Is this turbo system complete?

[PURE]

I have been interested in turbo's but I've never really known much about them.. I took a look at some sites around the net and it seems my list below is what an entire turbo system would be composed of. Can you guys add anything more?

Note: In general terms. This is not a skyline application.

Turbocharger

Intercooler

Intercooler Piping

Exhaust Manifold

Fuel / Timing Controller

Fuel Injectors

Wastegate Assembly

Blow Off Valve Assembly

Downpipe

Intake

All necessary Hardware, Hoses, and Fittings

[Revhead]

You sorta have it covered with the 'All necessary Hardware, Hoses, and Fittings' bit

I'd add a decent fuel pump, upgraded air flow meter, and possibly things like cams, headwork, crank/rods/pistons, oil coolers etc depending on how suited the engine is to turbocharging in stock form and what you want to do with it. And don't forget a boost guage

[strutto]

If it's a NA motor your turbocharging and your planning on running serious boost, I'd consider a thicker head gasket to lower compression and / or some forged pistons as well...

You also have ommited any form of boost control...

[666DAN]

Oh and a mechanic that is very patient when fitting the oil and water lines for the turbo

[Revhead]

Oh yeah, a boost controller would be good

I like to steer away from thick head gaskets to lower compression, I much prefer to do it with a combination of headwork and crank, rods and pistons. There's nothing wrong with a properly designed metal head gasket, I just prefer the other way

[strutto]

and / or some forged pistons as well...

Hence the and / or...

To cater for everyone...

[Revhead]

Oh hehe missed that - too subtle for me

[666DAN]

THe other option is don't run spastic boost

[Revhead]

Since when is that an option?? j/k