Jump to content
SAU Community

Recommended Posts

Installed a second hand alternator in my car a year ago hoping to fix a number of electrical issues and it helped but problems were still there

Over the weekend I trial fitted my mates alternator and my car had never run so well.

So basically I want to buy a band new alternator, any ideas of the part number for it? I believe Bosch sell a direct replacement.

Or does any one know the OEM part number(Not the Nissan number but the Mitsubishi/Hitachi part number)

Cheers for the help.

Link to comment
https://www.sau.com.au/forums/topic/376925-where-to-buy-a-new-alternator/
Share on other sites

I wouldn't bother calling nissan, they will want approx $1,000 for an alternator. And yes - Thats the OEM price. I got a bigger bosch that bolted straight on, and even come with a little plug adapter to allow the engine bay plug to convert straight to the alternator. It was literally plug and play.

Took me about 15 mins to change.

The factory one was 80amp and the Bosch one was 85amp. Held better voltage than the factory one.

The bosch replacement was $280.

Rebuilding\ Servicing your factory one will cost about $300. Waste of money.

I'll try and find the number, if not, I am going to see my mate (who has my old engine and alternator) on wednesday afternoon, and I can take a picture.

I may have the box at home still so I'll look on that too in a couple of hours.

I ended up buying a $90 alternator from a wrecker and surprise surprise its not outputting 14v either. Put my mates alternator on my car and steady 14v.

Went to Ashdown-Ingrams in Osbourne park yesterday and purchased a brand new 85amp Bosch alternator. Look to be plug in as it had the connector to plug into the standard loom. I will fit it on the weekend and will post up model details if it all goon.

only cost $250 as well so will be very happy if it fits.

  • 5 months later...

I've recently bough a couple of second hand Hitachi alternators , one from Pick and Payless - 1990 300ZX LR180 (80a)$50 , and one from Pick a Part Dapto - 1995 A32 Maxima LR1110-705 (110a) $35 . The first owed me $54 for bearings and works fine on the old Subaru , the second $63 for bearings and with a bit of stuffing around will be for my S2 GTS25T . The Skyline has its original Mitsubishi 80a alternator and its plug is different to the Maximas Hitachi one . I have the Hitachis plug and sub loom so assuming it fits up ok the wiring should be straightforward .

I'd be interested to see the adapter provided with the above Bosch alternator if anyone has a pic . Something like that would make it easy to splice together an adapter wire to save cutting up the original loom .

That aside researching higher output alternators shows that they make higher output even at lower revs than some cars std alternators . Going from a 50 to an 80 on the old Roo showed no voltage drop at idle (14.3-14.5) and the headlights don't dim at idle anymore . It probably doesn't hurt to have this kind of voltage or similar at the coil or pump either .

Generally luxobarges get the highest output alternators because they have that much electric BS in them and the trendsetters want all that operating in quiet cars and when idling at the lights .

Anyhow I'll get back when its in and running , cheers A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...