Jump to content
SAU Community

Recommended Posts

hey guys, looking to get rid of my regoable track car.

Only selling due to working more hours and not being able to drive it as often as i should.

I have owned this car for almost 3 years and took it of the road due to losing my licence. car serviced every prac night with synthetic oil and filter, and plugs every 3 pracs as well as comp tested.

car has around 160 000 ish km on it speedo stopped working about 6 months ago, engine only has around 45 000 on it.

Mechanically the car has never given me any real trouble and anything else that has has been replaced.

engine:

s1 rb 25

splitfire coils

blitz injectors

z32 afm

tomei rising rate fpr

garrett 3037s, braided lines

turbosmart 48mm progate

6 boost exh mani

alloy rad

greddy cooler

oil cooler & relo kit, braided lines

fuel:

040 lift pump

044 external pump

alloy surge tank

driveline:

25 box

xtreme drift clutch

nismo 2 way 4.3 ratio

s14 rear cradle, solid offset bushes

solid diff bushes

suspension/handling:

33 brakes all round

project mu handbrake shoes

kazzama castor rods

custom shortened upper arms/nolathane bushes

cusco rear camber & toe arms

tien HA coilovers front & rear

front & rear strut braces

s14 lca's/boxed up

gtr rear swaybar

alloy steering bush

currently running stock 32 knuckles with s14 tie rods & ends

inside:

currently has stock seats but can come with Bride fixie on genuine Bride rail

deep dish s/wheel

boost guage

wheels:

front: work 17x9 +11 meshies with 90% ku36's

rear: work equip 18x9.5 +41 with shagged neutons

spares: 4x roh drift R's 18x8.5? + 38? all with 50% neutons

2x 17x8.5? + 28? equip's

2x 18x 8.5? + 30ish equip's, 1 cracked.

other:

3in dump/front pipe, screamer

3in straight through exh

bm44 brake master

ABS removed

wil also come with s14 steer rack with offset spacers which were used before when modded knucles were fitted until rhs one snapped, haha.

broken knuckles and a pair of stock 32 one's can be included as well.

cars 70% stripped but will come with stock seats and some trim etc

prob a few bits and pieces missing.

this car has legit rego with this engine but is currently un-rego'd due to using it as a track car, but can be re rego'd if needed.

car was dyno'd around last july on 98 pump with octane booster on 19psi and made 378kw and 580 Nm torque.

Price: 11000 neg

for more info or anything 0423387100, cheers jake. cars in sa

Attached thumbnail(s)

  • post-16822-13157108328381_thumb.jpg
  • post-16822-13157109141673_thumb.jpg
  • post-16822-13157109861489_thumb.jpg
  • post-16822-13157110700499_thumb.jpg
  • post-16822-13157111817925_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/376837-rb-25-r32/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To clarify what I posted above, I though you both had a situation where it cancelled sooner one way than the other.....if it is reasonably even where it cancels in either direction that is probably normal (consider gentle movements like lane changes, you don't want it to need half a turn of lock to turn the indicators off)
    • Son, in this country, that is a piece of Gyprock. f**king drywall. FFS! I also like the autocorrect of trailer to tablet. I was reading it and thing, "what the hell drugs is he on?" Then the photo made it clear enough.
    • SO whats the deal with this issue? I've read a heap of posts from the infinity owners in the US having full engine swaps done under warranty. Most claims are done on earlier cars than 2019 but I'm sure I've come across claims of 2020 models also having this issue. I like the 400r and Q50Red/S but can't fathom dumping close to 50k on a car with terminal issues!!! 
    • The above video is working normally. That is, that's how the right hand indicator should cancel when rotating the wheel left.
    • I noticed that I could see creatures on the moon when I turned my new headlights on. I thought I should check the alignment. It's pretty rudimentary but I just grabbed some dry wall and put it against my tablet and made sure the beam was below the height on the headlights. Ie the beam is at 600mm on my car, I just made it lower than that 7.5m away.  Not the best but it'll do until I can do it properly at the local shops.   
×
×
  • Create New...