are soapy/slimey crap in a can that leave a residue. its so cheap cos its mainly water and people see 'degreaser' and think thats what im looking for

i dont think we have a can of degreaser in our whole workshop, apart from the 44 we have full of orange scented degreaser with cut down and use as floor cleaner

  • 2 weeks later...
BigDirtyJase Experienced

BigDirtyJase

Posted
  • Author
Posted

UPDATE,

I took my car to my friends shop today to check out this oil leak because it's gotten progressively worse...checked the lines and found that they were actually OK. Found that it was leaking from the oil temp sensor hole (it had an adapter so I could fit the sensor)

So I cleaned it up and resealed it, only to find it leaking again, tried another fitting and still leaking. Ended up having to take off the entire relocation kit and put the oil filter back on the block.

I need to clean up the re-locator kit and need to see it why it was leaking. My mate thinks that the fitting hole on the filter block is cracked but can't tell without cleaning out the old oil.

I wonder where I could get another filter block (if my one is cracked and can't be repaired) from or I might end up going with just a sandwich plate

Once I clean it up, I'll post some pics of the filter block

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • weikleenget
      R32 GTR clutch master cylinder adapters

      By weikleenget · Posted

      I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • sonicii
      Mechanic in Victoria

      By sonicii · Posted

      I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...