Jump to content
SAU Community

Recommended Posts

Few boxes arrived today!

One rad to replace a leaky one for the Whale, and another for me. A Nismo thermostat, and the motordyne 5/16 plenum spacer.

I'll chuck the rad and thermostat in when I get the next chance, but I'm not going to fit the plenum spacer until I go for my next tune, in case it leans it out too much. Better safe than sorry. Next to the AFM!

6962844790_9a91abd6a7.jpg

IMG_4318[1] by PNM35, on Flickr

Edited by PN-Mad

Put the number plate in the bottom of the bar Craig - looks horrendous there!

lolz........the plate won't stay there....I had to put it somewhere for the trial fit and thats where the holes were from the previous owner!

.......sorry Alex!......I'll stop again now!

So, installed my radiator yesterday. It wasn't "drop in" but it was pretty close. I did modify a couple of little things for future ease. The Nismo thermostat was a bit of a pain. Hard to get that gasket in place, and find the bolt holes. Anyway, its in, and not leaking.

Strapped up the laptop for the trip to work yesterday. Thermostat opens at about 75 degrees, from there temp dropped to 73. once I started warming it up a bit, normal cruising temps were from about 77-82 degrees. If I was at lights, that went up to 88 or so, but soon dropped back down. I got stuck in traffic, and temp went up to the normal 98 where the fans cut in, and I saw a noticeable increase in speed for the temp to drop back down to 93 and fans switch off. So, its a win. No leaks, this morning I topped up the system, and made sure the last of the air was out. I'll check again in a few days time that its fully bled.

Overall its a drop of about 10 to 12 degrees. Normal Cruising temps were just over 90 generally, and at lights you could expect it to go up to 95 to 98. I did have to pick up some barbs from pirtek for the AT cooler lines, and replace one hose that was too short to reach the new inlet. Barbs were cheap, and I sealed them with tape and locktite.

Pics!

6976816336_8ee9b9388a.jpg

Why is the Mishimoto better? Look at the core size! It also has much wider fins if you know what I mean, which should let more air into the engine bay to cool things.

6976815458_c63e40ace0.jpg

6976814582_df1cc53875.jpg

Nice work....your temps look to be about the same as mine on cruise.....however at the lights I'm lucky if I see 88. If I start getting up it I get to about 82-84.

It's a good rad aye!!!

Yeah, but you got your fans set to 86 or something don't you?

My stockies kick in @ 98!

It is nice. I had to take preventative measures to make sure that the condensor wasn't touching/rubbing, and one locating pin was about 3cm out of line. Dr Dremmel saw to that!

unfortunatly no moar powers in a radiator :(

No more powers but a track day won't see you overheating. Even my old mitsi Chinese copy rad held a perfect 80-82 at Wakefield!

We are do a Wakefield day btw....nationals iin November for CSS! I'll be there wings and all!

Nice work Alex, the car just keeps getting better!

No more powers but a track day won't see you overheating. Even my old mitsi Chinese copy rad held a perfect 80-82 at Wakefield!

We are do a Wakefield day btw....nationals iin November for CSS! I'll be there wings and all!

It's gonna look sweeeeeet!

manta%20baby.JPG

Edited by Daleo

Just a quick note to say that Uprev have now cracked the Cooling fan codes, and I am now able to determine the temp that the thermos come on. They must have heard I changed my radiator.

I love these guys....

:wub:

Question is - what temp do I set it at? I was thinking high 80s maybe early 90s. Stock is 100 degrees.

Edited by PN-Mad

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...