Jump to content
SAU Community

Recommended Posts

I have the following parts off my GTR R34 for sale parts are in perfect condition they have been advertised before however due to time wasters without money ( if you fit this description dont ring me you will be told very politely G.F.Y)

Original Alloy bonnet Bayside blue perfect condition $900

Original front bar Bayside blue $600

Genuine HKS purple fuel rail $200

Brembo Rear calipers and rotors of V spec Left/Right 322 mm rotors,brake lines with project mu pads and original pads. ( will fit any GTR ) $1100

Original cams of RB26 GTR R34 $300

Original harmonic balancer from GTR R34 $150

V spec front lower diffuser for GTR R34 slight grazing on the underside but still in good condition. $250

If you want the parts shipping will be at your expense, you can contact me on my mobile 0412 950192 I don't get on here a lot so don't PM me if you want a immediate reply.

Thanks Dave

I forgot to add I also have a set of Xenon headlights for the GTR R34 as well perfect condition. $1100 the pair.

Looks like the front bar is sold pending payment.

All parts are in Cairns.

Regards Dave

  • 3 weeks later...

Here is a quick update on what has been sold and what is still left in the shed.

GTR R34 Xenon headlights the pair...$1100

Original Alloy bonnet Bayside blue perfect condition $900 Sold

Original front bar Bayside blue $600 Sold

Genuine HKS purple fuel rail $200

Brembo Rear calipers and rotors of V spec Left/Right 322 mm rotors,brake lines with project mu pads and original pads. ( will fit any GTR ) $1100

Original cams of RB26 GTR R34...... $300

Original harmonic balancer from GTR R34..... $150

V spec front lower diffuser for GTR R34 slight grazing on the underside but still in good condition....... $250 Sold

If you want the parts shipping will be at your expense, you can contact me on my mobile 0412 950192 I don't get on here a lot so don't PM me if you want a immediate reply.

Thanks Dave

  • 2 weeks later...
  • 2 weeks later...

Here is a quick update on what has been sold and what is still left in the shed.

GTR R34 Xenon headlights the pair...$1100

Original Alloy bonnet Bayside blue perfect condition $900 Sold

Original front bar Bayside blue $600 Sold

Genuine HKS purple fuel rail $200

Brembo Rear calipers and rotors of V spec Left/Right 322 mm rotors,brake lines with project mu pads and original pads. ( will fit any GTR ) $1100

Original cams of RB26 GTR R34...... $300

Original harmonic balancer from GTR R34..... $150

V spec front lower diffuser for GTR R34 slight grazing on the underside but still in good condition....... $250 Sold

If you want the parts shipping will be at your expense, you can contact me on my mobile 0412 950192 I don't get on here a lot so don't PM me if you want a immediate reply.

Thanks Dave

These parts above are still for sale due to people not having the money... The parts listed as sold are gone..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
    • Silly question, as I bet you've checked already, but the motor turns over by hand yes? I suspect Neil has a spare starter, though if not, I believe I have a spare R33 (or two) starter.
×
×
  • Create New...