Garrett Gtx3071R

[wolverine]

The 1st and 3rd pics are of the turbine exducer. You need to remove the turbine housing to measure the turbine inducer.

[Mick_o]

ill do that tomorrow

[JonnoHR31]

yer remove the housing and measure the widest point. if your gonna swap it you need to pull it off anyway

[wolverine]

The cartridge number should give it away anyway. I really don't think anyone has modified the turbine wheel from that CHRA.

Either way, call MTQ (Adam??) and talk to them.

[ARTZ]

just put the f**king thing on ya car already man........................

[Mick_o]

its going on next Saturday!

just put the f**king thing on ya car already man........................

[ARTZ]

Good stuff....

the internets he says shes says can drive you crazy...I went to the extent of buying a new turbo for mine cause for the last 4 months I havent been able to drive it.. So I sit here reading stuff to kill time and on paper full boost @ 3600 and 235kw, its not so crash hot..

Got it up and running today drove it around a bit, give it a few clutch kicks and i was having a ball, so much so i couldnt care less about the new turbo atm I just wanna drive..

just bolt it up get it tuned and I bet you will love it..then 1 of 2 things will happen

1.. you will realize it wasnt worth all the headache and expense and give up on it..

2..you will freaking love it, the bug will bite and you will start a list to mod more shit..

[discopotato03]

Busy training with air for other purposes today .

A std BB type GT30 turbine measures around 59.9 by 54.9mm inducer and exducer .

The cropped ones from memory are 56.4 by 51.6mm (84 TRIM) OR 56.4 by 53.6mm (90 trim) .

Your calls , my preference is for Garrett or HKS GT30 "T3" flanged GT30 turbine housings . The HKS GT Pro S ones need a bit more work to make the dump pipe and if you particularly wanted one of their different A/R ratios its probably worth it .

I'm not sure what size because there isn't a lot of feedback with these GTX compressor wheels .

A .

[ARTZ]

none of the GTX are cropped though disco....

[GTScotT]

I went to the extent of buying a new turbo for mine cause for the last 4 months I havent been able to drive it.. So I sit here reading stuff to kill time and on paper full boost @ 3600 and 235kw, its not so crash hot..

Heyyyyy?

To clarify, you gibberish speaking bag lady, your talking about your existing setup? Not a 20g result. Yes?

[ARTZ]

Heyyyyy?

To clarify, you gibberish speaking bag lady, your talking about your existing setup? Not a 20g result. Yes?

haha..thought that might stir ya...

thats my exsisting setup yes...its lame on paper but its still great fun to drive..

[Mick_o]

just took the rear housing off and the exducer is 60mm

[wolverine]

[Mick_o]

">

[Mick_o]

doesnt actually look 60mm in the pic lol

but it is!

[JonnoHR31]

you can use any of the garrett gt30 housings then

[discopotato03]

none of the GTX are cropped though disco....

Thats what I thought too , I just put the numbers up to cover the GT30 family of turbines .

A .

[Mick_o]

Ok ok u guys have talked me into getting the .82 garrett housing lol!!!! ive spoken to MTQ today and they are gunna let me exchange my sonic housing for the garrett unit tomorrow arvo and they have a dump pipe as well so its gunna cost me another $500 to swap housings and get a new dump pipe.......

So will the little 14psi actuator that i have pictured in here be up to the task or is that somethin else ill need to look into?????

[Mick_o]

Just found a guy in here with a neo with the gtx3071R making 293rwkw on 98! Hmmmmm wonder how mine will go with E85??? Cant wait till this weekend to find out!

[Harey]

Just found a guy in here with a neo with the gtx3071R making 293rwkw on 98! Hmmmmm wonder how mine will go with E85??? Cant wait till this weekend to find out!

What response and what boost?