Holset Hx45 Pro Series Turbo With Garrett T4 Rear Housing

[MrMopa]

ITEM:

HOLSET HX45 Pro Series Turbo with Garrett T4 rear housing

CONDITION:

Brand Spanking New

PRICE AND PRICE CONDITIONS:

$2000 plus postage and handling (please inquire about postage if necessary), pickup from the Northern Suburbs of Melbourne is possible as is delivery to Melbourne metro areas at a small cost.

EXTRA INFO:

Holset HX45 Pro Series Turbocharger with Garrett T4 Rear housing.

HX50 Compressor wheel 66/100mm

HX40 Turbine wheel 64/76mm

HX50 Compressor housing.

Water cooled HX50 Bearing housing.

Garrett T4 Split turbine housing, A/R 1.00

Set up to make 700+hp on RB25 / RB26 / RB30 / 1JZ / 2JZ or similar power with faster response on an XR6 Turbo / FPV F6

This turbo will safely make 3 bar (43+Psi).

4 inch V-Band clamp with turbo outlet and adapter included in sale.

Full gasket set also included.

LOCATION:

Melbourne, Australia

CONTACT INFO:

Private Message here on the site

email: [email protected]

Phone: Aaron 0413 537 843

PICTURES:

http://i33.photobuck...10HX50FRONT.jpg

http://i33.photobuck...15GASKETSET.jpg

http://i33.photobuck...4514V-BAND3.jpg

http://i33.photobuck...4513V-BAND2.jpg

http://i33.photobuck...4512V-BAND1.jpg

http://i33.photobuck...NEPARETSBOX.jpg

http://i33.photobuck...59HX50FRONT.jpg

http://i33.photobuck...ETTT4FLANGE.jpg

http://i33.photobuck...457HX40CORE.jpg

http://i33.photobuck...456HX40CORE.jpg

http://i33.photobuck...455HX40CORE.jpg

http://i33.photobuck...GARRETTREAR.jpg

http://i33.photobuck...GARRETTREAR.jpg

http://i33.photobuck...ETTT04ZREAR.jpg

http://i33.photobuck...51HX50FRONT.jpg

[MrMopa]

bump it on up

[MrMopa]

bumpy bump.

[MrMopa]

bump it on up

[MrMopa]

bump it on up please.

[MrMopa]

bump please.

[MrMopa]

Bump to the top, NEW PRICE NOW $1500

[MrMopa]

Back to the top.

[Andy B]

Hi there. Who assembled the turbo? Interesting combo of parts. What RPM do you envisage it spooling up at on an RB26? Cheers, Andy