Jump to content
SAU Community

Recommended Posts

New article in autospeed about my r32 GTR with rb30dett build:

http://www.autospeed.com.au/cms/A_112538/article.html

This is part II of the build - there is a link to part one (the rb26 bolt-on build) in the first para of the article.

Let me know what you think!

Nice reads. I had read your revisited one a while back.

I am somewhat curious of the power outputs... Your 2530 adventure saw you make stock like numbers..

And now your RB30 adventure seems to have panned out again to fairly entry level numbers.

By no way am I knocking you or your build, I admire the effort and especially your articles, yet what of the results in your eyes?

Um, 279 kilowatts at all four wheels on an r32 GTR is "stock-like" numbers?

Don't know where to begin with that one. As for 383 kw at the treads being entry level...

Nice reads. I had read your revisited one a while back.

I am somewhat curious of the power outputs... Your 2530 adventure saw you make stock like numbers..

And now your RB30 adventure seems to have panned out again to fairly entry level numbers.

By no way am I knocking you or your build, I admire the effort and especially your articles, yet what of the results in your eyes?

Edited by dorifticon

I did say dont take offense..

280 at all 4 is definitely doable for the stock turbos. A full exhaust and a tune will net that without too much drama.

I call 380 entry level when comparing it to 26s, I guess I felt a cammed 30 would fairy easily exceed 400 with these turbos. Its certainly not a small number but is more or less what you see from factory motors.

Have you ever run it on a different dyno?

Welll written Andrew; I agree with Steve-O...a must read for anyone contemplating a 30 swap.

I knew you were in trouble when i saw the pic of the HKS triple plate "quite abrupt engagement" lol. I just got rid of my HKS twin for a ORC.

I did say dont take offense..

280 at all 4 is definitely doable for the stock turbos. A full exhaust and a tune will net that without too much drama.

I call 380 entry level when comparing it to 26s, I guess I felt a cammed 30 would fairy easily exceed 400 with these turbos. Its certainly not a small number but is more or less what you see from factory motors.

Have you ever run it on a different dyno?

esp is one of the slightly higher reading dynos in town if you were thinking its a low reader?

MM no I wont go there. Interesting info tho..

Yeah my car makes a bit more power than it should on ESP's dyno (see my sig, that should be more around the 18psi figure for the turbo I'd think)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 馃檹 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 馃槈. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 馃槏 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
  • Create New...