Jump to content
SAU Community

Recommended Posts

Hi all i have a heap of C210 coupe parts up for sale. Got to clean out my shed so that i can fit my car back in there. I have heaps of parts Including doors boot lids interior bits, glass, grilles heaps of chrome bits. I don't have any bonnets or any straight bumpers. I think it will be easier if you just let me know what you need and i will see if i have got it.

Contact me by email at [email protected] or reply to this thread and i will get back to you.

Cheers Jim

Link to comment
https://www.sau.com.au/forums/topic/375114-fs-c210-coupe-parts-for-sale/
Share on other sites

Hi all i have a heap of C210 coupe parts up for sale. Got to clean out my shed so that i can fit my car back in there. I have heaps of parts Including doors boot lids interior bits, glass, grilles heaps of chrome bits. I don't have any bonnets or any straight bumpers. I think it will be easier if you just let me know what you need and i will see if i have got it.

Contact me by email at [email protected] or reply to this thread and i will get back to you.

Cheers Jim

PM sent..

Cheers

This stuff is so small it's almost embarrassing to ask but... I need the plastic plugs (one each side) that blank off hole that gives access to the bolt in the bottom of the front quarter panels. Also I need the rubber surrounds for the little button inside the door jam that turn the interior light on and off when you open the doors. If you are in Vic I'd make a visit and pick out more stuff too.

Rubber grommet between the radiator support and coil (passenger side) that goes from engine bay into the guard.

Also the little clip that holds the bonnet stand onto the radiator support.

The sun visor clips on the ceiling that clips the sun visors up.

Centre console?

plastic clip that holds the two steel spring/rods together that lifts the boot. its right in the middle, white thing.

how bad is the front bumper?

cigarette lighter if it still has the rubber bit on it so it's not loose in the hole.

the passenger side cover underneath the dash, covers the fan blower.

I'm sure there's more will go and look at the car tomorrow.

This stuff is so small it's almost embarrassing to ask but... I need the plastic plugs (one each side) that blank off hole that gives access to the bolt in the bottom of the front quarter panels. Also I need the rubber surrounds for the little button inside the door jam that turn the interior light on and off when you open the doors. If you are in Vic I'd make a visit and pick out more stuff too.

Hi Drew,

i have the rubber button for you mate, come down when you have time..also the mr30 blank cluster plugs wii do the job for your holes

on your guards, you need to ""play with them"" but you will get the same results 90%

cheers

Rubber grommet between the radiator support and coil (passenger side) that goes from engine bay into the guard.

Also the little clip that holds the bonnet stand onto the radiator support.

The sun visor clips on the ceiling that clips the sun visors up.

Centre console?

plastic clip that holds the two steel spring/rods together that lifts the boot. its right in the middle, white thing.

how bad is the front bumper?

cigarette lighter if it still has the rubber bit on it so it's not loose in the hole.

the passenger side cover underneath the dash, covers the fan blower.

I'm sure there's more will go and look at the car tomorrow.

Hi socrates,

i have one sun visor clip, also a clip that holds the bonnet stand, not original use poly urathane to hold in place

it will do the job, also i have a spare cigarette lighter, and the passenger side cover, its for the air con model

but will do the job and its in good condition brown..give me call if you need other things i might have them..

Hey guys sorry i haven't had time to get back to you. I will have a look in the shed over the weekend and get back to you asap.

Passin ewe i haven't received any email from you so send through another email or pm me.

Also it is not a complete car that i have, just a shed full of parts.

Hi LUVC210, I used your email link in your initial post, Anyway I've resent the message I had in sent items, If that hasn't worked, I'm after side main windows if they're not scratched. What colour are interior bits?

Regards Ricky

  • 4 months later...

Hi mate, would you happen to have the fuel filler complete unit. many thanks

Hi all i have a heap of C210 coupe parts up for sale. Got to clean out my shed so that i can fit my car back in there. I have heaps of parts Including doors boot lids interior bits, glass, grilles heaps of chrome bits. I don't have any bonnets or any straight bumpers. I think it will be easier if you just let me know what you need and i will see if i have got it.

Contact me by email at [email protected] or reply to this thread and i will get back to you.

Cheers Jim

Hi mate, looking for a complete fuel filler unit for a C210, let me know if you have one and are willing to part with it.

thanks again

Hi all i have a heap of C210 coupe parts up for sale. Got to clean out my shed so that i can fit my car back in there. I have heaps of parts Including doors boot lids interior bits, glass, grilles heaps of chrome bits. I don't have any bonnets or any straight bumpers. I think it will be easier if you just let me know what you need and i will see if i have got it.

Contact me by email at [email protected] or reply to this thread and i will get back to you.

Cheers Jim

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's the thing. Cam is smaller than before.. though the old cam was +6 degrees advanced. We're talking huge changes here, the narrowbands want to trim out 20% of fuel and pull the (wideband) idle to like 16.0 AFR or such. One side is a little more trimmy than the other. Think along the lines of ~20% to ~15-18%. Unfortunately my scouring of the internet hasn't really found anyone with this issue. People either just disable NB's or have them wildly different, where one is -20% and the other is +20 or 0 (i.e a sensor is just dead/wiring is just busted). Turning them off and relying on the base map only results in the wideband reporting at about 14.0 with the Varex closed. It'd be a little leaner (closer to 14.7ish) with the Varex open. I know I can just change the switch points so that the narrowbands agree with the wideband, but it's still odd. Both of them are reading voltage, it's just that they're reading quite high mv, in the ~800 region. It's just odd. This was with the IAT fudged to report it was about ~22 degrees which is my guesstimation of the temperature in the room. I have an OEM sensor ready to try tonight, which is slow and crap - but .. worked last time I used it. Sadly I am aware that idle tuning with the big TB is going to be a PITA and I look 'forward' to many hours spent stalling or stumbling idle or delving into drivability things.
    • The GTR strut brace clears the new manifold.. by about 0.5mm. So this means I need to buy an OEM GTT Strut brace (again), which will clear the new manifold, but not the bonnet vents. I guess I can sell the GTR Strut brace with the bonnet with the vents as a package deal as someone will need this one day. So my choices are vented bonnet but no strut brace, or GTR Bonnet with OEM brace (which I have to buy) but is bright red instead of the same colour as the rest of the car, which means the entire front end of the car will just be red until it goes back to paint jail. In other news the engine starts and doesn't leak. Why both O2 narrowband sensors think the tune is rich AF I do not know. The idle is also pretty shitty and my expensive IAT sensor from the USA is dead. The car sounds awful. But I assume or at least hope this is due to the many exhaust leaks, and the concrete garage it is in, sitting there with 0 intake bolted to it, and no bonnet or panels or anything to stop the induction/intake sound which is about 200db.
    • C'mon! At least come kicking and screaming into the 2000s. BA XR8 bulge.
    • No such thing as E30 in Sydney servos As stated above, flex fuel is your only viable,  and "safe" option I believe
×
×
  • Create New...