Jump to content
SAU Community

Recommended Posts

Hey guys,

Have a bit of an interesting one....

The oil from my gearbox keeps spewing out from the breather line which ends up near the top of the bellhousing. Bought the car with fresh shockprook oil put in and thought it must have been overfilled so i wiped away the excess, checked the oil level (just below the filler hole) and didnt take too much notice of it since. Now (2 weeks later since being wiped away) i had a look underneath the car and it's still spewing out. I've checked the oil level and its about 10mm below the filler hole, so its not overfilled.

Is there a small breather, like on a diff, on the gearbox that might be blocked causing excess pressure?

Link to comment
https://www.sau.com.au/forums/topic/376791-gearbox-pressure-build-up/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hey guys,

Have a bit of an interesting one....

The oil from my gearbox keeps spewing out from the breather line which ends up near the top of the bellhousing. Bought the car with fresh shockprook oil put in and thought it must have been overfilled so i wiped away the excess, checked the oil level (just below the filler hole) and didnt take too much notice of it since. Now (2 weeks later since being wiped away) i had a look underneath the car and it's still spewing out. I've checked the oil level and its about 10mm below the filler hole, so its not overfilled.

Is there a small breather, like on a diff, on the gearbox that might be blocked causing excess pressure?

Change the shockproof for something else. We had the same problem in both our race cars and a couple of customers cars that shockproof went into.

Yes, I have had the same issue with the race car....it continually breathes smurf blood

I read maybe 12 months back, there was a bad batch of shockproof. I've been running shockproof lightweight for 2 or more years and it's never spat a drop out the breathers

Interesting....I bought mine about 12 months back, and from a very dodgy shop. Got any more info?

Yes, I have had the same issue with the race car....it continually breathes smurf blood

Interesting....I bought mine about 12 months back, and from a very dodgy shop. Got any more info?

Lol, had a fix to the issue in the race car?

I'll give it one more chance and i'll check back on it in a couple of days, if its still spewing it out i'll change to something different. Just seems hard to beleive about the supposed "bad batch", no offense moodles.

The gearbox seems to select all gears fine, the only sounds i can hear from it are when downshifting into neutral to a stop i can hear the gears/synchro whirring back down to the same speed (not a bad whirring).

Edited by joeyta22

sure....I put a breather/catch can up near the brake master cylinder...and refill the box after each race meet.....and degrease under the car often....and park it over an oil catch tray.

fixed easy!

  • 2 weeks later...

the problem with SHOCKPROOF oil is that about 12-18 month's ago, they discovered that the main ingredient

that made it as good as what it was, was carcinogenic so they had to remove said ingredient and replace

it with something else, and it's never been the same since...

I also have this problem at the moment and the bell houseing gets caked in oil after just 1 week of driving and its been doing it for the 5000km (1 year) its been in there.

I think lightweight shock proof is not worth anything anymore because i saw a track evo the other week use it and after 1 day it came out black?????????

What the point if it cant stay in the box or if it can it just goes black with heat stress...........changing to AMSOIL SEVERE GEAR Synthetic Extreme Pressure next service.

how much $ was this? im assuming 3 litres

I get all my oil through Harold at performancelub as linked above, awesome to deal with, prices are good and sends stuff out very quickly. Mine took about 4.2L with a little bit of spillage.

Yeah give it a shot central coast person, sound like you have the same problem as i did.

Come to think about it ive been having problems with the gearbox in my 180 drift-pig spewing out shockproof aswell (havnt driven it in about a month), i always just thought i had a leak around the top of the case. Hmmm im sensing a common theme here...

Edited by joeyta22

The GTR/GTST 25 boxes should take about 3.6-3.8L

And don't tell me that you put 3L in your mates mates car and it was full. Drive the car around the block and check it again.

Most of the R200 rear diffs will take 1.6-1.7L front diffs in the GTR about the same but closer to 1.5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It's unfortunate what Tomei USA has done to Tomei's name in general. I'm very weary of ordering parts from them now. I only order direct from a Japanse source (e.g Nengun). At least their logos are different, so you end up knowing what you have. 
    • Update Issues 5 (plus #4) - 10 After making a claim about issue #4's missing part, DeAgostini Japan sent a whole new issue #4 and it arrived about 2 weeks after that. That was back in early March. It took another 4 weeks to receive issues 5 - 13 though. This update is for issues 5 - 10. Ove the 5 issues the front left suspension and most of the engine have been completed. The quality of the castings and fit of the parts is quite good, it seems better than DeAgostini's BNR34 Skyline GT-R from the Fast & Furious 2 movie, which (to me anyway) doesn't seem to have as tight tolerances or quite as accurate castings.  Each issue has a lot of info about the 1989 - 1993 Skyline range and other Nissan models from that era, but the focus is on the BNR32 Skyline GT-R Nismo and the various racing it did in Japan, Europe (Spa 24hrs) and of course Australia. I've included some text translated with Google Lens in some photos and will add to them if there's anything worth including. 
    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
×
×
  • Create New...