Jump to content
SAU Community

Recommended Posts

Item:

- R34 GTT HSD HR Coilovers - $800

No Leaks

No knocks

<10,000km since new

- R200 R34 Turbo Manual LSD Diff - $200

Good condition

Spins two

- R34 Coupe Sunroof - $800

Comes in roof section

Includes all wiring and sunroof switches

- R34 Coupe Doors Complete - $150 Each

Glass

Window motor

Central locking

Wiring loom

Hinges

- R34 Coupe Rear Quater Windows - $150 Each

Glass

Rubbers

In steel panel (cut with plasma)

- R34 Coupe GTT Manual Complete Interior - $Offers

Front Seats (airbags intact)

Rear Seat

Carpet

Front Door Trims

Rear Trims

Parcel Shelf

Roof Lining

Manual Centre Console

Dash (no cracks, airbags intact)

- R34 Front/Rear Control Arms - $60ea or $100/pair

Ball joint and bush in good condition

Comes with nut and split pin

- R34 Castor Rod - $30ea or $50/pair

Bush in good condition

Comes with nuts

- R34 GTT Swaybars (front and rear) - $100ea

Good upgrade for Non turbo S-chassis/R-chassis

- R34 GTT Rear Arms - $30ea or $100/set of 6

Toe, camber, traction

- Front knuckles - $100/pr

Good condition

- Front Reo - $50

Not bent

Cut for FMIC

- Front Fiberglass Widebody Guards - $100/pr

Passenger side mint

Drivers side previous fiberglass repair, refer pic

- R34 GTT Coupe 3" Dump Pipe & Full Exhaust - $300

Mild steel

De-cat

Comes with straight pipe and muffler rear sections (unbolts)

- R34 Carbon Fiber Bonnet BLITS ADR Approved - $50

Shit condition

Perfect for rough track car

- Bonnet Hinges - $50/pair

Good condition

AC Condenser - $50

Excellent condition

Comes with all pipe work

R34 Power Steering Rack - $250

Complete with tie rods and tie rod ends

Rubber boots in good condition

Location:Melbourne, Cheap Freight AUSWIDE with www.e-go.com.au

Item Condition: Was was in good condition inside and out

Reason for Selling: Stripping out entire 34 Coupe

Price and Payment Conditions: Cash

Extra Info: Have plenty more parts available, ask and you shall receive

Pictures:Available

Contact Details:PM

PARTS SOLD:

- Engine/loom/ecu

- Gearbox/clutch/crossmember/tailshaft/etc

- Bare rear cradle

- FMIC

- Alloy Rad

- Complete brakes (disks/calipers/lines)

  • 3 weeks later...
  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...
  • 2 weeks later...

Item:

- R34 GTT HSD HR Coilovers - $800

No Leaks

No knocks

<10,000km since new

- R200 R34 Turbo Manual LSD Diff - $200

Do you still have the bottom plastic diffuser ???

Good condition

Spins two

- R34 Coupe Sunroof - $800

Comes in roof section

Includes all wiring and sunroof switches

- R34 Coupe Doors Complete - $150 Each

Glass

Window motor

Central locking

Wiring loom

Hinges

- R34 Coupe Rear Quater Windows - $150 Each

Glass

Rubbers

In steel panel (cut with plasma)

- R34 Coupe GTT Manual Complete Interior - $Offers

Front Seats (airbags intact)

Rear Seat

Carpet

Front Door Trims

Rear Trims

Parcel Shelf

Roof Lining

Manual Centre Console

Dash (no cracks, airbags intact)

- R34 Front/Rear Control Arms - $60ea or $100/pair

Ball joint and bush in good condition

Comes with nut and split pin

- R34 Castor Rod - $30ea or $50/pair

Bush in good condition

Comes with nuts

- R34 GTT Swaybars (front and rear) - $100ea

Good upgrade for Non turbo S-chassis/R-chassis

- R34 GTT Rear Arms - $30ea or $100/set of 6

Toe, camber, traction

- Front knuckles - $100/pr

Good condition

- Front Reo - $50

Not bent

Cut for FMIC

- Front Fiberglass Widebody Guards - $100/pr

Passenger side mint

Drivers side previous fiberglass repair, refer pic

- R34 GTT Coupe 3" Dump Pipe & Full Exhaust - $300

Mild steel

De-cat

Comes with straight pipe and muffler rear sections (unbolts)

- R34 Carbon Fiber Bonnet BLITS ADR Approved - $50

Shit condition

Perfect for rough track car

- Bonnet Hinges - $50/pair

Good condition

AC Condenser - $50

Excellent condition

Comes with all pipe work

R34 Power Steering Rack - $250

Complete with tie rods and tie rod ends

Rubber boots in good condition

Location:Melbourne, Cheap Freight AUSWIDE with www.e-go.com.au

Item Condition: Was was in good condition inside and out

Reason for Selling: Stripping out entire 34 Coupe

Price and Payment Conditions: Cash

Extra Info: Have plenty more parts available, ask and you shall receive

Pictures:Available

Contact Details:PM

PARTS SOLD:

- Engine/loom/ecu

- Gearbox/clutch/crossmember/tailshaft/etc

- Bare rear cradle

- FMIC

- Alloy Rad

- Complete brakes (disks/calipers/lines)

is the car complianced and is it a stat write off

and how much for bare shell plus whatever is left over yuou can't sell. prefer to get with sun roof as this would be a c*nt to get

in melb

  • 2 weeks later...

Do you have the little white plastic lid off the fuel tank? The one with the hoses and fuel pump wires going through it? If so please PM me a price. I am OS at the moment so it might be a little while before I reply.

Ta

Justin

did you have fiberglass front fenders still ?photos ?

floor mats ?

drivers side a pillar trim without broken pins or holes?

little triangles near a pillars on doors to hide screws on mirrors ?

drivers side seat belt if its not frayed

both sides seat belt , push button click in parts on the seat frames ?

door panels ? front and rear sides ? with trims/plastic handles. and the trim around switches ?

window switches ?

the little trim around the sunroof switch on the roof in front ?

rubber between the mirror and the windscreen to stop vibrations ?

drivers side reverese lens if its in good nick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...