Jump to content
SAU Community

Noob From Melbourne...just Bought Myself An R34 Gtt (Auto)...love It, Any Hints Would Be Much Appreciated


Recommended Posts

Hey guys/girls, the name is Alex, I'm from Melbourne, just got an r34 gtt 1 month ago and have already realised that its an expensive addiction...it took me 29 years but I finally got one, any help or hints along this skyline windy road will be much appreciated.

Cheers

Hi Alex,

I have had an R34 GTt sedan, auto, for several years. Great car.

For your car, I would suggest a major service, unless it came with a good service history. Included in that service should be the following;

1. Engine oil and filter change. I use synthetic.

2. Transmision fluid change. I use Nulon synthetic.

3. Check air filter. Mine had an aftermarket foam filter which was not oiled and was allowing some dust to pass through.

4. Change power steering fluid. Use the synthetic automatic transmission fluid.

5. Change brake fluid.

6. Change timing belt.. I changed mine at about 55,000 klms. It was loose and had surface cracks (over ten years old).

I would suggest changing at 100,000 klms or 5 years, whichever comes first.

If your car is the first series, the oil and air filters are the same as a VL Commodore.

Hope this is of some help.

Geoff.

Thanx for the reply mate, just chaned my oil (Royal purple fully synthetic 10W-40), bout HKS super hybrid air filter, regarding major service, just had it done before she came into my hands in the land of the rising sun (has metallic sticker on air box stating at which K's she had it done), bought it off Global vehicles in Fawkner who did a minor service on it, oil fluids etc., all the belts still have writing on them and look new so I hope for now I'm set lol...anything else u can think of?

Hi Alex,

I have had an R34 GTt sedan, auto, for several years. Great car.

For your car, I would suggest a major service, unless it came with a good service history. Included in that service should be the following;

1. Engine oil and filter change. I use synthetic.

2. Transmision fluid change. I use Nulon synthetic.

3. Check air filter. Mine had an aftermarket foam filter which was not oiled and was allowing some dust to pass through.

4. Change power steering fluid. Use the synthetic automatic transmission fluid.

5. Change brake fluid.

6. Change timing belt.. I changed mine at about 55,000 klms. It was loose and had surface cracks (over ten years old).

I would suggest changing at 100,000 klms or 5 years, whichever comes first.

If your car is the first series, the oil and air filters are the same as a VL Commodore.

Hope this is of some help.

Geoff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
    • I was more thinking so it doesn't flop around as much rather than for rotating it. Once you have the balance right, it should rotate well enough, depending on how much resistance there is on the pivot. I think you said the pivot point was on a bearing though didn't you?
×
×
  • Create New...