Jump to content
SAU Community

Sorry If Repost


N I B
 Share

Recommended Posts

Tight race.

Clearly the R35 GTR had the up front position.

Would have love to see the drag stip turn into a circuit race.

Watching them all to see how well they handle, blasting out of the corners and hammering down the straights.

That would have been exciting to watch.

Link to comment
Share on other sites

comparison bw a 458 and GTR isn't as simple as dollar vs acceleration

most 458 buyers would prob look past simple raw acceleration figures and see the added value in design, heritage, sound, feel, wank et al

what was a let down for me is the lf-a. With it's single clutch manual and mediocre quarter it's almost as if the game has already moved on before it even started

Edited by domino_z
Link to comment
Share on other sites

yeah interesting that the 458, the R8GT, the SLS, the LFA, the Z06 all had higher mph than the R35 (indicating they were all hunting it down to different degrees). certainly the 458 would have it beat in a race even slightly longer. even the GT3 RS was only half a mile slower to the 400m mark despite being 7th outright...

cool test though. :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...