Jump to content
SAU Community

Recommended Posts

Hi guys

I have for sale my R32 GTR which I had planned to do a full ground up build on. But pulling the pin on it due to other stuff going on in my life.

I am the only owner since its been in Australia, I imported it a few years back it is complianced and was registered but rego since has ran out. While in Australia I probably only drove it on the actual road for less than 10,000 km. The car was Grade 4 vehicle, with no accident history. When it arrived we only found a a small rust spot on the lower right hand rear panel which we fixed up. All running gear is still in the car, the motor has been pulled out and the interior expect for dash and console assembly has been removed. There is no backseats, roll cage was planned to go in. The underneath and body is all straight.

The body has been sanded back, but still requires further sanding and prep'ing for spray painting.

I want to sell everything as a complete package.

What's included -

Complete R32 GTR rolling shell

RB26DETT motor its done around 130,000 km

- Trust fuel rail

- Sard 700cc Injectors

- Nismo N1 steel wheel turbos

- Exhaust manifolds are slightly ported

- Mines dump pipes

- Cam cover gaskets and all turbo gaskets have been replaced

- NISMO twin plate clutch/NISMO fly wheel

ECU - NISTUNE chipped, safely tuned to 232 rwkw.

ARC front mount intercooler painted black

APEXI twin pod filters

Twin exhaust system

7 point roll cage

TEIN coilover shocks with EDFC damper controller

CUSCO front strut brace

CUSCO adjustable castor arms

Nardi Steering wheel

NISMO 320 kmph instrument cluster (31727 km)

NISMO center console gauges

APEXI boost gauge

RECARO fixed bucket seat (Passenger seat standard)

Top Secret aero kit

Aftermarket fibreglass bonnet

Standard R33 skyline wheels

Asking price $11,500

Great start for someone looking to build a track car or a really unique street car.

Contact 0403596801

post-14134-0-95544700-1314098579_thumb.jpgpost-14134-0-30025000-1314098594_thumb.jpgpost-14134-0-90721400-1314098609_thumb.jpgpost-14134-0-68895600-1314098626_thumb.jpgpost-14134-0-80959700-1314098640_thumb.jpgpost-14134-0-40684100-1314098654_thumb.jpgpost-14134-0-14826200-1314098667_thumb.jpgpost-14134-0-52253500-1314098684_thumb.jpgpost-14134-0-32658900-1314098971_thumb.jpgpost-14134-0-99852200-1314098981_thumb.jpgpost-14134-0-73591100-1314099013_thumb.jpg

Edited by Shakiel
Link to comment
https://www.sau.com.au/forums/topic/375028-1994-r32-gtr-abandoned-project/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

PARTING EVERYTHING OUT

HERE IS A LIST OF WHAT IS UP FOR GRABS, PM FOR ANYTHING YOU ARE INTERESTED IN

Roll Cage

Turbo back twin exhaust

RB26 Motor (Mines dump pipes, NISMO n1's, TRUST fuel rail, Sard 700cc injectors, NISMO clutch and flywheel)

TOMEI fuel pump

Standard GTR fuel pump

NISTUNE ECU and GTR LOOM

ARC Intercooler

APEXI twin pod filter with AFM's

Gearbox/transfer case

NARDI steering wheel

NISMO instrument cluster plus NISMO center console gauges

APEXI boost gauge

Aero kit - Front bar, side skirts, rear bar

Aftermarket bonnet

R33 Skyline wheels

Front and rear brake calipers

RECARO fixed bucket seat

GTR passenger seat

Headlights

Rear tail lights

NISMO rear lower control arms, rear camber arms, upper arms

HKS piping kit minus HKS pod filters

1994 R32 GTR Shell no accidents. Perfect to drop everything straight into.

Anyone after pics of an item, let me know I'll get it arranged and sent to you.

Quicker responses if you contact me on 0403596801.

Thanks.

Roll Cage - $1,000

Turbo back twin exhaust - $800

RB26 Motor (Mines dump pipes, NISMO n1's, TRUST fuel rail, Sard 700cc injectors, NISMO clutch and flywheel) *DUMP PIPES, INJECTORS, FUEL RAIL UNDER NEGOTIATION* $2,500 with out mentioned parts in negotiation

TOMEI fuel pump - SOLD pending payment

Standard GTR fuel pump - $100

NISTUNE ECU and GTR LOOM - $800

ARC Intercooler - $800 *UNDER NEGOTIATION*

APEXI twin pod filter with AFM's - $300/$150 without AFMS

Gearbox/transfer case - $1000

NARDI steering wheel - $200

NISMO instrument cluster plus NISMO center console gauges - $350

APEXI boost gauge - $100

Aero kit - Front bar, side skirts, rear bar - *FRONT BAR IN NEGOTIATION* side skirts, rear bar $250

Aftermarket bonnet - *NEGOTIATION*

Front and rear brake calipers - $400

RECARO fixed bucket seat - $750

GTR passenger seat - $250

Headlights - $250

Rear tail lights - $150

NISMO rear lower control arms, rear camber arms, upper arms - $250

1994 R32 GTR Shell no accidents, complied etc. Perfect to drop everything straight into - $4500

hi, just wondering what the internal diameter of the twin exhaust was?

also, shipping cost to sydney, 2756?

thanks.

2.5 inch and no idea. I'll find out and let you know mate!

THanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
    • @KinkstaahKrinkle paint the "silver" alloy, not the red filter frame Engine bay heat won't be a issue worth worrying about as the silver alloy blocks it off on 3 sides, as for the top, the bonnet seals most of it and the big OEM CAI intake snorkel is still fitted in its original position  I will head into Clark's Rubber when I have some time to grab some pinch weld to tidy up the alloy after I paint it As for performance, I honestly wasn't expecting any, the only reason I got it is because the intake noise sounds cool to my old ears when I'm feeding it the beans Sometimes it's the silly things you do in in life that gives the most fun, and I do love anything that makes cool car noises In other news: I survived 4 nights at sea with Jackie not throwing me over board, holidays are continuing now as we are currently chilling at the Beachcomber in Toukley, after taking the coast roads from Sydney in the MX5, top down all the way, Toukley is where I spent a good deal of my youth holidaying during the summer months, there's lots of reminiscing going on,  and lots of beaches and old houses to visit Next on the list is to head to Batemans Bay for a few days, but we will take the Commodore out to stretch its legs, then Commodore hasn't really moved for months
    • There’s probably people who’d like to do it and then when it comes to putting their hands in their pockets they’ll all disappear into the shadows 
×
×
  • Create New...