Jump to content
SAU Community

Recommended Posts

Hi All,

I am looking for a Car Audio & Security installer in VIC, if anyone can please suggest or recommend an installer and especially with V35 experience. You can post on this thread or private message me, it would be very much appreciated. FYI, I am currently looking at Street Sound & Vision (SSV) in Thomastown...

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/378977-car-audio-security-installers-vic/
Share on other sites

I already gave you a lead in boronia. can give you a second in moorabbin if need be. shame I'm not in town or I would do the car myself.

That would be awesome if you were coming down in the near future, I can wait till then... I rather have someone with extensive experience dealing with V35's touching my car.

I'm planning to put in a new sound system as well, so just trying to suss out SSV cause they gave me a very good deal for a system and I put a deposit on it, which I should have waited... :unsure:

Thanks for the referrals guys!

Just got my gtr done with a full system and very complicated immboliser, got it back last night and he did an immaculate.job, he lives in templestowe and his got awsome prices. Pm me if your interested

Heyy guys

yeh im kinda on the same boat as this guy.

i want to get a good alarm system package, iv seen some with built in turbo timer, as well as remote start

where is a good place i can get a package like this, or similar. could u also include roughly the price as well.

cheers

Heyy guys

yeh im kinda on the same boat as this guy.

i want to get a good alarm system package, iv seen some with built in turbo timer, as well as remote start

where is a good place i can get a package like this, or similar. could u also include roughly the price as well.

cheers

FYI

turbo timers and remote starts are a defect in australia

As many threads will already state - turbo timers are illegal to use in Australia. Just drive slow for the last coupla minutes of the journey and let it cool down. For reference:

ADR 25: Turbo timers are not to be fitted to vehicles manufactured on or after 1 January 1972 (ADR 25 Anti-Theft Locks). ADR 25 requires that the normal function of the engine only occurs when the ignition lock is in the engine on position.

That basically covers both turbo-timers and remote start - in each case, you have the normal function of the engine with the ignition lock isn't engaged.

  • 3 weeks later...

I just had my stereo installed by riverside customs in werribee. I am no audio expert but they did a really good job in my opinion really neat work and they didn't take any shortcuts they take their time and make up all their own spacers etc.. They are apparently one of the few installer in Melbourne that still specialize in large fiberglass custom installs. Anyway I had installed a kenwood ddx8036bt headunit, alpine type X components, Polk 500.4 amp and morel rears. What really impressed me was that when I went to pick the car up they told me they dropped a bit of solder on the driver side scuff panel and it had made a mark. They told me they had fixed it best they could and had ordered me a new replacement one. I couldn't believe it when I had a look as I could not see anything even when it was pointed out to me. In my book that alone makes them someone worth talking to as I think it is so hard finding honest people that will do a good honest job these days. I will definitely go back to these guys in the future and they are worth speaking to if you live out west.

I just had my stereo installed by riverside customs in werribee. I am no audio expert but they did a really good job in my opinion really neat work and they didn't take any shortcuts they take their time and make up all their own spacers etc.. They are apparently one of the few installer in Melbourne that still specialize in large fiberglass custom installs. Anyway I had installed a kenwood ddx8036bt headunit, alpine type X components, Polk 500.4 amp and morel rears. What really impressed me was that when I went to pick the car up they told me they dropped a bit of solder on the driver side scuff panel and it had made a mark. They told me they had fixed it best they could and had ordered me a new replacement one. I couldn't believe it when I had a look as I could not see anything even when it was pointed out to me. In my book that alone makes them someone worth talking to as I think it is so hard finding honest people that will do a good honest job these days. I will definitely go back to these guys in the future and they are worth speaking to if you live out west.

WOW! Nice, that is good service there! I did come across Riverside Customs when I was initially quick searching... I'm just not sure what to do, cause I went into SSV to have a look and suss them out, the guy gave me a good deal for an Alpine package (of Type S: 5 Channel Amp, Sub, Components & Coaxials and IVA-W520EBT) for $1700, a saving of $1100 and so I put down a $100 deposit to secure the equipment. I wonder if that's too good to be true, but I'm going to ask to upgrade to the Type R at an additional amount. :glare:

  • 11 months later...

Hey everyone, Tried finding a more recent thread with no luck...

Basically my old R34 got stolen right out the front of my house in mid September this year (no alarm in it like a dumbarse because i thought i lived in a quiet/nice area).

I'll be picking up my new 34 sometime next week and really want to get an alarm system fitted fairly soon

Some points to note:

  • Located in the Northern Suburbs of Melbourne (South Morang)
  • Not sure what the "normal" price range is for something like this, but would be willing to go around the $450 mark (Edit: Am flexible on price as i'd rather spend extra for a good alarm install than a better sound system)
  • Alarm system will have to adhere to the Australian/NZ standard so the insurance company is happy.

Would like some advice on shops to go to or even feedback if the ones mentioned above were good or not?

Any help would be awesome!

Edited by Daco

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, they look good. I should try to fit them on mine. But being a GTSt, the guard shape probably doesn't suit properly.
    • Nah, it's not a simple voltage divider. I'm not enough of an electronics guru to know how they make these circuits work. If I had a better idea of how the ECU's temperature measuring is done, I could then actually do as you want, which is turn that resistance chart into a voltage chart. But my approach has not worked. What I did was interpolate the sensor ohms values for the temperatures you listed, as you did not have any of them on a temperature ending in zero or 5. These are: °C ECU V sensor ohms (interpolated) 58 2.68 11.85 57 2.7 11.89 56 2.74 11.93 54 2.8 12.01 49 3.06 12.208 47 3.18 12.284 43 3.37 12.42 I then assumed 5V supply to the resister and calculated the voltage drop across the sensor for each of those, which is just 5 - the above voltages, and then calculated the current that must be flowing through the sensor. So you get:             Values in sensor °C ECU V sensor ohms (interpolated) Supply volts Volt drop Current 58 2.68 11.85     5 2.32 0.195781 57 2.7 11.89     5 2.3 0.19344 56 2.74 11.93     5 2.26 0.189438 54 2.8 12.01     5 2.2 0.183181 49 3.06 12.208     5 1.94 0.158912 47 3.18 12.284     5 1.82 0.14816 43 3.37 12.42     5 1.63 0.13124 And then use that current and the ECU's sensed voltage (which must be the voltage drop across the in ECU resister is there is one) to calculate the resistance of that in ECU resistor. You get:             Values in sensor   Other resistor °C ECU V sensor ohms (interpolated) Supply volts Volt drop Current   Volt Drop Resistance 58 2.68 11.85     5 2.32 0.195781   2.68 13.68879 57 2.7 11.89     5 2.3 0.19344   2.7 13.95783 56 2.74 11.93     5 2.26 0.189438   2.74 14.46381 54 2.8 12.01     5 2.2 0.183181   2.8 15.28545 49 3.06 12.208     5 1.94 0.158912   3.06 19.25592 47 3.18 12.284     5 1.82 0.14816   3.18 21.46325 43 3.37 12.42     5 1.63 0.13124   3.37 25.67816 And that's where it falls apart, because the resulting resistance would need to be the same for all of those temperatures, and it is not. So clearly the physical model is not correct. Anyway, you or someone else can use that information to go forward if someone has a better physical model. I can also show you how to interpolate for temperatures between those in the resistance chart. It's not fun because you've got to either do it like I did it for every 5°C range separately, or check to see if the slope remains constant over a wide range, then you can just work up a single formula. I'm just showing how to do it for a single 5° span. For the 58°C temperature, resistance = 11.77+2*(11.97-11.77)/5 The calc is a little arse backwards because the resistance is NTC (negative temperature coefficient), so the slope is negative, but I'm lazy, so I just treated 58 as if it was 2 degrees away from 60, not 3 degrees away from 55, and so on.
    • Um.... This is not easy. I will have a fiddle with it, but make no promises. I think, given the explicit resistances vs temperature, and your ECU measured voltages, it should be possible to match them up. I will do that by assuming a 5V supply from ECU to sensor, find out how much current would have to flow to produce that voltage, then use that current as a .... nah f**k. That won't work. The supply voltage is fixed, but there's nothing to say that the ECU regulates the current too. Um... I dunno. I guess there's a voltage divider setup in the ECU. As in, there's another resistance between the ECU's sense terminal and ground. That way, as the sensor resistance changes, that's how they get a floating voltage that varies with the temperature, without having to control the current. Give me a minute or 3.
    • *that* is a question for chatgpt (or someone that understands maths....but I'd try chatty). Drop them the table and ask for the formula
    • Alright. Exhaust has been looked at, and booked in 'soon'. I'm not 100% convinced it's going to be as good as possible but I'm going to go with it anyway. If I get a reasonable thing that works for 10 years I mean that's twice as long as I've lived with the current one. I have a more pressing issue. I have fixed my MPVI3 (by buying a new one). Excellently, one can wire in analog 0-5v inputs to the ECU itself. I had wideband already via Serial so I also wired it in via the direct input. The idea being I can use the standalone logging without a laptop and have Wideband data in it. The other wire I thought I'd use oil temp. This is where I've gone crazy. HPTuners requires you to implement a formula so you know how much volts = how much temp. This seems relatively simple to me. However I cannot find the scale for this anywhere on the internet, nor decipher how to figure it out without removing the sensor from the car. All I know is that voltage actually goes up as temperature goes down. I am using the actual gauge, so I can see what the temp is. The signal wire has been branched off into the MPVI3. EXAMPLE: 2.68v = 58C 2.7 = 57C 2.74v = 56C 2.8V = 54C 3.06V = 49C 3.18V = 47C 3.37V = 43C I think the gauge is 50-150C. It may be more. It may be less, because I can't find it for the love of f**k. It appears all the information about the gauges I have has been scoured from the internet, but the sender is VDO 320.021 I believe the resistance chart is this How the f**k do I convert this to a voltage? Once I have a voltage... I then have to perform this transform of said voltage to show it in the scanner: https://www.hptuners.com/help/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm @GTSBoy you're probably my only hope here TEST YOUR MIGHT
×
×
  • Create New...