Jump to content
SAU Community

Recommended Posts

4k manual TT will be a piece of shit IMO. Been a while since I looked at zeds but the manual TT always held their value pretty well; I'd be shelling out ~10k for a decent one.

As for the pay side of it, a 3rd year apprentice on an EBA job makes more than a domestic A grade, so unless you own the business or you're doing work on the side, there's no comparison in the pays.

My mate is 3rd year and on $40 an hour....

Reminds me of Ruffels... mother f**ker is rolling in it

4k manual TT will be a piece of shit IMO. Been a while since I looked at zeds but the manual TT always held their value pretty well; I'd be shelling out ~10k for a decent one.

It must be cheap cos the engine is still in

Yeh I did start about a month or so ago, don't get me wrong I'm definately seeing results just want that little bit more, I guess I gotta work that little bit harder and eat that little bit better / more. Guess there is no tricks for speed other than that or roids as Alex said :P but then you get shrinkage amirite?

Just eat lots and work out really.

Or drink lots of milk if you can't stomach the food.

Where's he working? Big company or got his own business?

Seems to have a few cars/bikes/boats...

He's with an agency (Frontline)... 4th year atm I believe, but he's EBA/commercial so as you said the money is off the chain.

Yeah too many toys for his own good lol

If global economic climate doesn't improve I think these unions will have priced themselves out of jobs my mates who run the major sites are not getting any work laying kents off left right n centre it costs to much to build in Victoria sure u get the odd cash cow west gate / desal plant when it's good it's good but I had mates on west gate before that no work for 6 odd months was doing handy man shit to keep busy and earning

And before anyone has a cry, I'm not paying out on domestic, just saying there's more to it than those that want to learn more and those who want more money...

In the end of the day, it's worthwhile if you enjoy the job.

For me, I'm not picky as I desperately want to leave Coles so anything better than domestic is a bonus.

lol if you're an A grade with your own business running domestic and making less then commercial/industrial then there's something seriously wrong with your business

I know of domestic A graders making on average $10K+ a week clean in hand ;)

lol if you're an A grade with your own business running domestic and making less then commercial/industrial then there's something seriously wrong with your business

I know of domestic A graders making on average $10K+ a week clean in hand ;)

$10K a week. Sheittt...

Do they all drive Fezza's and Lambos too?

lol the engine bays all been resprayed, not worth the asking price imo.

I wouldn't pay 15k for ANY commodore, let alone one that's 23 years old... but it's a fair way better than all the lebo spec thrashers out there

If global economic climate doesn't improve I think these unions will have priced themselves out of jobs my mates who run the major sites are not getting any work laying kents off left right n centre it costs to much to build in Victoria sure u get the odd cash cow west gate / desal plant when it's good it's good but I had mates on west gate before that no work for 6 odd months was doing handy man shit to keep busy and earning

I dunno...Safety (employee and environment) is a big thing these days...The little guys aren't gonna get the big jobs because they aren't up to the standards the big builders demand...

lol if you're an A grade with your own business running domestic and making less then commercial/industrial then there's something seriously wrong with your business

I know of domestic A graders making on average $10K+ a week clean in hand ;)

I did say 'unless you own the business'...

when it comes to timing belt time? =(

Yeah :/ replacing all the external belts wasn't too bad with the radiator out though.

4k manual TT will be a piece of shit IMO. Been a while since I looked at zeds but the manual TT always held their value pretty well; I'd be shelling out ~10k for a decent one.

Quick look at Carsales says you're probably right. It'd still be alright to thrash about in till it went bang though.

Yeah :/ replacing all the external belts wasn't too bad with the radiator out though.

Quick look at Carsales says you're probably right. It'd still be alright to thrash about in till it went bang though.

its not like a soarer where the 1J is cheap as chips.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...