Jump to content
SAU Community

Recommended Posts

I have two bootlids, one is plain, the other has the std R34 GTR wing on it. I only did a 6-8 laps at Winton with the rear spoiler and I dont think it makes much of a difference. When I get a chance I want to throw the wings and boot lids on a trailer and test one day at Winton...since I am moving to within a 45min drive of Winton for a project there are going to be plenty of Friday practices that I run down for

Uhuh. I have two boots as well, one with replica 32 GTR wing and Nismo lip, other with ARC alloy wing with adjustable gurney flap. ARC defs creates more rear downforce, but unbalanced it front to rear (I don't have a front splitter).

Suprisingly, adding the Nismo lip to the stock GTR wing made a noticable difference. Evidently creates a high pressure zone atop the boot lid.

Well, I have a front undertray, though its not on the car at the moment as it makes a wheel alignment a pain and I need to get the car aligned and the oil cooler installed properly as the panel beater all that time ago didnt have the time to mount it properly. Also makes it a pain to get to the brake air guides etc which I can now finally finish because the Stoptechs are on and never coming off

So when the boot lid goes on I will have the undertray on

I have an undertray/skid plate, it made a small improvement but no match for "big wing like Mig fighter jet" (Russian accent)

I hope to get the mojo to make a front splitter extension about 4/5 inches to actually get some front downforce, rather than just trying to minimise lift.

you want voltex wing big boy. bit expensive but heaps good white man magic.

either that or use the C-West GT wing II - Suzuka like what I sold berry for his R34 (in it's V1 guise). they make R34 bolt on version and it works bloody well.

Thanks for the heads up.

It would be good if I could put a leading edge lip on the front of my undertray. Will e easy to do, only problem is I drive my car daily so god knows the Cossie is a nightmare being only 50mm off the ground...dont want the R32 to be the same so would have to be removable for daily driving duties....the ideal solution I have is too expensive so wont go there :)

if you've got two boot lids, so who cares how many holes there are in one of them?

I'm sure expensive Voltex wings are very good, but my $300 CF China wing worked well enough to totally transfom my car from near uncontrolable oversteer to plough understeerer in back to back sessions on the same day not touching anything else on the car. While only costing ~3kph in top speed, but that was into a headwind that day... And it dented the hatch in on my 180SX. I went 7 tenths quicker than before on those tyres, while being very compromised by understeer. If you could balance that out with front aero, you'd easily make at least that much time again. probably more. If a $3000 Voltex wing works better, its only going to make your life more difficult to get enough front aero.

The gurney flap would make a difference. But a dual plane wing is technically a better solution. You need one of these...but woudl cost waaaaay more

srcx_skyline_gtr-img600x450-1317020464ep9lwg21910.jpg

But, truth is I dont pretend to know that much about aero. To me its all wank for 99% of us. We end up with ugly cars with parachutes attached...but there are a few basic concepts that seem best to follow

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
    • Well, do ya, punk? Seriously though, let's fu<king go! The colour and kit looks amazing on the car. Do you have any shots from the rear? I don't quite follow how the model came around. You bought the white kit and he modified it to match your car? Looks nuts either way!
    • So my car is finally back from paint! This took an absolutely insane amount of work and should get it's own build thread - but I didn't build it. It was completed by Troy @ https://scalekustoms.com.au/ I originally bought the AOSHIMA URAS Type R kit while I was in Japan, it's supposed to look like this when assembled: Now, I thought that was cool enough until I opened the box with Dismay, as there's no way I could possibly have completed it. The thing is 1/24 and has details down to the steering wheel horn button, which is a 2mm diameter sticker. I originally wondered if someone could make it at all, as is - But then things got a little carried away. It's worth noting that the model does not have an openable bonne, let alone engine bay, OR an openable boot. - Troy has worked wonders with 3D printer and presumably better eyes than I will ever have. My photos suck, so I will post up some of his in-progress ones he sent to me during the way. Unsuprisingly, he is very detailed. A lot of these are out of order. But he: 1) Made a LS engine and an engine bay appear out of thin air 2) Made the bonnet removable 3) Printed the rims I will buy in the future (or any rim you want) 4) Printed and added the wing that is going on 5) Tinted my back windows as this is what my car has IRL (privacy glass) 6) Added a licence plate. 7) Somehow did the interior 8) 3D Printed my actual seats 9) Made the exhaust under the car connect even though this is likely invisible. 10) Created a boot with my fking battery box, power steering reservoir, subwoofer and toolboxes back there. To say it's insane is an understatement. And I f**ked it all up because when I was re-mounting the wing (it broke in transit) I spilled glue everywhere and ripped paint up and Gregged the rear half of the car. Which about makes sense. Also, this arrived on the same day. Quite the change from: I spent 16 hours per day over the next 3 days pre-christmas putting the interior back together, mounting lip, fixing various bodykit problems with window mouldings, etc. and servicing, rebuilding my 370z brakes to go on the car 'soon', messing with heights to check clearances for new wheels, etc. I also had a foray into mounting wiper-mounted washer jets which was an absolute disaster. The bodyshop has welded (and painted) over the stock jet locations for reasons unknown to everybody (i.e they forgot) I also wanted to wire in the oil pressure sensor on Christmas Eve which was a BAD IDEA. You do not know terror like pulling your ECU apart, pinning in half-fitting pins that aren't the right ones, but trying anyway because it's Christmas eve, putting your ECU back together and having a no-start condition with a fuel pump not priming. Then you undo all your work and the fuel pump still doesn't prime. So after all that terror and horror and pain and tedious disassembly, the issue was the relay in the boot which seems to have died/stuck when I was turning the car off and on about 700 times testing shitty washer jets. I also re-wired the fuel pump power plug which fell apart in my hands. I am very happy I had 3 extra pre-made ones from a few posts/last Christmas's breakdown. https://bluewireautomotive.com/products/10-x-pcm-ecm-ecu-terminals I have put an order for these in, so I can actually add the pins to the ECU properly. The commodore ECU does not have the pins for Oil Pressure via ODB2. However the ECU can support it if you create the pins and wire them in. So for round two, and somehow attempting to route that into the engine bay through my impossible engine bay grommet is a fight for another day. It's 40C in Melbourne tomorrow, I am half tempted to drive the car with the aircon on to deliver presents to my partner's family and see if it helps with the overheating-on-40C-days-in-traffic-with-aircon-on-only issue that the vents were intended to solve. Do I feel lucky?
    • Yes, while being... strictly unnecessary. Tuning is a bit like quantum physics. You don't need to understand what Schroedinger's equation actually means. You just need to run the computation and accept the answers. With tuning, you just push page up/down until the exhaust tells you that you've got the fuel right. The VE can stay hidden behind the curtain like the Wizard of Oz and you'll never need to know what he looked like.
    • The second part yes, the first part about easy VE calculation is something I've seen a few people talk about online.
×
×
  • Create New...