Jump to content
SAU Community

Intercooler Upgrade - Pwr

Waxhead

By Waxhead,
in Engines & Forced Induction

 Share

Recommended Posts

Waxhead Community Regular

Waxhead

Posted
Posted

I have just bought a new PWR intercooler to install on my R32 GTR. if I install the new intercooler, given that it has slightly higher volume (I think) than the standard GTR intercooler, would it be safe to drive without a retune, or would a retune be required straight away??

Thanks for your help

Link to comment
https://www.sau.com.au/forums/topic/378641-intercooler-upgrade-pwr/
Share on other sites
blue_vl_t Rising Star

blue_vl_t

Posted
Posted

The difference will be negligible, I wouldn't worry about it.

What power are you chasing? The stock cooler seems to do a decent job.

If you are going to run it up on the dyno, back to back testing between the two cores would be nice to see.

djr81 Grand Master

djr81

Posted
Posted

Does the outlet look like the one below?

The top intercooler is for an R32 GTR from PWR. The bottom is an R32 GTR intercooler. One of these things is not like the other.

My question is this: Have the muppets at PWR fixed their drawings so their cooler actually fit now?

post-5134-0-31288400-1317352753_thumb.jpg

Waxhead Community Regular

Waxhead

Posted
  • Author
Posted

Does the outlet look like the one below?

The top intercooler is for an R32 GTR from PWR. The bottom is an R32 GTR intercooler. One of these things is not like the other.

My question is this: Have the muppets at PWR fixed their drawings so their cooler actually fit now?

Mine sort of looks half way between the two shown in your picture. The PWR inlet/outlet doesn't seem to point down as much as the original GTR cooler, but hopefully the mounting brackets are located at slightly different angles to offset this.

Did you bother installing yours or did you just send it back?? If you mounted it, what did you have to modify to get it to fit properly?? And if installed ,did you need a re-tune??

Harey Veteran

Harey

Posted
Posted

What sort of power are you making out of your R32 GTR? If its highly modded and making big power then I would definitely want to get the tune updated to get the most out of the cooler change (assuming the standard one is a restriction).

If its only lightly modded then yeah dont worry about a retune, but I wouldnt worry about the cooler either. The standard gtr cooler is fine for big power 350kw etc.

djr81 Grand Master

djr81

Posted
Posted

Mine sort of looks half way between the two shown in your picture. The PWR inlet/outlet doesn't seem to point down as much as the original GTR cooler, but hopefully the mounting brackets are located at slightly different angles to offset this.

Did you bother installing yours or did you just send it back?? If you mounted it, what did you have to modify to get it to fit properly?? And if installed ,did you need a re-tune??

Well it may fit. Just check it as best you can before you start ripping parts off the car.

I had mine fixed locally and installed. That invovled cutting off the inlet pipe & rewelding it in the correct position. As far as I can remember PWR "warranty" does not include freight and as they are in Queensland and I am not it would have taken weeks to get them to fix it. Ignoring the fact that I no longer had any confidence in their ability to get anything right.

Had a bunch of other things done at that time so the car got a retune anyway. You shouldnt need one.

Can you post a pic?

As an aside is there anyobne who does a decent 3" thick tube & fin intercooler for an R32?

Piggaz Grand Master

Piggaz

Posted
Posted

+2 a mate has a PWR on his R33 GTR and his tuner at AVO thinks he will gain 40+kw by changing it out for another brand because it is a restriction in the system. 29psi was only seeing 370kw from twin HKS 2835

*Raises eyebrow*. Thats a REALLY poor result!

Nee-san Grand Master

Nee-san

Posted
Posted

Well it may fit. Just check it as best you can before you start ripping parts off the car.

I had mine fixed locally and installed. That invovled cutting off the inlet pipe & rewelding it in the correct position. As far as I can remember PWR "warranty" does not include freight and as they are in Queensland and I am not it would have taken weeks to get them to fix it. Ignoring the fact that I no longer had any confidence in their ability to get anything right.

Had a bunch of other things done at that time so the car got a retune anyway. You shouldnt need one.

Can you post a pic?

As an aside is there anyobne who does a decent 3" thick tube & fin intercooler for an R32?

TRUST ?

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

+2 a mate has a PWR on his R33 GTR and his tuner at AVO thinks he will gain 40+kw by changing it out for another brand because it is a restriction in the system. 29psi was only seeing 370kw from twin HKS 2835

Not the first time this has appeared over the years.

stock GTR core for 400rwkw = win.

Brezza Proficient

Brezza

Posted
Posted

i had my cooler changed from std r34 GTR (60mm) to a 70mm ARC core and it made no difference at 350kw

the only real diference was that it would pull 350 for three consecutive runs, so it took a little longer for heatsoak to set it. but as far as power difference there was none.

a bigger/better cooler will only come into play when repeating runs on a dyno because it might stay cooler for longer?

just letting you know my experiences.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 power steering

      By GTSBoy · Posted

      If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • joshuaho96
      R34 power steering

      By joshuaho96 · Posted

      You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Mike K
      2007 V36 Skyline rear stereo plugs.

      By Mike K · Posted

      Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Kinkstaah
      SAUNSW - Cruise - Evening Old Pac Run - Sat 23rd November

      By Kinkstaah · Posted

      Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • drifter17a
      R34 power steering

      By drifter17a · Posted

      Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...