Jump to content
SAU Community

My Rb30 Block Prep

deep_space

By deep_space,
in Engines & Forced Induction

 Share

Recommended Posts

Shoota_77 Veteran

Shoota_77

Posted
Posted

Sexy!

You've put a bit of work into that!

Another tip my engine builder suggested (but I'm not sure I'll bother with or not) is a splash guard I guess you would call it that deflects the oil dropping down from the oil returns in the head to the side of the block so it doesn't drop onto the crank which creates further drag and additional oil mist in the crankcase.

Makes sense I guess but where do you stop??

SilverECR33 Veteran

SilverECR33

Posted
Posted

thanks, yea the cleanup work was done by my mate Grootie from Grooties Race and Resto in Adelaide.

the rb30 center returns hug the wall as you can see in the picture next to the bottom of the piston bores, and dont present as much as a problem as the rear galleries do, as the center area is a tornado of oil anyhow due to the spray from out of the sides of the bearings. the rear galleries however dump most of the oil back into the sump and on serious drag cars or circuit cars, presents an issue wh ere the oil is actually going back up those rear galleries, therefore not allowing the oil to flow down there fast enough. Those cards you were talkin about would be best placed there , we thought about doing it, but its a prick of a place to try and weld in some cards/baffles, but it can be done. I think it would present the best payoff/benifit, i guess, for the oil control issue in these RB motors

Im sure this has been done to death previously, and ps im not a mechanic, just a hobbyist.

cheers.

luke gtr Grand Master

luke gtr

Posted
Posted

Sexy!

You've put a bit of work into that!

Another tip my engine builder suggested (but I'm not sure I'll bother with or not) is a splash guard I guess you would call it that deflects the oil dropping down from the oil returns in the head to the side of the block so it doesn't drop onto the crank which creates further drag and additional oil mist in the crankcase.

Makes sense I guess but where do you stop??

also called a windage tray.

thought about 2-3months after it was in the car, should have adapted the 26 windage trays to suit the 30.....

bah, next time...

  • 8 months later...
Ramius83 Collaborator

Ramius83

Posted
Posted

Sorry for bringing up an old thread but does anyone have more photos of exactly what holes to drill out so can do it before taking my block to the machine shop.

For the oil feeds, returns, or both?

StevenCJR31 Veteran

StevenCJR31

Posted
Posted

also called a windage tray. (NO windage trays sit in the sump)

thought about 2-3months after it was in the car, should have adapted the 26 windage trays to suit the 30.....

bah, next time...

StevenCJR31 Veteran

StevenCJR31

Posted
Posted

also called a windage tray. (NO . .the windage trays sit in the sump)

thought about 2-3months after it was in the car, should have adapted the 26 windage trays to suit the 30.....

bah, next time...

StevenCJR31 Veteran

StevenCJR31

Posted
Posted

quoted for what reason?

and possibly about to do this in the following month.

Had trouble sending from my phone, hence the double post, but BEARING SPINNER was telling SHOOTA that "its called a windage tray" . . .but thats not what SHOOTA was talking about

a windage tray is in place to stop the crank from whipping up the oil in the sump(as it spins) and possibly away from the oil pickup

SHOOTA was asking about baffles that deflect the draining oil from dropping onto the crank

luke gtr Grand Master

luke gtr

Posted
Posted

Had trouble sending from my phone, hence the double post, but BEARING SPINNER was telling SHOOTA that "its called a windage tray" . . .but thats not what SHOOTA was talking about

a windage tray is in place to stop the crank from whipping up the oil in the sump(as it spins) and possibly away from the oil pickup

SHOOTA was asking about baffles that deflect the draining oil from dropping onto the crank

ah, mis read it.

my bad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      Borg Warner EFR Series Turbo's V 2.0

      By niZmO_Man · Posted

      Not that I know from experience, but in theory you'd want your gate spring to be as close to target pressure as possible, so you'd go with the higher gate spring?
    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
×
×
  • Create New...