Help Sourcing Non Genuine Front Lca

[D-limo]

Pretty sure my front left ball joint is buggered. Going to get it fixed when my new Jenesis coilovers go in. Does anyone know where to buy the non genuine front lower control arms from, or just a part # would be great.

Thanks,

Edited October 11, 2011 by D-limo

[FJ20DR30]

does it have spring loaded ball joints?

[D-limo]

Not sure.

Only know they come pre-installed in the LCA.

[ydr030]

i got plenty of ok 2nd hand ones, but if u want new i got from repco, and sum from peps.

[Ghostrider]

J, just walk into any reputable parts store up there like Auto One, or Auto Pro, or maybe Repco and tell them you want the Taiwanese R30 copy lower control arm and it should cost you about $70.00 each, give or take.

You could call

Mekong Auto Spares

42 Canley Vale Rd, CANLEY VALE, NSW

phone: (02) 97240691

And I'm sure they will help you out and post them to you if you cant get them locally, or worst case scenario, drop me a line and I'll buy them & ship them to you.

Cheers, D

[Factory 5]

http://www.ebay.com.au/itm/Nissan-Skyline-R30-81-86-Control-arm-lower-inner-F-/190513192391?pt=AU_Car_Parts_Accessories&hash=item2c5b789dc7

Get some of these while youre at it too....

Oh and loctite the bolts, On a few R30's I have found the nuts were loose, one was missing!

[Ghostrider]

http://www.ebay.com....=item2c5b789dc7

Get some of these while youre at it too....

Oh and loctite the bolts, On a few R30's I have found the nuts were loose, one was missing!

What a croc of shit, Poly bushes are a pain in the ass unless you like pulling your suspension apart every couple of months.

J just stay with the lca's as they come.

D

[D-limo]

Cheers, I'll look into it.

[Factory 5]

Hey let us know what you come up with!

[D-limo]

Will do. New whiteline swaybars ordered and custom roll center adjusters located. Should handle well when it's all sussed.

[Ghostrider]

Another PM sent

[66yostagea]

http://www.ebay.com....=item2c5b789dc7

Get some of these while youre at it too....

Oh and loctite the bolts, On a few R30's I have found the nuts were loose, one was missing!

Yes. Recently my manual got the rattles and was loose nuts, R30 not mine, and a bolt missing.Didn't loctite but will go do that now.