Jump to content
SAU Community

Recommended Posts

Hi everyone,

I recently bought a turbosmart bov, so yesterday getting ready to install it I removed the stock bov plumb back pipes and blocked the holes in the remaining piping, so that my stock bov would vent to atmosphere. The car now almost stalls when it idles blows lots of smoke and backfires when trying to drive.

If I floor it, the car takes off fine and the only way to make it idle is continually rev it.

When i checked under the bonnet I noticed if i put my hand over the bov hole the car idles properly..

Any help would be awesome, is it just the stock bov trying to vent to atmosphere thats causing this and will it fix itself when I install the turbosmart bov?

Thanks

Edited by tomgtr
Link to comment
https://www.sau.com.au/forums/topic/376649-running-like-crap-unless-i-flog-it/
Share on other sites

Hi everyone,

I recently bought a turbosmart bov, so yesterday getting ready to install it I removed the stock bov plumb back pipes and blocked the holes in the remaining piping, so that my stock bov would vent to atmosphere. The car now almost stalls when it idles blows lots of smoke and backfires when trying to drive.

If I floor it, the car takes off fine and the only way to make it idle is continually rev it.

When i checked under the bonnet I noticed if i put my hand over the bov hole the car idles properly..

Any help would be awesome, is it just the stock bov trying to vent to atmosphere thats causing this and will it fix itself when I install the turbosmart bov?

Thanks

Yes, your new BOV is causing all the problems, as it creates an air leak out of the system that the AFM and stock ECU can't account for..... Get rid of it.

I've actually got a copy and paste space where this is. Read on.

I love these threads.

You love the noise - and put the BOV on the car to be a wanker. Its scientifically proven that if you're a wanker, the first thing you do when you buy a Skyline is install a vent to atmosphere blow off valve, to advertise the fact that you are indeed, a wanker.

Do you even know how the Nissan air intake system works? There is an AFM that measures the air entering the engine. The Stock BOV recirculates FOR A REASON. When your duck whistle, twisty whooshy twirly, dick pulling, sparkly, spinny, shiny, noisy, fuleh sic, wank off valve opens, it dumps air that the engine has measured and allocated fuel for. When only half the fuel gets into the cylinder because the air it measured is at the street corner where you sped up erratically and backed off because you saw some women on the corner, thinking that when they heard your BOV they'd get naked and run and dive into your car, the engine is now overfueled and under oxygenated, and stalls, backfires, and carries on. You know why? Because you've created a MASSIVE AIRLEAK on a system that will not run with airleaks.

Do you like that fact that you will foul your plugs constantly?

Do you also like attracting the cops attention?

Do you like the risk of being defected and having to pay money for a BOV that didn't need to be there?

Do you like the fact that you are just making skylines more hated? (And don't worry, its almost a guarantee that you'll drive through the main street of town making it release "because you like the wank off sound")

Do you like it how women love the sound, get naked and dive into your car as you drive past?

Do you think SAU will be happy about another "My car is running rough, I only installed a duck whistle, twisty whooshy twirly, dick pulling, sparkly fuleh sic wank off valve" thread

They should create a database script that bans people that install BOVs "just for the sound" or complain when their car runs rough...

I'm was running 300rwkw and had the stock BOV.

Good luck with it though.

Edited by The Mafia

When only half the fuel gets into the cylinder because the air it measured is at the street corner where you sped up erratically and backed off because you saw some women on the corner, thinking that when they heard your BOV they'd get naked and run and dive into your car,

Is this not how one gets women?

When only half the fuel gets into the cylinder because the air it measured is at the street corner where you sped up erratically and backed off because you saw some women on the corner, thinking that when they heard your BOV they'd get naked and run and dive into your car...

c'mon everyone knows BOV's don't get women naked, screw the bov go block it off and run a metal intake pipe and go tu tu tu... doseing gets chics naked lol :woot:

The simple answer is, the BOVs re circulate air on low throttle and idle areas (they are open).

The ECU is tuned to run well while this is taking place.

Block the recirc pipe and the car will run like ass because the system has a big airleak.

It runs fine when you boost it because the boost pushes the BOVs closed and you have a sealed system again.

Hook it all back up or get proper aftermarket choof choof BOVs so you can get teh ladies.

lol I bet this guy wasn't expecting to be owned so hard for a seemingly harmless thread...

what is wrong with stock BOV sound? they sound fkn amazing on my gtr, I reckon the next upgrades u should get are:

22inch chromies - with spinners

a Queen Street paint job - candy apple pink or toxic green

and maybe lower the car about 10 inches so its undrivable.

That should get u all the attention u need :)

Ahaha 22 inch chrome spinners!

That will actually fix the stalling problem too. the reflection from the chrome diffuses the air escaping and causes the ECU to reroute the encryptions and adjust the stall converter.

I thought it was because the spinners counteract the effects of gravity, thus preventing the car from stalling.

Seriously though, atmo bov's are gay and not necessary. On my 32GTSt I've just gone to a full 32R cooler setup with the twin bov's and recirc pipe, welded a 2" return for the bov's to my stainless intake pipe and running a stainless mesh pod.. It's actually quite noisy!

lol I bet this guy wasn't expecting to be owned so hard for a seemingly harmless thread...

If the OP searched he would know that any BOV thread ends up degrading to something like this.

Unless the OP made a search and thought fark it....Mafia has been a bit quiet lately. :devil:

Believe it or not, but since SAU started more than 7 years ago, this topic has been discussed before.

Please use the search function in future. it may be found here:

http://www.skylinesaustralia.com/forums/index.php?app=core&module=search&search_in=forums

While we understand that it can be frustrating to have your thread closed - Please consider that other members may feel it to be disrespectful and selfish of you to post a simple question, without using the search feature to review the wealth of information provided by said members over the years.

If you still feel that this action is unjust, then please PM me and we can discuss it further.

(Lol wonder if I'll get hammered for posting this)

no.jpg

Edited by The Mafia

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...