Noob Question About Boost Controller

[MIIK3Y]

Hey guys I just fitted my self a turbosmart boost controller and I'm stuck when it comes to fitting the boost gauge propley, currently it's on the line that goes to the boost controller that comes out of the intake, the most the gauge reads is about 7 but the factory gauge it doesn't even reach +7, where should the boost gauge hose be placed, can someone take a picture of the hose you fit to or how you have fitted it pls

Thanks in advance guys

Edited August 24, 2011 by MIIK3Y

[MIIK3Y]

Anybody???

[Bronx]

i connected mine between the manifold and purge valve.

it goes as follows: Manifold-tube-Black circle-tube-Purge valve, i connected it between the manifold and black circle thing.

also if its a factory boost gauge, and it says +7 and its x100mm/hg that equates to 13.8psi

(the purge valve is the yellow circled item. thanks to some old thread i found this picture)

Picture

[mad082]

yeah as said, the stock gauge doesn't read in PSI, so don't expect your aftermarket gauge to read 7psi when the stock gauge is reading 7