Garrett Gtx3071R

[DVS JEZ]

Pulled my pcv valve out today cleaned it up it works fine but the rubber grommet on the other hand was stuffed when i pulled it out it broke in half Nissan want $50 for a new 1!

Getting a new rubber tomorrow but used a rubber hose that i had and dodged it up and it didnt seem to play up as much so fingers crossed its sweet when i put the new rubber in

Im getting frustrated cant get my tune done till next thursday now

A tune from Yavuz will be worth the wait

[T04GTR]

its abit more then an idle valve and retarded timing to actually get it to work..

and audi quattro "umluft"

[Mick_o]

Haha i know dude what he done with my car already was tops

im hoping there is a bit more to be had down low once he has finished tweaking the tune up

A tune from Yavuz will be worth the wait

[Mick_o]

Ok so im getting my cars tune finished off at 6 tonight so i will have some results to post up tonight

WISH ME LUCK GUYS!

[Lithium]

Sweet! Good luck

[wolverine]

Good luck Mick

Not on the dyno yet but next I on the rollers I hear.

Edited November 2, 2011 by wolverine

[GTScotT]

Ohhhh Miiiiiccckkkkkk??? lol

[wolverine]

It's off the rollers. Mick just sms'ed me the headline result but I will leave it for him to share.

Hopefully he will post up the dyno later tonite when he gets in, I am keen to see how it all looks.

[Mick_o]

Ok so i just got home was a big nite thanks to the unigroup boys for staying back to finish my car it is UNREAL

Thanks for ya patience guys FINALLY the piece of paper you have all been waiting for!!!!!!!!

[Mick_o]

">

[DVS JEZ]

Thats awesome bud. Hows it feel?

[Mick_o]

Now go to town and pull that graph to pieces and tell me what you guys think?! HAHA

[Mick_o]

Feels nice dude im stoked! To be honest i only gave it a lil squirt cos the boys in blue were about i think cos its drag nite at the creek.

You will find out soon enough mate when i bring it up your way

Thats awesome bud. Hows it feel?

[Lithium]

Nice work - glad that went smoothly, nice stout amount of power... definitely not a normal GT3071R

Tbh without any prompting I'd have thought it was a GT3076R dyno plot, but dyno plot doesn't tell the whole story - after you've had some time to get acquianted it'll be interesting to see how you find it. Out of interest, with that 11blade wheel does the GTX3071R have the same kind of anti-surge whistle craziness the GT3076Rs do?

[BOZ22N]

Do they all need that amount of boost to get that power? I have a T3 hi mount ex gate and I got 260 kw @ 13 psi.

It might be a low mount thing? But non the less good result it will boogy nice work

[badhairdave]

Nice work - glad that went smoothly, nice stout amount of power... definitely not a normal GT3071R

*cough* I near sprayed my computer with coffee, my gt3071 sr20 curve is nearly identical, even peak power. I won't post it as i don't want to take away from micks results as that is awesome for a .63 IW on a stock manifold. No boost control issues either which is a relief.

Out of interest, what boost controller do you run mick as i would have thought it would hit full boost a lot sooner (under 3k) based on my old rb25 results.

[Lithium]

Sorry, perhaps I should have qualified that with internally gated, ra ra ra GT3071R?

I had in my head the typical basic GT3071Rs tend to be between 250-270kw range with full boost around 3500rpm, I've never seen anything to hint they'd be anywhere near getting full boost under 3000rpm! Unless you are running 6psi....

[GTScotT]

*cough* I near sprayed my computer with coffee, my gt3071 sr20 curve is nearly identical, even peak power. I won't post it as i don't want to take away from micks results as that is awesome for a .63 IW on a stock manifold. No boost control issues either which is a relief.

Out of interest, what boost controller do you run mick as i would have thought it would hit full boost a lot sooner (under 3k) based on my old rb25 results.

Sorry mate Mick runs a .82

[scotty nm35]

Nice result Mick.

[badhairdave]

Sorry mate Mick runs a .82

Ah, that explains it.

original talk was of a .63IW, i must have missed where it was changed