Jump to content
SAU Community

R33Gtsts2 -> Installing Alarm/keyless Entry

Torques

By Torques,
in Car Audio & Electrical

 Share

Recommended Posts

Torques Mentor

Torques

Posted
Posted

Hello there,

I am thinking about installing an alarm system. (not so much for the alarm but for not having to use the keys)

I did this before on different cars so I know a thing or two about it ..

Would anybody know if the S2 ever came with a keyless entry system from factory?

(That would mean that there might already be something prepared in the electrics)

Also what would be the best location for the alarm-controller?

Thanks .. :)

Carbon 34 Grand Master

Carbon 34

Posted
Posted

no they dont have KEYLESS entry

you can use RFID or buy a prepackaged setup to add to existing alarms

clarified

true keyless = leave your keys in your pocket, doors unlock when you get close, you get in drive off , with or without a key , might be push button start

remote control entry = key with power locks on the head. or alarm remote

  • 2 weeks later...
Torques Mentor

Torques

Posted
  • Author
Posted

I guess I was meaning remote control entry then ..

clarified

true keyless = leave your keys in your pocket, doors unlock when you get close, you get in drive off , with or without a key , might be push button start

remote control entry = key with power locks on the head. or alarm remote

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtst speedo out by 10kph

      By GTSBoy · Posted

      Nope. The seal is in the drive. A new cable would just fill up and continue to convey oil to the speedo head. To check if this is what is happening, take the cluster out, dismantle the speedo and have a look. You probably don't even have to dismantle it. If there is oil coming up the cable, the drive into the speedo will be grossly greasy. I had to manually (and delicately) clean the gunk out of my speedo.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      Thanks for the quick response mate, and I agree Nismo 555s, Z32 and high flow 2871 in OP6 housing (run by PowerFC) would all be "period correct" and should be a simple, reliable and reasonably quick track car.
    • Duncan
      R32 gtst speedo out by 10kph

      By Duncan · Posted

      It is normal for a speedo to read 0-10% high (unfortunately), intended by manufacturers and ADRs (although not in this case) to ensure your speedo does not read low if your tyres are worn. Speaking of which, what size tyres do you have on the rear, and what does they tyre placard say you should have? you can use this https://tiresize.com/calculator/ to determine what % difference that is causing Personally, when I buy tyres for a car I buy a size that will bring the speedo back to being more accurate; it if it reads 5% high I buy tyres that are 5% larger diameter. If you had an electronic speed sender like R33 onwards, the other option is to add a speedo adjuster but that won't work in R32. Finally, you  might be able to find a different sized gear for the speedo sender but that will be limited to what already exists (and I don't know what sizes do)
    • Duncan
      Wiring high beams in IC7 for R32 GTR

      By Duncan · Posted

      OK...so dumb question to check....do the hi beams actually come on when the push the stalk to engage them (keeping in mind your headlight switch must be at ON as well)
    • Kyer32
      R32 gtst speedo out by 10kph

      By Kyer32 · Posted

      Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
×
×
  • Create New...