Jump to content
SAU Community

Recommended Posts

Hi every1, Ive recently bought a 34 gtt as my daily until i find my gtr.

I have noticed that under any load, 5th gear is starting to get resistance while trying to put it in.

It is okay when driving around town, but when on freeway its obvious. Doesnt happen when shifting down, only up in to 5th.

Had a similar issue with my 350z and had to get the box rebuilt and a new synchro put in to fix it (cost me $1500).

But my 350z would crunch hard, this doesnt. There is a slight noise but still slots in pretty easily.

Im assuming the synchro for 5th is on the way out, any1 have any suggestions where is the best place to take it and a idea on cost? I live in Rouse Hill in Sydney.

Still deciding whether to fix it or just try and live with it until it completely breaks.

Thanx in advance.

Rouse Hill? Call Unigroup Engineering, talk to Yavuz, tell him you need redline shockproof put though your gearbox for you and book it in. Mention that the club sent you and the price will be good.

Problem solved

Hello Sean, thanx for the reply. I believe the previous owner already changed the gearbox oil (not sure what was put in though) and problem still remains.

Dont know if its of relevance but car is putting out 250rwkw and has a Exedy heavy duty clutch with plenty of meat on it.

Edited by iwanta34gtr

Rouse Hill? Call Unigroup Engineering, talk to Yavuz, tell him you need redline shockproof put though your gearbox for you and book it in. Mention that the club sent you and the price will be good.

Problem solved

Thanx for the tip. I will call them on Monday morning.

I was researching the fault and found reference to redline shockproof in this thread - http://www.skylinesa...chros-5th-gear/

I also see the seller of the car made a post in there back in 2008 so looks like this faults been present on the car for a few years.

Are we sure that shockproof will make a difference? All other gears are fine. Its just 5th.

Thank u again i really appreciate ur help.

Edited by iwanta34gtr

I haven't stripped a 25 box for a while but I think you can get rev and 5th off without pressing everything out of the centre plate.

From memory the genuine Nissan parts are not cheap it will probably cost between $400-$600 just in syncros, bearings, seals and oil etc. Just to do a quick repair.

Don't take this as gospel but it might be work asking the question if it can be done, good luck.

Thanx for the tip. I will call them on Monday morning.

I was researching the fault and found reference to redline shockproof in this thread - http://www.skylinesa...chros-5th-gear/

I also see the seller of the car made a post in there back in 2008 so looks like this faults been present on the car for a few years.

Are we sure that shockproof will make a difference? All other gears are fine. Its just 5th.

Thank u again i really appreciate ur help.

Its the common fix for crunchy boxes, well not a fix, more of a band aid. It costs a lot less than buying all the parts and fixing the box internals so most owners will put the oil in (nickname is smurf blood due to the colour) and live happily with it

Fantastic Steve, thanx again for the info.

I asked the seller and have gone through some service receipts. The box currently has Royal Purple synchromax in it.

Is this good quality? Or is it still worth changing to the shockproof stuff?

Royal Purple is good stuff.. its quite pricey too, if you can live with it till your next gearbox oil change do it then otherwise you can spend the $100 and try the smurfs blood to see if it makes it any better..

Thank u, I called Uni group today.

Yavuz isnt there for a few days but I spoke with one of the guys and he said he is not sure if the Redline will make a difference. And its $120 per litre and will need approx 2 litres of it + will cost $50 to put it in.

Might just live with it for now, until it gets worse.

Hello fatz, Thanx for the info.

Looking at the oil thats in it, the receipt says its 2.5 years old now.

And ive noticed that it only happens around 15 mins or more in to driving. When its cold it doesnt seem to do it.

And I have been doing gentle shifts, it still resists very slightly but no massive crunches.

Thinking about giving the shockproof a go because im thinking when oil gets warm, it thins out. Maybe this is why it doesnt happen when its cold?

Hi there, Is it weird that it only affects 5th?

Ive seen JustJap have a whole gallon of shockproof for $99. I might just grab some and do it myself.

I'd risk $100 and try it out and maybe get no result - just 2 feed curiousity really. But i cant afford to risk the $300 it would cost to take it 2 a shop to have done.

Hi there, Is it weird that it only affects 5th?

Ive seen JustJap have a whole gallon of shockproof for $99. I might just grab some and do it myself.

I'd risk $100 and try it out and maybe get no result - just 2 feed curiousity really. But i cant afford to risk the $300 it would cost to take it 2 a shop to have done.

No it is very common to have 5th and rev play up first on many boxes as it is the furtest from the centre plate.

There are a few online stores you can get the redline oil from cheap per quart.

Hi, I am going to get some redline shockproof.

Noticed that there are 2 types - lightweight and heavy. Whats the difference?

Which one should I get for my car / problem and how many litres / quartz would I need? Thanx heaps.

Edited by iwanta34gtr

Thanks for the clarification David. I was going to go with the heavy as it states its for problematic gear boxes and mine gives the slight crunch and resistance.

http://www.redlineoil.com/product.aspx?pid=44&pcid=8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
    • Don't do what I did, use a 300000km old housing with billet gears. The old pump probably was clearanced with saw dust, Edward Lee's special engine treatment sauce and a good odo wind back. I had oil pressure issues, then replaces pump with new housing, new billet gears and 2x track day later binned a motor due to other oil related issues due to a previous engine builder. Long story short, buy a M2 or 3 or 4 N55/S55/S58 and enjoy life.
    • Yeah. "New pump" does not have to mean "massive pump".
    • Well, can you still get an OEM pump, and by the time you're buying a Nismo/N1 etc, just buy another aftermarket pump. It's better to have the pump able to flow more if its needed, than for your pressure to drop off. At any point in time, you're replacing the oil pump in a rebuild. Aftermarket pumps are likely going to be a better economical choice, and they don't have any negatives, even if they can flow more.   Also, when you're saying "replace the pump gears" are you meaning leave a 25+ year old housing in the engine with unknown wear, and just put new gears in? As that sounds silly to me, especially if you do have that minute amount of wear, that means your new pump gears now have a little bit more clearance beside them, which means, whelp, you may not get to build a lot of oil pressure or make a lot of flow.
    • Right, but if you replace the pump gears + put a spline or sine drive gear on the crank on a Nismo/OEM/N1/etc pump at that point do you really still want more flow/oil pressure? Let's say this is a the aforementioned "keep it simple" build, no more than ~400 kW at the crank.
×
×
  • Create New...