Stalling Problem

[krzysiu]

Disconnect the battery, then pump the brakes. turn on the lights. Play around with the electrics untill all the power is gone. Leave the car for around 20min. Then connect it all up.

[sigsputnik]

my r32 was doing something similar, revs jumping about. i cleaned the airflow meter with brake cleaner and that problem has gone.

about the stalling, i spoke to my mechanic, and he said it could be a dirty idle rev screw. doesn't necessarily need tightening (to up the revs), it just needs a good clean.

may help?

[spraggs]

cheers lads, will try, thanks

[TracidTrax]

But it never use to do that?

and i ahvnt touched the BOV in ages .. it ****in sucks because every time i try and do a 3 point turn it stalls and people laugh at me..

How can i fix it without removing the bov

lmao

i had the same problem as you guys so my mechanic upped the idle rev and have never had a problem again not sure where you change it but took my mechanic 30 seconds to do.

u can adjust it on throttle body