Jump to content
SAU Community

Recommended Posts

Nice helmet, but how do you see out with all that writing?

Also - attachicon.gifdream boat.png

Ah, Forum auto correct - keeping things clean ;)

Nice one Alex!

The new range of Bell Helmets have only just been released in Australia, and the specs looks really good.

The prices definitely won't stay low forever.

You'll look the part; so nothing else really matters!

Yeah, it felt the best on the head. The saleswoman said she was getting really good feedback from people about them too. The Arai ones I tried felt like they were pressing into the top of my head! Not comfortable at all.

Now to get my pose on at the track ;)

get some go pro action vid's happening!!!!!

I'll grab one of the clubs Go-Pros and get some footage. Editing might just take a little while.

Closed faced helmets have gaides! Open face for the win....that way people can see how scared and out of control you are!

My face is too pretty to be smeared all over the armco :P

Closed faced helmets have gaides! Open face for the win....that way people can see how scared and out of control you are!

Whenever I see someone in an open face all I can think of is this;

03851-2.jpg

Open face ftw! e.g. If I had a closed faced helmet the Pit crew who you can clearly see me talking to would not have been able to here me say "GIMMMEEE MORE IN TEH FAAAAACE!!!"

IMG_2387.JPG

I think I understand now. Edited by Daleo

As you can see by the photo below its not real clear what the driver is wanting! It actually looks like his saying "I'm going to Die!!". In actual fact his saying "I think I just shit my pants!!!"

post-37023-0-82322900-1365114670_thumb.jpg

The dyno is a very important tuning tool Craig, perhaps you should use one occasionally. Your engines would last longer. :P

Last time it was tuned there was a tiny split in the vac line to the fuel reg I didn't see, which the map sensor also hangs off. It seems those sensors are quite important... So I had to get a re-tune once I found the split, as the current map went to shit. Luckily I got in just before the SAU dyno day tomorrow, so I wound the boost up at the same time. Tomorrow will be for da queenz. ;)

Jelly?

Well, thanks to SAU NSW, and Pezhead, our pres, I have rented a couple of go pros, and a lap timer. Apparently he can put he two together and have one of those cool data overlay things, that'll make me look like a pro! Or film some awesome moments and tell me how much of a pusseh I am :P

I gave the car a detail, de contaminate, clay bar, and using a random orbital, cut/polish, and a wax. Looks great I think. A least ill look good, if not being fast!

Well, thanks to SAU NSW, and Pezhead, our pres, I have rented a couple of go pros, and a lap timer. Apparently he can put he two together and have one of those cool data overlay things, that'll make me look like a pro! Or film some awesome moments and tell me how much of a pusseh I am :P

I gave the car a detail, de contaminate, clay bar, and using a random orbital, cut/polish, and a wax. Looks great I think. A least ill look good, if not being fast!

Whens this track day?

Would be good to see what a stock m35 can do.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that.... If only I could do something once and be happy with that, like some people do....
    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
×
×
  • Create New...