Jump to content
SAU Community

Recommended Posts

that run looked good and a 1.66 60' is really good to, that poor EMO thought he had it then noooooo monica!

better tyres giving you the ability to leave the line on boost will see some even better times

yeah 3rd gear has something about it that just gets it going

that run looked good and a 1.66 60' is really good to, that poor EMO thought he had it then noooooo monica!

better tyres giving you the ability to leave the line on boost will see some even better times

yeah 3rd gear has something about it that just gets it going

HAHA, that made me laugh. I think my gf thinks Im crazy. :S

well done. . .making me rethink my twin setup. . .

Oh and this one, HAHA. Lol central

lol only a couple more psi and you'll be in R35 territory :)

I did a couple runs against one and I got horribly owned! It was doing 11.1sec passes over and over and over again. I did beat him on a 60 footer tho because his electronics let him down :D

Haha yeh it's something along those lines....either way, you could teach a monkey to do it and I know what I'd rather be spending $160k on ;-) The guys on SAU too...and pretty sure the car was near new and he's sold it now.

Yeh I'd rather the 32 and 33 too ;)

yeah 11.99 you need a SS licence, 10.99 you need cage, 140mph you need shute, I ran 11.48 then turned up boost and ran 11.36 then 11.38 and no one said anything about a licence then the next time I went down I ran 11.8 (vs JEZ) cranked a piston on first pass and was told to leave or get a licence, so depends if the ANDRA rep is there or not I guess

R32 GTR plus $10,000 in mods = low elevens, R35 plus tune equals low elevens, so $30,000 v $150,000 , having said that if I had $150,000 to spend on a car it would be a R35

Hahaha actually, fully worked R34 for me thanks ;) Phat and in nice glossy black, on bronze Te37's....RB28 or 3L with a dirty big single :)

Then whatever money remains can be put towards keeping her fit and healthy for as many track outtings as I please ;)

Hahaha actually, fully worked R34 for me thanks ;) Phat and in nice glossy black, on bronze Te37's....RB28 or 3L with a dirty big single :)

Then whatever money remains can be put towards keeping her fit and healthy for as many track outtings as I please ;)

You crazy

Are there a lot of modded R35's there? There's 2 here that are getting the AMS treatment. . .one is the Alpha 9. . .the other. . .Alpha Omega. . .can't wait to see what they can do. . .

R33's ftw btw. . .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
×
×
  • Create New...