Looking For Better Turbos And Ecu... Any Ideas That Are Proven?

[perthzilla]

as the title says. im looking for tubos and an ecu that is going to help gain reasonable power without much more lag than standard. i have heard about the garrett gt27/60r. but am curious of any info from people with them and or ideas of similar sized turbos that are as good or better for a modest budget. and the same for ecu's.

[levinboy]

If its for A GTR go hks GTSS or the garret equivalents 2860-9s and a power fc cant go wrong, you will prob need supporting mods too ie fuel pump,injectors and new air flow meters

I have the above turbos and ecu

And try searching on here works a treat and check the RB26 dyno thread plenty of ideas in there

oh and welcome to the forums

[PewPew]

I find the 2530's in my R34 a good middle point between power and response. They'll run very close to their efficiency levels on stock internals without any dramas.

[perthzilla]

cheers guys. everyone i talk to says different. although 28 60 r seems to be mentioned a bit. allstar said full boost at 4400 where full boost stock is 4000. and thanks for the welcome... need to hang out with more skylines. i have a few mates with gtsts and gtrs now. the more the merrier ha ha

[Count Grantleyish]

Only cos I'm bored now.

Have a good read at these threads and decide what you want from your GTR.

http://www.skylinesaustralia.com/forums/topic/93880-rb26-turbo-upgrade-all-dyno-results/

http://www.skylinesaustralia.com/forums/topic/236467-definitive-guide-to-building-300-330awkw-gt-r/

http://www.skylinesaustralia.com/forums/topic/310181-gt2860r-7s-9s-5s/page__st__20__p__5115057__hl__-7s+vs+-9s+vs+-5s__fromsearch__1#entry5115057

And there is couple more threads but can't find, do a search on Forced Induction forums.

[levinboy]

-9s on my car full boost before 4000RPM