Jump to content
SAU Community

Recommended Posts

It's kind of shit gig to get the 6 speed rebuilt not many people want to do them.

They were never meant for track work. I was going to get the whole thing rebuilt while it was off to the shop, but I've been advised by a few shops to not bother.

So I'm putting a brand new 5 speed box in.

Brand new 0_0 Big spender!

Nice work, I know SFA about Evo's but even I've heard the 5spd is the stronger box.

Could it potentially mean less gear changes and faster as a result with the wider ratios? Or does it work the other way? 

It's not availability. The story goes: Mitsubishi didn't think that parts were necessary for 1 2 synchro. You can buy the whole assembly that includes the synchros, but it costs $1500 + lol.

So it's better to go 5 speed. Especially in the long run.

Upgraded synchros are plentiful for them.

Not the reason why it's stiff to select gears between 3rd and 4th. Something to do with a selector spring or something breaking off.

You have to disassemble a fair amount of the box just to put that tube in.

It isn't a 5 min job and needs to be done by a workshop.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
    • Do you have any before and after photos? That's $200 just for the hydro blasting?
    • It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
×
×
  • Create New...