Jump to content
SAU Community

R32 Offers   

48 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Hey guys,

Unfortunately the GDZLLA has come across an accident. The car is not listed on REV's and has no money owing on it. Front end hit.

Following details:

1994 Nissan Skyline R32 GTR

Engine:

All work performed by JEM Motorsports - 303kw

RB26DETT

N1 Turbos

JJR Coil pacls

Aftermarket Oil pump

Aftermarket Water pump

Aftermarket fuel pump

700 cc Injectors

Thermostat, Thermostat Gasket, Camshaft Seals, Crankshaft Seal and Timing belt all removed and replaced

Aftermarket exhaust

Other

R34 GTR Brembo Brakes installed by JEM Motorsports

Tein Coilovers with Dampener Control

DBA Slotted Rotors installed in the Front

Aftermarket clutch

Boost controller

DS2500 pads with under 2,000 km's usage

Power FC with Tune

Whiteline Sway Bars front and back

Misc

GTR seats with rails in good condition

triple gauge cluster [centre]

Custom NSW Number plates [GDZLLA] < Make an offer via PM or SMS

HKS Oil Cooler [not on the car] - make an offer

Currently accepting offers for the GTR as is, pay and tow.

Make offers above $7000 for the whole car, offers can be made via SMS or PM or Email or via Posts on thread

This vehicle has not been listed on eBay or any other forums at this point.

Work done to the engine and the custom R34 GTR Brakes itself pay for themselves, everything is a bonus. Need it gone asap.

Contact details:

Vik - 0466605513

[email protected]

Jamil - 0426899929

SMS during business hours or call after business hours. All pictures available on this thread, if anything in specific is required please request.

Inspection of the car is available, will only be available if an offer is made and cash is brought.

No tyre kickers.

Again, the car is to be sold as is at the moment, no intentions to separate the parts at this point in time due to labour and time restrictions.

Note to Mods: an auction is not being held on thread only offers are being received, if post is in the wrong section please feel free to move the thread

Thank you for your time, and hope to hear from you all soon.

post-46821-0-08125700-1314666317_thumb.jpg

post-46821-0-25247100-1314666354_thumb.jpg

post-46821-0-13707500-1314666375_thumb.jpg

post-46821-0-24851700-1314666522_thumb.jpg

post-46821-0-84299300-1314666548_thumb.jpg

post-46821-0-34894800-1314666566_thumb.jpg

post-46821-0-15277700-1314666589_thumb.jpg

post-46821-0-36238900-1314666604_thumb.jpg

post-46821-0-68627600-1314666687_thumb.jpg

post-46821-0-74588600-1314666704_thumb.jpg

post-46821-0-99575500-1314666722_thumb.jpg

post-46821-0-19707700-1314666743_thumb.jpg

post-46821-0-60892600-1314666760_thumb.jpg

post-46821-0-96963100-1314666782_thumb.jpg

post-46821-0-62596100-1314666802_thumb.jpg

post-46821-0-78528500-1314666821_thumb.jpg

post-46821-0-89125800-1314666837_thumb.jpg

post-46821-0-66070400-1314666855_thumb.jpg

post-46821-0-33961600-1314666874_thumb.jpg

Sorry to hear and see the damage :(

Sub $6000 at a guess toway price, unfortuantely.

Likely part out to get the most out cash of it.

I Wouldn't mind a price on the Oil cooler.

Cheers guys.

Earls Oil Cooler With Relocation Kit and Thermostat

$450

If we're not happy with the offers made then we will have to separate the parts. We'll keep you guys updated when that does happen.

Not at the moment as they are going with the car if sold. Currently negotiating with one candidate.

If sale falls through car will still be sold as is.

If that doesnt bring an outcome, then it will be stripped

Only parts available for sale separate from the car is the oil cooler

Also added is a pair of stock side skirts $150

And a pair of rear pods $200

Both white

picks of rear pods?

Unfortunately the rear pods that i had posted up about before are moulded to the curves of the side skirt so they must all sell together.

It would be a waste for someone to buy just the pods and try putting them on, and they dont fit.

$250 for both.

Pics to come.

  • 2 weeks later...

Power FC did survive ..

Also the car is still up for grabs. If anyone has any reasonable offer please SMS me asap. I really do not want to go around ripping the whole thing apart.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2025 Update PRP RB30 Black and Crank Shipped from Austrailia made it and was sent off to the machine shop. -700 to 800hp Service was done to the Block, which included: Inspection Prep and Black Brace to convert engine to 4wd oil Pan  Crank Fully prepped for 1000hp PRP RB30 timing belt kit w/ ALL options Nitto Pistons Nitto I-Beam Rods Nitto Oil Pump New OEM Nissan RB26 Cylinder Head Shipped Supertech intake and exhaust Valves over-sized Kelford 272 cams Mild Lift Nitto Headgasket All of the machine work is completed and next step is assembly and dropping in the new motor.   Upgrades (Changes) from the previous build: Engine Management - no longer using ECUMasters. Haltech Platinum Pro Turbo - Went from twin HKS 2530s with upgraded wheels to BW362SX-E Fuel - 1000cc injectors to ID1430x Single in tank Walbro 450 to Radium External Surge Tank w/ 2x Walbro 450s     I am looking to be back on the road by the end of summer. Wish me luck! monthly updates should be coming!    
    • Realised I never posted this , also I never got a price 
    • I'm glad to hear you've joined the SKI club. Spend the Kids Inheritance.
    • I have a VALCON if anyone wants it, I have no idea why you'd want to have VVT specifically broken out of the ECU as opposed to running it off the FCON/whatever standalone you have.
    • Hi Yes we're a bit optimistic we might get something out of sealing up the two pipes of the external wastegate and reactivating the stock one. I believe the orginal stock wastegate was tack welded shut. It doesn't budge and visually looks closed and sealed. The car has noticeably more lag so it could be at least part of the problem, maybe all. It's definately one of the key changes made since last tune. And it's one that's more difficult to fully understand and measure, not like for instance timing or cylinder compression.  Thanks for that feedback, we'll let you know how this progresses. Fingers crossed.   Regards Rob
×
×
  • Create New...