Jump to content
SAU Community

Recommended Posts

Name: Joey

Cell: 626-227-4255 (text preferred)

Location: Sherman Oaks, CA 91423 USA

Paypal - YES

Shipping - YES

All of these parts are my personal items. Either they are used on one of my drift cars or stored in the back of my shop. Most items are used unless stated otherwise. I don't sell janky,broken,or damaged parts.

Kakimoto Regu96 Catback Exhaust - $525 OBO

R32 G.A.B Coilovers - $400

Sparco Veloce Steering Wheel - $160

img1915ec.jpg6

Apexi Carbon Fiber Strut Bar - $120

Apexi Exhaust Control Valve - $110

(comes with everything for install. 3" Pipe Type)

img1373z.jpg

R33 Border Style Gauge Pod - $150

(ordered it for my r32 but it didn't feel like modding it to fit after receiving it)

img1905a.jpg

R32 GTR Trunk Wing - $150

25704621360436855051378.jpg

Scan Gauge 2 - $110

(only fits OBD2 cars. Works as a all in one gauge, fixes/Diagnoses CEL, connects to the OBD port)

img1917b.jpg

R32 GTR Front Grille - $40

img1928v.jpg

R34 Carbon Fiber Canards - $125

(can also fit r32 gtr bumper if positioned correctly)

img1921vy.jpg

Custom Painless Chasis Wiring Kit + Switch Panel - $450

(pre-wired. Legit full race wiring job. Nothing was skimped. Perfect)

Walbro 255lph Fuel Pump Kit - $75

JDM Weighted Shift Knob - $50

(only fits 10x1.25 - RB / SR / VG etc Transmissions, minor knicks/scratches. Weighted so it acts as a short shifter, about 5.5 x 2)

img1925v.jpg

OG HKS Mechanical Boost Gauge - $90

(comes with wiring and HKS Gauge Pod)

img1914l.jpg

NEW! Custom RB 6 Puck Clutch Setup - $200

(throwout bearing, pressure plate, 6 puck ceramic clutch, alignment tool. Good for about 350hp and 300tq)

img1935h.jpg

326 Power Rep. Wing - $200

(no damages, pre drilled for installation)

images7tq.jpg

4612669165987d1d07e9.jpg

PWR FMIC - $150

(good for about 400hp, bent fins, bent upwards on the bottom from previous installed brackets. Holds boost/no leaks and works great)

img1415y.jpg

OG Nardi Steering Wheel - $150

NEW!Daytime Running Lights - $30

(fits almost any bumper, install is easy. Comes with the mounting brackets/wiring)

img1924i.jpg

Custom Machine Gun Exhaust Tip - $60

(BEAST Mode! Sounds too intense. Track only type of cars)

machinegunj.jpg

Worksbell Hub Lock - $65

(shaved off bar code for extra security, comes with 2 keys)

img1910n.jpg

Gracer/Trust Sideskirts - $200

? Rear Spats - $100

? Rear Camber Arms - $60

JDM S.W.A.T Front Strut Bar - $60

NEW* N1 Oil Pump - $300

Mishimoto RB Radiator - $165

(few bent fins, low mileage use. No leaks or issues)

img1930w.jpg

Flex-A-Lite Dual Slim Fans - $140

(2 decals and has FAL markings on it. Damaged/Missing Bottom Piece!, doesn't affect performance)

img1933a.jpg

Sparco Fighter Bucket Seat - $300

(same exact one from the Fast/Furious 2 Skyline. Light Fading on top and scratch marks where the brackets mount up. Grey Fiberglass backing)

G-Force Blue 4pt Racing Harness - $50

(expires 2012, overall good condition)

img1936j.jpg

Custom CF S13 Gauge Cluster - $200

(Tachometer, Water Temp, Boost. Comes with Wiring. Carbon fiber backing can be removed and switched over to your cluster surround)

img1916zp.jpg

Nismo 2 Way LSD + Axles - $650

(about 5-10k miles, properly broken in. No issues)

NEW* Rb Water pump - $50

img1908y.jpg

Greddy Style Intake Manifold - $180

(polished/welded/blocked off coolant areas/drilled for haltech)

SR20 Freddy Oil pan - $50

SR20 Wiseco 9:1 Forged Pistons - $300

about 5k-10k miles, no issues. Never overheated. Will work great)

img1371z.jpg

SR20 Polished Crank - $150

SR20 Blitz Active Racing Clutch - $400

SR20 Blitz Active Racing Clutch - $125

AME Circular Spec*R's - $1,750 OBO

(18x9/18x10/+15/5x114.3 - GREAT condition, 9/10. Zero curb rash)

photo2nae.jpg

18219717097441628287916.jpg

SR20 Upper Water Neck - $10

SR20 Stock Turbo Elbow - $10

SR20 Crank Angle Sensor - $50

--------------------------------------------------------------------------------------

SOLD PARTS AS OF 9/19/2011

Nismo Thermostat

Burnt Tip BlastPipes

JDM Lightsaber Shift Knob

Ikeya Formula Shifter

Bee*R Rev Limiter

--------------------------------------------------------------------------------------

I am also looking to trade or buy these items!

(click link below to see what I need to purchase, cash ready in paypal!)

http://www.skylinesaustralia.com/forums/topic/377713-wtb-these-parts-asap-long-list-of-stuff-shipped-to-the-usa/

--------------------------------------------------------------------------------------

My Review Thread:

http://zilvia.net/f/...k-racing-1.html

BookFace:

www.facebook.com/9KRacing

--------------------------------------------------------------------------------------

photos added.

Since I hit the limit of postings some items don;t have pictures. Please pm me with what you are interested in and I can send you the direct photo.

thanks!

  • 2 years later...

hi, we are a chinese supplier for auto parts, performance parts as well some OEM parts, Just noticed you on R32, 33, 34, How about our parts, fuel rail, throttle body, intake manifold, suspension arm, coil over kit, turbocharger , oil pan etc. If you have interests on them, pls feel free to leave me message or email me at [email protected].

hi, we are a chinese supplier for auto parts, performance parts as well some OEM parts, Just noticed you on R32, 33, 34, How about our parts, fuel rail, throttle body, intake manifold, suspension arm, coil over kit, turbocharger , oil pan etc. If you have interests on them, pls feel free to leave me message or email me at [email protected].

Give me all your parts karnt!

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome. This is not really true. We have a whole forum here just for the NA shitboxen. And they are not very different from the turbo shitboxen. Just weaker brakes and gearboxes, and no LSD, for the most part.
    • I'm pretty sure it has an 040 in it @Duncan Also reading up, that turbo should top out at 250 as you first thought. It will be interesting to see how early it chokes due to the changes in the head too
    • Yeah confirmed they are Nismo 555s, found the boxes in the spares with the factory injectors in. Yeah the AAC has been relocated to allow reuse of the factory brake booster line, and yes confirmed it has a 1 way valve in it. Unfortunately the one on the car is cracked, I'll need to replace it. Pretty sure I've got all the AAC plumbing correct in my previous post, but I am going to source some new fittings with 90o angles to help with the hose routing and also one really specific moulded shape for the AAC intake to cold start hose (will raid the back of our local repco when I get a chance and work out some combo that works) One of the big things I learned in the GTR is you need to be able to get your hands all around the bay when something goes wrong. I've done a bunch of re-routing now and it should be much more practical now. Also got the BOV mount re TIG-ed by the local engineering shop so that should be good to go now. Never got to the fuel pump because of some life stuff today, but will pull it to confirm it is suitable for 300rwkw when I get a chance
    • Hello everyone, I am from Malta and have recently bought myself a fully stock 1992 Nissan Skyline GTS. It has the RB20DE engine and thus is NA. Unfortunately, not a lot of information can be found online related to the GTS, unlike the information for GTS-T and GTR variants. Apart of the Skyline, I also got a 1984 Porsche 924 2.0l NA and a 2002 Renault Clio 1.5DCi for everyday use. Excited to be apart of the community and perhaps get better information on cars such as the GTS.
    • The fuel pump bracket just slides straight up.  Below is a pic I stole off a site. But basically put hand in for fuel pump, wiggle it all about a bit while pulling up. 
×
×
  • Create New...