Jump to content
SAU Community

R32 Gtr Front Uprights/dog Legs To Suit 280Mm Wide 18X11" Rim

OLLIE_NZ

By OLLIE_NZ,
in Motorsport Discussion & Builds

 Share

Recommended Posts

OLLIE_NZ Enthusiast

OLLIE_NZ

Posted
Posted

Hi guys,

As per the title I'm trying to get around the rubbing issue of running a 265mm - 280mm wide slick with the stock Nissan R32 GTR front uprights/dog legs/goosenecks (whatever you want to call them :) )

We're moving up to an 18x10.5" and or 18x11" Enkei RPF1 or TE37 SL rim and want to run either a Dunlop or Michelin slick to suit.

Are there any companies out there that make these to accommodate a wider rim?

I've done a bit of searching so apologies if this has been covered elsewhere.

Ollie.

bri73y Proficient

bri73y

Posted
Posted

Hi guys,

As per the title I'm trying to get around the rubbing issue of running a 265mm - 280mm wide slick with the stock Nissan R32 GTR front uprights/dog legs/goosenecks (whatever you want to call them :) )

We're moving up to an 18x10.5" and or 18x11" Enkei RPF1 or TE37 SL rim and want to run either a Dunlop or Michelin slick to suit.

Are there any companies out there that make these to accommodate a wider rim?

I've done a bit of searching so apologies if this has been covered elsewhere.

Ollie.

Hi Ollie,

I've recently ran a 285/30/18 on a 18x10+20 with no issues whatsoever. The offset is the key I think.

My car is not overly low though so it's no real issue with the guards rubbing as it may be with a very low car.

JB

Russman Grand Master

Russman

Posted
Posted

I have a GTSt so not sure if uprights are the same...

I'm running 265/35/18 RE55 and AO50 tyres and they are quite close with a 18x10.5 +15 TE37 SL. With that tyre size I've had to run a 10mm spacer to clear.

Reading Johns post above maybe they are different?

No aftermarket item available that I'm aware of. If there was I would be very interested. I even looked into modifying the standard ones but was advised not to by an engineer due to the steel make up that would be used in automotive parts. In the end I decided a well machined 10mm slip on and longer wheel studs was the easiest and safest solution.

  • 7 months later...
bigmikespec Veteran

bigmikespec

Posted
Posted

Ok thread revival time.

Along the lines of the theme above... I want to fit some wider than normal wheels and tyres to my R33 GTR. The idea was to use 315/30/18 or 335/30/18 tyres if at all possible which would need a 12" wide rim.

Question is... has anyone tried to fit or ran with a 18 x 12 rim on their R33 GTR front and/or rear??? And with what offset or guard modifications.

Ideally I would like to have the same all around, but can step down to 11.5" on the front.

  • 2 weeks later...
bigmikespec Veteran

bigmikespec

Posted
Posted

Well there is a guy that I have been in contact with who has run 305's with 18x11 rims, 315 would be good as I am pretty sure that is what the Porsches use a lot which gives a lot of different tyre choices.

I think 18x11.5 with 0 offset would fit and clear the suspension but would require +40-50mm wider guards with 315's.

9krpm Mentor

9krpm

Posted
Posted

bigmikespec, could you give more details? I am in the same boat. Will be running 18x11 and prefer to have an upright to accommodate this rather than using a spacer. Any chance of a group buy? :yes:

bigmikespec Veteran

bigmikespec

Posted
Posted

Dan, if you have a spare upright I can copy the design and make some drawings so someone can fabricate one. If you have one from a R32 or R33 that would be good.

  • 8 months later...
Risking Grand Master

Risking

Posted
Posted

Strut front end conversion won't help with what they are wanting to acheive.

Everyone wants to run a wider front tire 11inch + but physically can't because the upright fouls on the rim/tire and the guards just won't stretch that far nor would you want to increase the track by that much

I tried modified uprights but they just weren't strong enough and gave all sorts of weird leverage ratios that messed up the the spring rates etc.

The problem is they need to travel so far inboard to clear big rims it creates a ( type shape that can't be gusseted against compression well enough.

Now converting cars to a proper wishbone front suspension and able to run any rim you want as the arms fit inside the wheel.

Using available supercar parts from the likes of racer industries and 888 means replacement parts should they break are always available.

A custom upright is always going to be a hassle to replicate as well.

Risking Grand Master

Risking

Posted
Posted

I also doubt that car in the photo ended up with a strut front end.

I'd say he was using that shaft to locate the upright while he fabricated the lower arms.

The geometry of the lower arms on the car doesn't look like it was designed for a mac strut setup.

  • 7 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Milkmun
      NC MX5

      By Milkmun · Posted

      Definitely needs a hard top
    • Murray_Calavera
      Wiring high beams in IC7 for R32 GTR

      By Murray_Calavera · Posted

      Nah, shouldn't have made any difference. Reds on, or car running, should be same same for what you were doing. 
    • niZmO_Man
      R32 GTS (RB20DE) clogged cat

      By niZmO_Man · Posted

      Should be able to source 200 cell R32 cat... unsure how easy it would be to get it to Malta though.
    • PLYNX
      R32 GTS (RB20DE) clogged cat

      By PLYNX · Posted

      Oh bugger ! Your right ! Good old hydrogen sulfide. Takes me back to the good old school days ! 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
×
×
  • Create New...