Series 2 Rs Four S Rear Wheel Bearing

[Cowboy1600]

So, I had planned to spend today replacing the rear wheel bearings on the Stag.

I cannot get the rear hub off as I don't have a deep enough socket. I will go for a ride now and grab one and want to try and get the wheel bearings at the same time but I don't know which ones to get.

No worries, I though, I'll get the info from SAU. Search function not working

So a new thread it is.

Can anyone give me, definitively, the part number for a rear wheel bearing for a Series 2 RS Four S (factory manual)?

I've read they are the same as an R33 GTR. If so, are you 100% and do you know the part number? If not, can anyone help?

Thanks in advance!

EDIT: DOH! Search working now....

Edited August 27, 2011 by Cowboy1600

[RubyRS4]

Now that you've started this thread, you wanna post up a link to the thread you found your answer too.

[Cowboy1600]

Now that you've started this thread, you wanna post up a link to the thread you found your answer too.

Search isn't working. Google does, and it took me to an SAU thread talking about it. No answer in that thread, however. http://www.skylinesaustralia.com/forums/topic/311492-stagea-wheel-bearing/

There was promise of an answer, but nothing forthcoming.

So the question still stands. Anyone know the part number?

[pintaline]

so this is old but i need a rear bearing. has this been confirmed as same as GTR?

[Cowboy1600]

I didn't get the part number from the guy who installed it for me. I know it was about $300 just for the bearing though. It was genuine Nissan so call them and they should be able to tell you. Note I believe auto and manual bearings are different.

[Jezboosted]

I bought new rear bearings about a year ago for muy rsfour-s. gave von bibra nissan my chassis/vin number and they sourced the right parts

R32/R33/R34 GTR compatible

rear right = 43280-AA300

rear left = 43281-AA300

http://justjap.com/store/product.php?productid=19658

the only difference between left and right is the locating dowel is moved from one side to the other

hope this helps

[nisrob]

U can buy assembly from nissan ive heard. Can press out original bearing went to bearing place cost $80 trade for it. Press it back in. Need to cut old bearing off with grinder to split the centre part of bearing off.