Jump to content
SAU Community

Recommended Posts

Hi there, I'm an 18 year old P-Plater living in Queensland and lately I've become interested in purchasing my first car. I've been interested in Skylines for years and now I've found that owning one isn't as impossible as it once seemed. I'm not about to make a rash decision when it comes to purchasing a car, and for that reason I've been thoroughly researching just about everything I can get on Skylines which naturally lead me here. I've already searched the forums to answer a lot of my questions but I figured it would make sense to also ask a couple of my own. So, after looking around Carsales.com.au I'm leaning towards a GT-R34, but before I decide I need to voice a couple concerns I've had.

Fuel Economy: Not the biggest issue, if I have to pay more than an ugly small car to get from A to B that's not a major problem, from what I've read most people are getting 11 - 13L/100km. Most of those are going to be Turbos so my question is would a non-turbo use less fuel, and if so, how much? Would there be a noticeable difference in fuel consumption?

Aesthetics: Why I love the R34 in particular is the Z-tune front bumper, I realise that not a lot of cars would have a genuine Z-tune, but anything similar aesthetically is really what I'm looking for. The stock R34's with the basic front bumper look incredibly ugly to me. So should I just try and find a Skyline already fitted with a body kit? I'd imagine it'd be expensive to find a body kit and have it painted to match the car, even if I fitted it myself.

Things to watch out for: I'm aware that at 12 years old, the average Skyline isn't exactly new, even when kept in immaculate condition by the owner, what is likely to go wrong engine/drive train/brakes wise after I've bought a Skyline?

Thanks in advance, if I don't make sense in some parts it's because I'm still learning all I can about Skylines, and when they have so many iterations and modifications it gets a little confusing as to what name is referring to exactly which car/parts!

haha my bad. still, i'd say forget the gtr, depending on what state you are in, you'll be stuck with an GTS of some description. dw you can still get ztune style kits for em. you'll only have to shell out a kidney or two :P

Yeah thanks for the info guys! I don't have a keen eye for this GTR GTS GTT stuff yet so when I type in "GT-R34" I get god knows what. Basically I'm in it for a looker, performance would be nice, but it's not exactly affordable for the time being, especially being on P's with the non-turbo restriction.

^^^ agreed, thats how I took it.

If you want a car just for looks, then its all sweet, get yourself a 34GT. You seem to know a fair bit of info already, and have youre head on straight. Gathering that youre going to wait out the p-plate time until you get a high performance car.

Good luck and show pics when you get it.

Are you sure on your Ps, you seem a bit too sensible... Will be cheaper to buy one with a bar on it, but good luck.. Accept the fact that you will be driving a car that is slower than pretty much every Falcadore EF onwards, but seriously, how often will you be racing them anyway... I bought a Stagea because a GTR was out of the question and never regreted it, price insurance, and if you are still keen get searching!! And welcome aboard

Hah as it happens I did mean a R34 GT, I've seen just about every combination of letters involving R, 34 and GT over the last week so when it comes to describing exactly what I want it can get a little confusing! Yeah for now I just want a nice looking car to get around in, I've already read that R34's aren't the fastest car around, but then I won't be doing any racing (legally or otherwise) anyway.

A mate of mine just bought a black 34gt on his p's, the thing sounds good, looks good, handles nice and the interior on them are very comfy. Honestly, they are a nice car to drive, but arnt terribly fast at all and eat fuel like crazy, especially because it doesnt have the turbo to get it up to speed.

So should I just try and find a Skyline already fitted with a body kit?

You seem to be responsible & welcome!

The primary objective is to get a really good, rust-free and well cared for Skyline in the first place; then build on that as a base.

Take a mechanic/panel beater friend with you as you inspect + you'll have your own checklist (so you're focussed rather than caught up with the emotion).

Im a P plater aswell. I havent made the smartest descisions when it comes to cars but i can give you some advice.

1. I would steer clear of body kits, purely for the fact of we are in-experienced drivers, and 'kit' driving can take quite some getting used to. Fiberglass is very delicate compared to the stock plastic bumpers and can crack at the smallest of impacts. I had a full kit on my nissan exa, and after i got rid of it i swore i would not buy another kit until i was a crapload better at driving.

2. Find a car which is what i call 'granny spec'. Untouched, unmolested and not modded. Stock as a rock in other words. I have seen some dodgey backyard jobs and its not worth it. They may be harder to find but i swear to god its worth it.

3. This isnt really advice for finding a car, but more for when you get your car. When modding your car (im guessing that you will) keep the mods clean. Dont go and mount fully sick neons everywhere. Keep stuff tidy, maintain your car well. And if you feel that a job is over your head, dont do it anyway. Chances are you eff something else up which will lead to more $$$

4. Also keeping your car legal is also important. P plater + import = harrasment. I drive a R32 GTS and get pulled over now and then, and there is nothing better than knowing that the poilce cant defect you for anything.

Hope this helps, Mitch

Im a P plater aswell. I havent made the smartest descisions when it comes to cars but i can give you some advice.

1. I would steer clear of body kits, purely for the fact of we are in-experienced drivers, and 'kit' driving can take quite some getting used to. Fiberglass is very delicate compared to the stock plastic bumpers and can crack at the smallest of impacts. I had a full kit on my nissan exa, and after i got rid of it i swore i would not buy another kit until i was a crapload better at driving.

2. Find a car which is what i call 'granny spec'. Untouched, unmolested and not modded. Stock as a rock in other words. I have seen some dodgey backyard jobs and its not worth it. They may be harder to find but i swear to god its worth it.

3. This isnt really advice for finding a car, but more for when you get your car. When modding your car (im guessing that you will) keep the mods clean. Dont go and mount fully sick neons everywhere. Keep stuff tidy, maintain your car well. And if you feel that a job is over your head, dont do it anyway. Chances are you eff something else up which will lead to more $$

4. Also keeping your car legal is also important. P plater + import = harrasment. I drive a R32 GTS and get pulled over now and then, and there is nothing better than knowing that the poilce cant defect you for anything.

Hope this helps, Mitch

+1. Listen to this guy.

Hah as it happens I did mean a R34 GT, I've seen just about every combination of letters involving R, 34 and GT over the last week so when it comes to describing exactly what I want it can get a little confusing! Yeah for now I just want a nice looking car to get around in, I've already read that R34's aren't the fastest car around, but then I won't be doing any racing (legally or otherwise) anyway.

this is true. expect to get beaten by commodores and falcons if you decide to give it a squirt off from the traffic lights and they do the same

Not sure if troll... or if law of averages finally lead to one sensible P plater...

Everyone in this thread has had excellent points so far.

I just want to throw a wrench into the works for you mate. R34 at 18 years of age, turbo or not = raped by insurance companies. Have you priced up insurance yet? Make sure you go quote crazy man.

If on the off chance they are going to sting you for a left net and your kidney, it may be well worth your while looking at an Australian delivered S15. Now, yes I know it's not a 34, but it's the 34 of the Silvias, and a LOT of people over the years have tossed up between S15s and R34s. They're still a great looking and sounding car, and provide you with THREE bonuses over an R34. These are they:

1. 4 cylinder = cheaper rego

2. Australian delivered means cheaper insurance than an import.

3. A bit smaller than a 34 (good for when you start out driving). I don't know if you've driven or even sat in a Skyline... but they aren't small cars by any stretch of the imagination. There will be less "...can I make that?" moments in an S15 in carparks as they're a bit more nimble at low speeds too... Skylines are fat disgusting slugs in carparks/3 point turns or any other slow speed manoeuvres.

Ultimately up to you. Just thought you might like a dose of my hindsight of having a tank (XD) for one of my first cars.

Edited by Isola

Get it and throw a massive turbo on it, screw the P Plate laws they're just stupid. Believe me with a turbo the girls will throw themselves at you. Try to hide it in the trunk or somewhere under the seats or just run a 1000 shot of NOS like in 2 Fast 2 Furious, don't forget to scream "Gotta go dogg" when you school a "nOOb". Stickers and a subwoofer are must haves, stickers will give 20-50hp depending on which ones and how big they are. A subwoofer will get the chicks attention. If a cop tries to harass you remind him that you're a G wid a Skyline and that you're "connected". Play the music below and you will be DK.

http://www.youtube.com/watch?v=mR8KRBWKIoI

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Given you already have the engine cross member to match and likely gearbox mount to. The SR20 has a head start on the RB in this case. They handle GREAT with an SR20, lots of fun.   One I did back in the day
    • have no doubt and wanted too trust me and may regret later not necessarily worried about weight (would be 8 kg ish total) it was more the $$ to do it properly is about $6 - $7K in hardwear need long 310mm stroke jacks etc - plus install and call me whatever im not doing it myself even if wanted too cant weld etc  - thats $10K installed vs fraction of that cost while Ive spent some money on this POS I actually really dont like doing so unless its got a large chance to make me go faster 😁 hey in still carting this things around on a 15 yr old rusted open trailer so I can spend on racing not buy a new trailer to look better the manual jacks Ive had done are heavy and take space but are transportable and usable anywhere - taking or organizing even compressed air let alone nitrogen which is more whats needed coming from Perth to Winton or Sydney or the like honestly just adds to my brain headaches/ hurts of organisation also ha 15 mins job will get down to 2 - 5 min job vs 1 min job for airjacks - all tradeoffs I spose
    • Purely out of curiosity, how do you know all this @dbm7? Do you work with automatic gearboxes professionally? This goes way way way beyond "I've had an automatic Skyline once and did some mucking around"
    • I'll just reiterate that it's best to do all the wiring diagnostics, before even thinking about buying replacement solenoids ~ that is, be absolutely sure the solenoid is bad.....ie; bad connector(s), rodents chewed through a wire, etc etc. If you don't so this, you can fork out all the money for solenoids, only to find something else is wrong (this'll make you cry if you pull the valvebody only to find a broken wire is at fault... ...some more glue on the solenoid packs -- this is the RE5R01A shift solenoid assembly.... ...these are all shift solenoids ~ ostensibly they're the same as the shift solenoids from the 4-speed auto.... ...this is the RE4R01A solenoid set... ...with these, you have 3 shift solenoids attached to the plate, and the separate solenoid is the EPC solenoid (line pressure control) -- with both designs, the TC lockup clutch solenoid (also PWM so they could slide the clutch shut), is located on the lower valvebody half.... ...(story time)...back in the 90's, it was a common fault that the EPC solenoid (or TC-lock solenoid) would fail, but Nissan only sold them as part of the assembly (think ~$350 at the time) ~ thing was, Isuzu also used these boxes in light commercials, and you could buy the PWM solenoid as a separate part, so it was possible to buy/use that solenoid (around $65), and make it fit (remove the circlip, fit to old plate and deal with wiring)...making it a more cost effective repair. I've not seen the RE5R01A shift solenoid assembly, but with the 4-speed RE4R01A it was possible to hack/fit a single shift solenoid onto an other working set, using a donor solenoid from another set with failed EPC....(by rights the whole set should be replaced), but it ends up being a question of how much life is left in the box itself ; sometimes it's a viable repair to fix one solenoid, just to get another 100k of road miles out of it before it needs first overhaul...other times the box is that old/worn, you're as well doing first overhaul and replacing the solenoids and starting fresh... What Nissan did here with the 5-speed, was relocate the EPC solenoid to the lower valvebody (next to the TC lockup solenoid), and stuck the direct-drive clutch solenoid (for the extra gear) where the EPC solenoid used to be on the 4-speed....I can only imagine they did this for serviceability ; the PWM solenoids are most likely to fail, and it's a doddle to drop the pan and change these out (as opposed to dropping the valvebody itself to get at a top mounted EPC)... ...also keep in mind, that some BMW 3/5 series & Mazda (and maybe some Ford/Mazda rebadges, not sure), also used the RE5R01A box under a different name/part number...not saying parts availability is any better, but sometimes it helps to know this when it comes to NOS floating about in the EU.... HTH  
    • FWIW, air jacks are actually pretty light and simple to add, they are just 4 hydraulic cylinders (often at the main cage A and C pillar points) and an externally accessible airline  - they make quick work a breeze
×
×
  • Create New...