Jump to content
SAU Community

Recommended Posts

if the o2 sensor does nothing or its still bad afterwards check:

coolant temp sensor - the 2wire one, can be replaced with any of the same colour

cam timing - my 32 was a tooth out, didn't realise and wondered my the rb20 was such a pos, the ppl i sold it to worked it out and it goes wicked sick now

also, i think i got about 700 out of a tank once with my turbo brick, but my tank holds about 65 litres

just change the motor for an rb25neo

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Hey the afm has been cleaned and im all very jealous of your fuel economy, i had a chat to the old skyline owner and he said his fuel was about 350k to a tank and it went down to about 200k once and it turned out to be the afm. He suggested replacing it with a new one and do the O2 sensor. The coolant temp sender does work but seems to read a little low so i will change it. what ones work ? the reason my mechanic is finding it so hard to diagnose is it runs well and goes hard. He says most fuel economy issues are with cars that run crap. Im going to get a mates r32 on the scan tool as well and do a compare on everything. Ill also get the injectors tested soon maybe thats why the idle hints slightly because its getting an irregular spray of fuel

you say the temp reads a little low, now issues with the clutch fan? my little bro's 32 had a stuck clutch on his, and it made his economy bad. but having said that his car was slow and loud and cold because of it.

  • 2 weeks later...

hey guys as far as i can tell the ecu is stock. my clutch fan is in working order and from the sounds of it injectors will appreciate a proper clean :) ill keep you posted. Thankyou everyone who has contributed to this topic. I have just scored a job and it seems like its going well. Oh and got a 8 week payout for un fair dismissal :P The first things i will do with my first pay check will be an O2 sensor and MAF these are the one im looking at. probably like most im looking to spend the least amount of many but still get semi decent stuff ( I know thats near impossible ) This is the o2 sensor can anyone confirm if it fine for rb20det as it says rb25 but apparently they are the same

http://www.ebay.com.au/itm/NEW-Nissan-R33-Skyline-NX-N14-N15-Pulsar-Oxygen-Sensor-/150616354975?pt=AU_Car_Parts_Accessories&hash=item23116f309f#ht_2856wt_1270

And the MAF ( cheaper through the US because the aussie dollar is so strong)

http://www.ebay.com.au/itm/NEW-MASS-AIR-FLOW-SENSOR-MAF-89-95-SKYLINE-R32-R33-JDM-/400203344207?pt=Motors_Car_Truck_Parts_Accessories&hash=item5d2dfa694f#ht_2925wt_1270

what do you guys reckon ?

I wouldn't touch that AFM, looks too cheap to be true, and who the hell is "AIP Electronics". There's no gaurantee has the exact same calibration as a genuine JECS made AFM.. I would only go with genuine AFMs made by JECS

i'd try re-soldering your current afm before you try that one

maybe unplug your o2 sensor for a tank and see if you get better consumption

and deffinately get onto that cool running (check thermostat too? you can run an r33 one but its 82dec not 87 like r34's run)

in the tridon book it says 82

but i got a nissan r33 one with my timing belt on it and it said 76.5 i think

both run at about the same temp tho, so maybe they rate it differently (opening vs fully open?)

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...